Church Video Gear for Streaming - (UPDATED VERSION IN VIDEO DESCRIPTION!)

[@michaelbruchas6663]

Go, Owasso! From a former Okie (KTUL and KOTV - long before you were born) who worked years ago with a Nazarene Church in VA - with another OETA friend. Our productions were much simpler. Services and concerts were archived to Betacam or to DVD. This was before webstreaming. We had 2 older broadcast Sony/Thomson ENG cameras... I am impressed with your camera choices. Good planning!

[@CBCowasso]

:) Hello to a fellow Okie.

[@andrewyang4319]

Thanks for sharing. I was looking for way to do live video for our church.

[@tanoshireaccionresub334]

Hello friend, one question, do you recommend the Sony a6000 for long streams, I have a little doubt and fear since I do live streams on twitch and they are long maybe 4 or maybe 6 hours and obviously the camera will be connected to a fake battery connected to the electricity all the time, that's why the reason for my fear when streaming I don't know if the camera overheats they told me that the Lumix G7 doesn't overheat in video and I don't know which one to choose I would appreciate it if you gave me your opinion, I hope see your answers, thanks.

[@dougtaylor7724]

Thanks for sharing the setup. KZbin is so full of high end setups that are just so out of reach for people on a reasonable budget. Most folks just want a descent setup that switches and records in 1080 as they are not trying to broadcast the Super Bowl. Thanks for you time!

[@Sheba_316]

Doug Taylor 🤣 yes

[@ItsKarenReyes]

Thank you so much! you have been such a blessing to our church. With just simple solutions were looking for you covered in the video! God bless you and the church for being so generous with your knowledge!

[@ryandusek5928]

This was my biggest help in getting our setup together. THANK YOU! Hit me up if you can, I have a couple questions!

[@jeremythomas1803]

Hey Ryland! I booked a session to speak with you about a video upgrade we're doing for our Church. Looking forward to speaking with you soon!

[@destinfarr]

I highly advise recording in 23.976 fps (24). This will allow a much more natural motion blur. Of course, following the 180-degree shutter angle rule. In this case, 1/50. Contrary to what was stated in the video, this is very easily managed in post-production. Simply make your timeline and monitoring to be 24 fps.

[@CBCowasso]

24p is a great framerate, and we use it all the time. Especially when mixing with 60p slowmotion at 40%. But use whatever frame rate you prefer, and honestly don't be too hung up on the 180 degree rule. "cinematic" motion blur in a church service is not really that different than 29.97. We shot at 60p with a shutter speed of 60 forever, no big deal. Now we do 29.97 at 60 shutter and it's really not much different. Try out different frame rates and see what you like best.

[@destinfarr]

@@CBCowasso Speaking in regards to an industry standard, and a very keen eye on noticing the visual flow; 60fps is very apparent and gives more of an amateur/soap opera appearance. 30fps is permissable but still not as good as 24fps. There's a reason the majority of movies and shows use 23.976. We've mixed these rules with various cameras over the past, and people that don't know film are actually reaching out and saying they like the look of a particular camera better, and it's the one that I'm properly setting with 24, 1/50. There's a reason film experts have stood behind this for many years :)

[@CBCowasso]

destinfarr glad it’s worked well for you 👍🏻

[@RJHN9108]

Love the sound and image quality

[@CBCowasso]

Thanks Rick. Be sure to check out the updated setup video in the description.

[@surflinkservices8874]

Wow! This is a really big channel! So resourceful. It is the first video I commented on after watching so many helpless videos today! Blessings!

[@jong3174]

Any way you could send me a still frame (or a minute marker on one your YT live streams) of what your camera 1 (GH4 35-100) looks like? And how far is it positioned from your stage? We’ve had a GH4 for a while but have a prime lens since we only used it for interview style shots and now are looking for a similar set up to the one you have. Would really appreciate it. Glad to see it’s working for your church!!

[@dmanalang9037]

I had no idea how to start and how. I do now, thanks to you!

[@toddmac1664]

Very smooth delivery of this topic. You're a good teacher. Thanks.

[@gwillacey]

Love the part about involving the next generation!!! Yes Yes Yes

[@HervormdAalburg]

So you are using your panasonic camera's without autofocus? So what are your settings then? How do you use manual focus with the camera's? currently have autofocus setup with face detection, but want to know more about your setting with manual focus. Thanks! I a panasonic G 25mm 1.7 with a Panasonic G7 a good start setup? Or better an other lens? Thanks, great video and nice setup!

