Screen Printing: Small Manual Textile Shop Electrical Tips

[@yrd4snd]

Excellent Video, Jon... A couple of things to add. I recently remodeled a storage area over my two car garage (540 sq ft) and had a licensed electrician come in and we discussed my electrical needs. I ended up with a dedicated 20 amp/110 volt circuit for my flash drier. This was suggested by the manufacturer of the piece. On my heat presses, I opted for the wall outlets to be on a 20amp/110volt circuit. I plug them all in, but find I only use one at a time, so it won't overload.

[@danielsam1959]

muy importante este video. nuestros equipos electricos y nuestra instalacion deben tener los dispositivos adecuados de seguridad . nuestro taller maneja químicos, agua y electricidad que pueden provocar accidentes. Exelente tus recomendaciones Gracias :)

[@CatspitProductions]

Thank you! Yes, this is a very basic KZbin video if you get the drift. Each unit you hook up uses different amperage and will require the specific fuse for that amperage. Thanks for your detailed input. I’m sure it will help others. Thanks for watching and leaving a comment! ☠

[@CatspitProductions]

Thanks, glad you liked it so much. Yeah and this was a brief overview so I hope it helped out some. Thanks for watching and leaving a comment! ☠

[@CatspitProductions]

Thank you! My pleasure. Thanks for watching and leaving a comment! ☠

[@DennisIsAMenace]

This was a great video! You definitely went over an overlooked part of setting up a shop!

[@CatspitProductions]

Skateboards are rarely screen printed anymore. It’s a computer printed shrink wrap type of thing these days. Not to say you couldn’t print a skate board but it would require a gig. I think I saw a video here on KZbin who used a jig to do it. It might be in my favorites. Thanks for watching and leaving a comment! ☠

[@CatspitProductions]

Thanks, glad you liked the video. Always best to be on the safe side. Thanks for watching and leaving a comment! ☠

[@ppdlao]

cool tips! thnks Jon!

[@mahousel]

other then the Heat press what other lines should be dedicated for your equipment? Also did you have to have any additional power ran to where you have your shop?

[@canuckchris2010]

jon did you get a new dryer? thanks for all the tips over the last year. i find myself refurring back to all these video's. thanks again........chris

[@RICKYOMEN]

can you do one on how to screen print skateboards?

[@josegonzalezconmilogoo]

la insoladora que aparece en el video es casera.

[@CatspitProductions]

No, all of this equipment is mad by Ranar. I am a dealer for Ranar. Thanks for watching and leaving a comment! www.catspitproductionsllc.com/ - catspitscreenprintsupply.com/

[@CatspitProductions]

Any equipment that might draw like the heat press and the flash cure I think if it’s 110. It’s all normal 110 except the 220 line I dropped in. No additional power except what was there. Thanks for watching and leaving a comment! ☠

[@CatspitProductions]

LOL.... jig ☠ You only need a gig so there is a reason to print some boards... :)

[@Flamingcobra98]

mice

[@CatspitProductions]

:) Thanks for watching and leaving a comment!