[@YeshuDarbarAllahabad]

How can I use my Canon Vixia HF G50 for live streaming at our church and how? Thanks

[@rileyworley7758]

You can use the HDMI output to connect to a Blackmagic ATEM Mini (or other capture cards) and plug it directly into your computer. The ATEM Mini allows the camera to be recognized as a webcam by the computer, which you can then use as the camera for your stream

[@jvaldez2006]

This is what I'm looking for our new small church in the valley, Texas. Im in charge for multi media and art of our church. Pastor Rylan, I hope you can help me decide which camera to buy and used for live streaming. I hope to here from you soon. you response is highly appreciated pastor...God Bless

[@CBCowasso]

Thanks for watching. As far as what camera to get that depends on a few variables. Budget, use case, low light, multi-use, manned/unmanned etc etc. Hopefully my video helped some.

[@shanelaw7476]

The video is very helpful. Thanks a lot. Kindly help with the iPhone and stop watch...? How is it hooked up on your system?

[@eighttone]

I've gone HDMI out from my Nikon D810 and the thing I dislike the most is the auto-off after 20 minutes, I think it is. Do the Panasonics you mention have an auto-off timer and what is the max time? Or do they stay on (output HDMI) indefinitely?

[@rylandrussell4068]

Timothy Dutton they stay on indefinitely

[@AVvideography]

Great video! Appreciated if you please share how do you wireless the camera with a long lens (canon)

[@johnhambrick2623]

All this terminology is new to me. I have filled out a grant per your advice. The one question I didn’t ask is, how is the audio/video getting to the mixer in the control room. Are you using vMIX, OBS or Ecamm Live? I am just up the road in Bartlesville. Could I get a tour of your set up?

[@CBCowasso]

John Hambrick hello to a fellow Green Country friend. We have a video breaking down our audio setup. kzbin.info/www/bejne/jn-kq3xrh9mDmZo. We currently use MimoLive from Boinx and have been very happy. Justbroadcaster was great for years though as well. Once our building is open again after the pandemic I’d be happy to give you a tour.

[@sotelocreativemedia]

I have a huge question. Can I use multiple Nyrius Aries Pro - Wireless HDMI Transmitter in the same building? Right now 3, but maybe in the future we might add more.

[@KaradactylGrace]

Just kidding I’m not putting an intro in this video 😂

[@flipping_for_funds]

Great video but what’s up with the dimmed lights, colored lights and the spinning lights on the ceiling? Looks like a concert.

[@dcdubs1943]

Interested in knowing how you are able to switch your sources using the NUMpad. Would greatly appreciate anything you can share.

[@CBCowasso]

That is built in functionality to the ATEM Software. It's just easier to use a number pad that the numbers on the keyboard.

[@dcdubs1943]

Thank you!

[@soulwisemedia3265]

Thank you for sharing! So useful. Can you post the link for the $5 number pad?

[@LuisMelvinGonzalez]

Love your sound mix. Thank you for the video.

[@Jeff_G1]

Your video and support have been a godsend for me:)!! I might end up doing the live chat support once i start getting everything in from B&H as I took what you have and set it to an 8 video system.

[@danielmottayaw]

REALLY appreciate this video. Question: I have a Panasonic G85 which is similar to the G7. I have it hooked up to a wireless HDMI transmitter, so the feed is sent to a camera switcher in our tech booth. Is it best for me to be NOT recording from the camera itself? Basically, I have the camera on and in Movie mode... I just never hit the record button. We have equipment recording everything in the booth. Will I run the risk of the camera just shutting off since nothing is recording from the camera itself?

[@CBCowasso]

Daniel Mottayaw that should work great. We don’t record on any of the cameras. Only thing you might lose is autofocus if not recording. I’m not sure if afc works unless you are recording.

[@danielmottayaw]

@@CBCowasso Awesome, didn't think about auto focus in regards to that. Appreciate the quick and helpful feedback!

[@antmanmusic]

YOU ARE A BLESSING MAN!! THANKS

[@mrjenybean]

Great video man. Looking at a g80 for our place. If those e1’s were still £100 I’d buy 2 today! Haha

[@RyanJS08]

Looking to get a G7 possibly for streaming, does it have clean audio output through the HDMI cable? Or do you need additional equipment to capture audio output? Sorry if you mentioned it in the video, still watching it lol

[@OrpheumVideo]

Sorry if you answered this- how are you controlling exposure on the G7 wide shot?

[@reginaldbrown4129]

Watching this 11/23/20. Has the outlook regarding FB Changed? Is all a lot of Churches have right now.

[@sylvesp]

Looking to get camera that we can use to record our service. I am looking at buying a Cannon photo camera because Cannon has released software that allows connecting some of their cameras directly to the USB port on the PC - no HDMI to USB converter needed! That would save $150 for the converter that we could put towards the better camera. The question: What lens do I need to be able to take decent close-up shots from a distance of 50' ? (That is the distance between the video booth and pulpit)

[@mikebollinger4141]

Can you explain what app and connection you used the iPhone clock for? Is that an input into the switcher? Could you use that for a very secondary camera?

[@rileyworley7758]

Hey Mike, I help out with the livestream. We actually just use the iPhone as a way to remind our directors to start the recording. There is an alarm that goes off 1 minute before the service starts.

[@desmondappiah]

Very helpful video. Just put a very similar setup together at our church thanks to your video. I went with the Holy land Mars 300 for wireless. Working very well so far. After the first couple of videos I realized the hyper decks output was too large. All the 256 gb SD was getting used after an hour into the service because the default codec is prores HQ. What codec are you using?. Just switched to H.264 and was wondering if that output will still be good.

[@CBCowasso]

awesome, Yes we use the h264 high. Looks good.

[@FrankETaylor]

Great video! Have you rigged up the cable cam yet and how has it performed?

[@CBCowasso]

The cable cam works great with my osmo pocket. I can't get the osmo into the live stream though as it doesn't have video output. So for now I add it in post when I have time. It could handle my gimbal with a real camera but it does weigh the line down considerably. You can see it in our most recent upload "orphan sunday" throughout the worship time and right at the top.

[@wagiuroger_productions8537]

@@CBCowasso can it handle a smartphone gimbal with an android phone?

[@CBCowasso]

rogerwagiu productions easily

[@LWhaples]

This is really helpful, thank you, Pastor Russell. When you're outputtin HDMI from the GH4 (or GH5) does te on-board view screen still display? On Canon DSLRs, when you output HDMI, the viewscreen is disabled and the operator has no way to see what they're shooting.

[@CBCowasso]

clean hdmi, you have the option to show or not show the screen info.

[@LWhaples]

@@CBCowasso Oh, sorry, I don't think I asked my question clearly. What I'm wondering is if you plug into the HDMI out port on the camera and you're feeding the video to another source, does the digital screen on the camera still show you an image? On the cannons its either the screen OR the output, but not both at the same time.

[@rylandrussell4068]

LWhaples oh I see. Yes the screen still shows the image while outpouring over hdmi.

[@LWhaples]

@@rylandrussell4068 Again, thanks for all the great help! :-)

[@LWhaples]

Do you mind if I ask one more question? :-) How do you get the USB feed from the Marshall on stage all the way back to the deck? USB can't run that far can it?

[@obitamv6292]

Could you do a video on how to hook up everything?

[@SimplyTomasTheCollection]

Thanks, Pastor! You've helped me tremendously.

[@nathanloyd8388]

Hey Ryland, what would we need to buy to make our camera a wireless camera so we roam around the worship center during worship?

[@RylandRussell]

Hey Joshue, I'd recommend either the teradek ace 500 or the spark 4k kzbin.info/www/bejne/gYqTgKR9ed6qqK8 (links in that video description)

[@techsquirrel]

Great video thanks! Question- were you able to run video on the GH5 and G7 cameras longer than 29 minutes? If so could you share how you did that- thanks!

[@CBCowasso]

Robert Rand we don’t record on the cameras. We record on the hyperdeck. But the gh5 does not have a limit.

[@techsquirrel]

CBC Owasso ah- Not about camera recording but hdmi video output- I understood the GH4 could output hdmi video longer than 29 minutes (designed for continuous hdmi video output times) but could not find that capability confirmed on the GH5 or G7. Your experience is the GH5 and G7 can output hdmi video for any length of time without overheating?

[@CBCowasso]

Robert Rand I’ve left them on for days. The g7 has a record limit if recording to card but not on the hdmi output.

[@techsquirrel]

CBC Owasso thanks SO much! I subscribed and recommended you to a church. Best of health and success!

[@arieawp]

Hi ryland nice video. I want to ask, for long duration event, like 5 or 6 hours, is it okay to use mirrorless camera? Will it not have any overheating issue or camera sensor damage if the camera stays on for that long? Thanks for the answer :)

[@CBCowasso]

arie awp if you aren’t recording on to the cameras local Sd cards the cams that we use do not even get warm. Have accidentally left them on for a week on many occasions and no issues. They are powered with dummy batteries.

[@arieawp]

CBC Owasso no i’m not recording on the camera, i also use hyperdeck mini as a recorder, thanks for the answer, real helpful :)

[@ChrisPaulslu]

I would really appreciate your help with sourcing used equipment for my church

[@luisalfredovilla980]

Hi. I congratulate you on your great ingenuity, the guidelines in this video have helped me a lot. How do you go about streaming from the Hyperdeck Studio MIni? because I have read all the blackmagic counts about the hyperdeck and I don't see that it says that it is used to capture and go to the transmission software ...

[@rileyworley7758]

The Blackmagic Hyperdeck Mini has an SDI in and an SDI out, which you can connect to a thunderbolt capture card (such as the Blackmagic Ultrastudio Mini), and you can run that into your streaming computer in order to livestream

[@christianhomembc8120]

GREAT INFO. I learned a lot in a very quick short video. Very informative. Quick question what brand of cable are you using from your mini hdmi to hdmi to maintain HD quality. My concern is I will lose quality running a long cable say 100ft to our AV room. THANKS!!!

[@CBCowasso]

Christian Home MBC you cant run hdmi more than 50ft and that is risky. Convert to Belden 1694a SDI cable. Then back to hdmi again. Blackmagic hdmi to SDI converters are fine.

[@christianhomembc8120]

@@CBCowasso THANKS

[@krepko7]

Very helpful video. Thank you very much.

[@RealBenElmore]

What are you using in newer service's for the track shot over the crowd? Looks amazing!

[@CBCowasso]

Ben Elmore that shot is our cable cam. It’s a wiral lite with a gh4 on a gimbal using wireless hdmi transmitter.

[@RealBenElmore]

@@CBCowasso we're looking into using wireless HDMI, is there any noticeable latency? We also IMAG in the auditorium

[@CBCowasso]

@@RealBenElmore couple frames, but the atem usually resyncs all of the video feeds fine. We don't do IMAG though. I don't think I'd use it for that.

[@frankrmeyer]

CBC Owasso do you have a video about this setup?

[@markdonnery]

How is the wireless hdmi working for you now after some use? Would you still recommend it? I just order the pro plus in Hope's that it will free our camera up.

[@gshan44]

Thank you for putting this together. Really helpful.

[@Jo77We]

I really appreciate this video. Great ideas!

[@ericmelendez5719]

Are you able to add ProPresenter as one of the inputs on the switcher? We want to play our pre-recorded worship through propresenter and then switch to our Pastor preaching live.

[@CBCowasso]

It will accept hdmi or SDI. What I would do in that situation is plug the video into my streaming software as a source.

[@ericmelendez5719]

CBC Owasso Got it. So it could work both ways?

[@walkbyfaithfirsthaitianchu4584]

Thank you my dear brother.

[@MK-ee5qd]

Thanks for your video! Our balcony is 60 ft back; we have the GH4 and the Panasonic 35-100 2.8 -- is that appropriate for that application. We are beginning with only one camera. Is there a lense better suited to that application?

[@rylandrussell4068]

M K that will be great. If you need it to punch in even more use the “tele” punch in option. You probably won’t need it.

[@MK-ee5qd]

@@rylandrussell4068 Thank you, that's most helpful!

[@MK-ee5qd]

@@rylandrussell4068 Hey Ryland, We are having difficulty getting our GH4 mic turned off. We are going through a Black Magic Design Web Presenter. Thanks!

[@mckenzietownechurch]

This video has been a great help for us. Thank-you. I'm thinking of adding a GH4 to the mix of GH5's (I can't afford another GH5 right now) ... have you seen much of a difference in the two?

[@CBCowasso]

If you are just doing 1080 then it's hardly noticeable. GH5 has a little better ISO performance.

[@iglesiabautistaespanolcros6009]

Thank you for the advice. Really I want to take care and save the church money

[@CBCowasso]

Yes, we need to be good stewards. :)

[@TruthSpokn]

I have questions about your key pad and how it links to the switcher? How is your setup for it? Considering doing bit your way.

[@HoriaIonita]

Nice video. Do you recommend the Nyrius Aries Pro as a solution for wireless cameras in the LIVE streaming multi-camera set-up? How is the latency? Is there any noticeable latency between the camera that uses the Nyrius vs the other sdi/hdmi cameras? Are there any drawbacks regarding video/sound quality for the Nyrius? How good is the range and how reliable is the connection? Do you have any problems at all with the product? If I understood correctly, you planed on buying a second Nyrius Aries Pro. Do the 2 units interfere? Is everything running smooth? Sorry for asking so many questions. I am from Romania (Eastern Europe), and after seeing this video a few weeks ago the idea of a wireless camera stuck with me for our church. It seems that the Nyrius will be the best (affordable) solution for us as well, but I need to be sure that it is exactly what we need. In Europe I couldn’t find any seller of the Nyrius, however I can buy it from the USA. Returning it if it is not good enough will be a problem as you can imagine, and reselling will be a hustle. If you can take the time, please give me as many details as possible regarding the Nyrius Aries Pro, or any other suggestions/recommendations you may have. We are using Panasonic cameras for the same cost reasons in our church. I took me a few years of research as well, so I recommend them wholeheartedly. We use 2 FZ2500 (you should check out the FZ2500 as well - motorized long-range zoom + a ~GH4 body for the price of the lens alone), 1 GH5, 1 G85 and I threw in my old Nikon D5200 for the Piano keyboard close-up a couple of weeks ago. If you want to check out our channel, it is called AZSMR Bucov on KZbin (www.azsmr-bucov.ro is our website). Looking forward to your answer. May God bless your work

[@CBCowasso]

No issues with Latency. We recently upgraded the antenna on the transmitter and it made a HUGE difference. We were starting to get more and more dropouts. We do use two simultaneously with no issues. Search Nyrius Antenna and there is a guy who shows you how to upgrade the antenna.

[@HoriaIonita]

@@CBCowasso Thanks for the quick reply. I think that I already saw that video :)) Are there video/sound quality losses compared to the cable connection? Was the cause of the dropouts the distance or distance didn't matter? Do you still get dropouts but not as often or is the connection rock solid with the better antenna? Thanks again!

[@CBCowasso]

Horia Ionita I’ll report back after this weekend with the new antennas. These do operate in the 5ghz band so we had to disable that in our wifi routers. Seems like mainly people and walls cause it as they are line of sight. New antenna looks very promising.

[@HoriaIonita]

CBC Owasso Ok. Thank you very much. The antennas operate exactly on 5 GHz? From what i read, the device should operate from 4.9-5.9 GHz. Is there any way to change the frequency that they use (since you have 2 pairs, they surely use different frequencies)? From the reviews on Amazon, it seemed that both the receiver and transmitter get really hot and then become unreliable. Also, a lot of complaints about them starting to dropout the signal more often as time passed (a few months to a year). Did you encounter the same problems?

[@paulmarchenko1135]

Thanks for the awesome video brother. Are you having any audio sync issues with the wireless shooter ?

[@braveclyde]

Thanks for sharing this very useful video. I see that you have a 35-100 f2.8 on your GH4. Wondering how you manual focus it on moving subjects. I have the same lens on my GH5 and I'm going nuts with the fly by wire focus ring.

[@CBCowasso]

Most of the operators use the touch screen to grab focus with that lens. Or they do the double tap punch in and manually fine tune it.

[@braveclyde]

@@CBCowasso Thanks bro. Yes, we do that also, but only when the artist is still. When he walks forward, keeping him in focus as distance continuously changes is very difficult with that focus ring.

[@42Pros]

Have you used multiple Nyrius transmitters/receivers to send several camera feeds??? If yes, have you had any problems with wirelessly transmitting multiple cameras at the same time? Thanks for sharing.

[@CBCowasso]

42 Pros we have actually been using two roaming camera setups with the nyrius the last 3 weeks. No real issues. Don’t expect them to be perfect. If you get 100 feet away in a packed room you may get dropouts. They say as long as the receivers are 10ft apart you are good. We basically have one roamer on one side of the room and one covering the other side. Good luck!

[@jasonharris7976]

How do you combat sync issues on the latency for the Nyrius Aries Pro wireless connection? Is that adjustable in the black magic? Also, How do you mix audio for your live stream?

[@CBCowasso]

Jason Harris it’s negligible. I believe the atem does a resync somehow of the cameras and then we delay our audio that many milliseconds to match up.

[@TheBrittp33]

Hi! We purchased the same ATEM last year to expand but we only have one camera for now. I lead worship here full time but am clueless when it comes to camera equipment. What is the best second angle shot in your opinion? Is there a camera you would recommend? Would your recomendation change based on the camera being manned/unmanned? Ive wanted to add a second camera even if it was unmanned for now until we built the team up. Our livestream seems really boring with just the one. Hard to get a feel for whats happening in the room. Thanks

[@CBCowasso]

Brittany Masters everyone starts somewhere! If I only had two cameras I would have a safe wife shot and another manned shot.

[@windsteamvideos7188]

Such a great video. What are you using for Camera 3? I didn't see the specs listed.

[@CBCowasso]

The wide shot? We typically use a G7 with the 12-35 2.8 from panasonic

[@windsteamvideos7188]

@@CBCowasso Any other lenses you would recommend for the wide shot?

[@CBCowasso]

Winds Team Videos you could do a prime lens like a rokinon 12mm for micro four thirds mount. Little cheaper still is the samyang.

[@windsteamvideos7188]

@@CBCowasso What camera/lense are you using for the drum shot? Is that setup or handheld?

[@Kuuuks]

Thx for this video, please how did you assign the number pad to control the atem or is it just a default...

[@TechBeardlk]

Hello I would like to know, what it the name which is you are using small keyboard for switching. are there any link to buy it. thank you

[@samxlovegod]

Great video brother thank you so much really really helped Especially with being able to use the cameras in other places other than the church we didn't think of that God bless brother

[@CBCowasso]

Glad to help!

[@spencecrisco376]

basic question here. Weve got the same ATEM and how did you hook the 10-Key keypad up to that??

[@spencecrisco376]

now watching again, i see the atem software running on the computer in the back. so i'm guessing the 10-key is USB'd to that..

[@CBCowasso]

Spence Crisco the 10key is just a bluetooth usb into the Mac mini. It’s just calling up cameras in the software.

[@johnhambrick2623]

Would the Hyperdeck work with the ATEM Mini and looking at the mixer software in the video, does that software come with the ATEM switch you are using. Would the same mixing software come with the ATEM mini?

[@CBCowasso]

Same software for both ATEMs. The hyperdeck can record an HDMI input or an SDI input I believe. So yes, it can work with an ATEM Mini.

[@iamjonathanbarnes]

Hey there... Great video... What are you using for transmitting video wirelessly on the roaming camera? and is it efficient?

[@tamaleaa]

He ever answer this question?

[@PeterVCook]

Looks like he has a reference in the description, the Nyrius Aries Pro - Wireless HDMI Transmitter

[@mertkaracayil]

Great setup brother.

[@UnionGrove]

Hey, man. Hope you're doing well. We're looking into running something like this. How have your GH4's and GH5's held up with the long-term streaming/recording? I know DSLR's aren't really meant for long shots. Just curious if this is a good, long-term option. Thanks!

[@rylandrussell4068]

Used them for years, never an issue. Have even accidentally left them on for days at a time.

[@UnionGrove]

@@rylandrussell4068 Oh, wow. That's awesome. So, you have no issue with them cutting off mid-service?

[@rylandrussell4068]

No

[@KenChristensenHC]

It can depend on your DSLR. I had a Canon Rebel that overheated filming an hour-long event. The Canon I replaced that one with has been able to go longer, and be left on!!

[@FiscalWoofer]

Really great video - clear well researched advice!

[@mathewgoinsamy]

Hi, great video. :) Try a streamdeck to control your ATEM , with Companion software.

[@CBCowasso]

Thanks! Ya the streamdecks are pretty cool. For us we pretty much only use cuts/dissolves so the cheap number key pad is all we need. Maybe if we start doing lower third or specific macros...

[@geoffreygaisie]

CBC Owasso Thanks for this. Can I ask what keypad you use?

[@tenkeymedia]

Great video! On the numeric keypad, did you just setup macros in the atem software?

[@CBCowasso]

You don’t have to do anything you could test it out with the numbers on your normal keyboard it works. I just like having the keypad wirelessly so I can switch inputs from anywhere in the booth

[@tenkeymedia]

I went back and looked at the manual and found it, yes I think that is a great feature and we are similar to you guys. We try and build the most professional broadcast with the smallest dollars. Thanks again for the video very helpful.

[@1dwald]

Great video. Lots of useful info

[@glodymbenga]

Do you think a Canon 600D will be a good choice to start off with for other uses such as interviews, services ? If yes what reasonable lenses would you suggest for very long wide range shots and short shots. Thanks God bless

[@CBCowasso]

IamGlody _ thanks for the comment. I believe there are other low budget options out there that would be better than the t3i. You are limited on your frame rates and it is only 1080p. I’d recommend a 70d if you want low budget canon. The Panasonic g7 will give you a great 4K image for very cheap. There are a variety of cheap lenses available as well.

[@dayquanmaynard2432]

how do you turn off your mirrorless cameras that are mounted on the wall? Do they stay on and plug in during the week?

[@CBCowasso]

All of our cameras are within reach and are powered off during the week.

[@RengieRamirez]

Thanks for all the great info! I was wondering what was the outcome of your testing with the DVX200? Did you end up keeping it integrated with your system?

[@CBCowasso]

Rengie Ramirez yes I’ve been happy with it! I need to do an updated video 😀

[@RengieRamirez]

@@CBCowasso Awesome! I rented 2 of them for the weekend. Hopefully we like them and we'll replace our old HMC-40's.

[@pastoroscarwaithe1264]

Thank you Ryland for sharing. We're a new ministry and wanted to know if our budget is limited and we start with the G7 Panasonic camera, a tripod and a laptop would that be sufficient for the beginning process? All under $1,000? We do plan to stream.

[@CBCowasso]

That will work well I would advise getting a good lens with fast aperture to use with your G7

[@bmrcopeland]

CBC Owasso Thank you. Need a little more detail. Could you call [phone] and ask for Pastor Oscar? We appreciate your help.

[@edufaria77]

Tks may God bless and use more and more!!!

[@TheAwesomeGuy101]

What's the cable cam brand? and How much? curiously asking since that's the first thing I noticed and guess right =) *edit.. wiral lite perhaps?

[@CBCowasso]

Yes the cable cam is Wiral Lite :). With the new firmware it does auto loop back and forth and has been working well for us!

[@TheAwesomeGuy101]

@@CBCowasso Cool, will we see a video of you showing that? just asking =)

[@tabernacleofchristforallna3306]

OUAH you just respond to my prayer . Thank you , I am doing your setup

[@GBClife]

Thank you for this video! It was super helpful! I have one question, how are you able to get your DSLR batteries to run the whole time without dying? Are you running anything special or just changing batteries between services?

[@CBCowasso]

Hey thanks for watching and I'm glad it's helpful! All stationary cameras are running on "dummy" batteries and plugged in. Our roaming cameras will last almost two hours or so on one battery. Gh5/Gh4

[@renerodriguez8530]

What dummy batteries are you using

[@renerodriguez8530]

Also is there any lag on your wireless hdmi

[@SmashTimeProductions]

What is the thing called with the remote camera 2 is on? Sounds like you said “best score

[@dcdubs1943]

Smash Time Productions Bescor pan/tilt. Really good product, but if you can.. I’d recommend the Panasonic pan/tilt. Find a used one on eBay. Either/or are really good. I have one used Panasonic pan/tilt that I control using a remote control from a toy car/drone. Reviews say these will last longer. Again, bescor is great! It’s what I started on. Have had mines for 5+ years now.

[@TruthSpokn]

@@dcdubs1943 Do you know the model number for the two pan/tilt products?

[@madelves]

Wow this is exactly what we are looking for as we just moved into a new building and is upgrading to multi-cam recording... A bit of question regarding recording length. The GH4 has no 30 minute limit for recording, does the GH5 has that limit? I read that some cameras has that to prevent the device from becoming too hot.

[@john-marcedwards9221]

madelves GH5 has no limit. G9 does tho But you’re also not recording through the cameras, just sending the video image to the actual recorder in sound booth

[@madelves]

John-Marc Edwards Thanks. That helps.

[@tranisefoster590]

Thanks soo much for this! How did you do the cabling? I have an old system and I'm trying to work with the SDI cable as well as coaxial cable and I'm not sure how to connect what coming from my ATEM to my on stage monitors, my stage screen & my televisions throughout the sanctuary

[@tranisefoster590]

And also I'm trying to figure out how to connect a source to play pre-recorded video. Right now we use DVDs but we are fine with switching to media files but I'm not sure about how to configure some source for that specifically

[@CBCowasso]

@@tranisefoster590 Cabling: Use Belden 1694a SDI and then SDI to HDMI Converters where needed. Some people use Hyperdecks for media playback but I prefer to use ProPresenter for all of our media playback. If you have cameras 50ft or closer to the ATEM then those can get away with HDMI

[@ericmelendez5719]

Currently trying to get signal from my Canon XA10 and Canon EOS Rebel T6 but much Studio HD won’t pick up the signal. What am I doing wrong?

[@CBCowasso]

Eric Melendez make sure the atem is set to the frame rate your cameras are outputting. For example 1080 59.94i or 1080p 29.97 etc

[@yannick.gaming4830]

Hi I would like to know how to connect my Panasonic G7 to the Atem HD, because for me, I don't have any picture displayed despite having tried all the settings. Is there any particular method???? Thank you.

[@CBCowasso]

It all depends what framerate you have your ATEM set to.

[@yannick.gaming4830]

@@CBCowasso ok ok thank you . I'm going to try this.

[@davezorn]

quick question - how are you getting your audio mixdown ?

[@CBCowasso]

dave zorn we’ve got a video. Just search our channel for broadcast mix.

[@LucianMihaiPurici]

I love your video...! How satisfied are you for Marshall cv-502 ...?

[@CBCowasso]

Lucian-Mihai Purici thanks! They are great little cameras. Perfect for a set it and forget it type situation. We never even unplug them.

[@tristancarnes2757]

You posted this video a while back so have you since upgraded the video wireless transmitters?

[@CBCowasso]

yes. We also upgraded the antennas which helped. Just search youtube for nyrius antenna upgrade

[@tristancarnes2757]

@@CBCowasso and also have y'all got a jib?

[@CBCowasso]

tristan carnes no we use a cable cam now but no jib or anything when this video was posted.

[@frankrmeyer]

CBC Owasso what cable cam?

[@tristancarnes2757]

Frank Meyer he mentions it in the video, it’s this. www.bhphotovideo.com/c/product/1452771-REG/wiral_lite_cable_camera_for_any.html/?ap=y&gclid=EAIaIQobChMIjMaK9Ybw6AIVGI3ICh0nHQzpEAQYASABEgKGkfD_BwE&lsft=BI%3A514&smp=y

[@TheJordonKing]

Hey! Thanks for the awesome video walk through. I'm trying to get our church set up on a pretty tight budget so this is helping tremendously! Could I ask about your camera #2 setup (tight shot) on the Bescor? What lens and body are your running there? Thanks for the help!

[@CBCowasso]

I've changed that one from time to time. At this time I was using a Canon FD prime lens with adapter. It's the 100mm 2.8. Thanks for watching and glad to help!

[@jacobcross9415]

I may have missed it, but how do you wirelessly connect the roaming camera to the blackmagic system? Do you end up with any noticeable lag? Thanks!

[@CBCowasso]

Hey Jacob, our worship pastor has a channel here on youtube where he breaks down stuff like that. Here is a video where he talks about it. kzbin.info/www/bejne/bHK8inVpicZ8lbc

[@adrums_897]

Thanks so much for sharing this! It's been incredibly helpful. I'm just curious, what are you guys using as your capture card?

[@CBCowasso]

Hyperdeck mini with SD cards.

[@SabrinaJ1063]

Great info. I just counted 7 cameras!

[@abelchombaj]

Can show us how you do your audio?

[@CBCowasso]

Yep :) kzbin.info/www/bejne/jn-kq3xrh9mDmZo

[@cjm3997]

I’ve watched some of your services. How do you implement your countdown and intro videos at the beginning. We have ATEM tv studio switcher

[@CBCowasso]

We run our iMac ProPresenter feeds into our ATEM through a Decimator so we can use it on the stream as well.

[@cjm3997]

CBC Owasso Do you know which one you use?? I never even heard of that. Will have to look into it bc we wanna send our ProPresenter announcements videos to our stream.

[@wavetonesinc.3744]

What FPS do you record onto your HyperDeck? Thanks for taking the time to put this together.

[@CBCowasso]

Currently 29.97 at 10:80 P. But use whatever frame rate works well in your environment. We switched from interlace video at 59.94 to progressive so our stream was not interlaced

[@MrFolder40]

Hey Ryland, would you still recommend the GH4? We are starting our set up and I'm stuck between the GH4 or 5. We have about a $3500 budget for everything. We are planning on getting an atem mini pro aswell.

[@CBCowasso]

MrFolder40 yep, we love our Gh4 cams. I’d get a cage for them with a hdmi clip to hold it in place. Spend the money on good lenses. And the mini pro will be awesome, just not in stock anywhere yet.

[@MrFolder40]

Thanks alot!