CCNA Course | CCNA Routing and Switching | CCNA 200-301 [English]

[@ThanviNethra]

I'm a 13 year old and started watching this (half way thru)... I'm learning many new stuff.... I appreciate this video

[@shamstabrez2986]

ab tak jahan tk maine ye dkha h is video ko mjhe bht kuch sikhne ko mila h is video se nayi nayi chizen n m hoping in shaa ALLAH aage b bht kuch sikhne ko milega i belive

[@pratikpatel4575]

Subnetting becomes easy after learning from you. The easiest trick i've learned. Thank you.

[@ninal.87]

Your enthusiasm for teaching and your ability to make learning engaging is truly inspiring. You've ignited a love for learning in me that I didn't know I had.

[@samuelgunduza6653]

😃😃😃You made subnetting soo easy for over 3 yrs I have been scratching my head with his topic

[@MUTHUVEERAKUMAR]

Sir, Thank you so much for this wonderful training video, you have very deep knowledge in networking, really apprecite.

[@ShamshadAlam-zp2xu]

1:30:27 Yes I am enjoying a lot.😀😀😀

[@riteshsonawane1372]

1:30:30 🤯 Thank you so much ❤

[@jonathandavinji]

This video is one of the best i have ever come across, thank you sir Sharma for boosting my confidence in my networking career. May i know how to get more of your videos kindly.

[@nwkings]

Thanks Brother. You can see Our Live Courses on - www.nwkings.com/

[@surajshrestha596]

You have the best teaching style and knowledge Atul Sir. I have been following your most of the videos. Love from Nepal. Thank you

[@nwkings]

Thanks and welcome

[@nagendraprasad895]

Thanks for educating🙏🙏

[@ujjawalkumar9327]

Great gesture , you uploaded it here for free of cost. Thank you ♥

[@mayurarora6795]

I m at 6.11.29 and learned a lot so far. Long way to go. Thanks once again. 🙏

[@ManojKumar-lz9kz]

Sir your well teacher and really I understanding easily through your Explaination through your experience and really eager to see you sir

[@MuhamedSaheerKalathingal]

You are really king bro..Superb

[@saketbarnawal2167]

Thank you so much for this content. It really helped me to understand subnet mask and subnetting.

[@yogeshdindi]

I just started watching this video, and I hope I will get all the knowledge about networking.

[@nwkings]

*Good to know that*

[@esccobarcartal1934]

Sir Don''t know how to thank you, Im from pakistan and sir I have never seen any best teacher either in university or on youtube, not even paid coursers compete you! you got some serious teaching skills sir!

[@nwkings]

Thanks :)

[@tusharverma5515]

We call him network king. King for a reason ❤️

[@ashokkumaryadav2647]

Sir you have a weired view of teaching, that's incredible

[@gurudevtechnovision8611]

Great teaching and patience...cool hope more and more lean from you...keep it up...nice works

[@nwkings]

Thanks, will do!

[@takshpatel8109]

Superb Amazing extremely helpful video cource

[@kavyajohnson225]

The video is really helpful. I learned a lot so far. the way you explain is great with several examples. now I am in 5:22:30, I have a doubt in this section.

[@nwkings]

Thanks ask whats your doubt ?

[@haritharatnal3062]

Wonderful videos on networking. I will definitely join in the month of January 2022.

[@mayurarora6795]

You have an awesome teaching style. GREAT!!

[@nwkings]

I appreciate that!

[@SJ_Vlog_40]

Thank You sir 😊

[@NishantSsm]

Watched this course in one go at 2X speed. I found it very informative. Lots of my doubts got cleared and real time LAB is best.

[@nwkings]

Watch Part 2 - kzbin.info/www/bejne/f6LLY2asi9OqldE

[@shivanshmishra4669]

between 00:13:00 to 00:13:10 you are saying vpn is a public wan but vpn is a private network. I am confused could you please resolve it?

[@maazsheikh3683]

Excellent Lecture! Thank you! I learned a lot!

[@nwkings]

Glad it was helpful!

[@creater-anvitanil]

Easy to understand, super , thank you sir

[@nwkings]

You're most welcome

[@nagendraprasad895]

Really great sir...

[@ShahidQureshi-ee6wz]

so far 2.50 hrs passed, i just loved it .

[@sk-cx3pd]

brilliant 👍

[@kirangoud2061]

thanks brother.. 😊

[@nwkings]

Welcome 😊

[@loki5059]

Thank you so much sir

[@nwkings]

Most welcome

[@sarbottampc6822]

Very nice explanation...thank you sir

[@leebaljith4553]

Hi there,i am a web developer,I really tried sometimes to learn the networking.now I feel like I know the basics fundamentals about networking,you really taught easier way and alternative approaches for getting easy understanding.Thank you for your good work .

[@nwkings]

Thanks lee

[@rakeshbali5252]

You are Great 👍

[@nwkings]

Thank you so much 😀

[@pritikaramesh8420]

Hello sir, first of all I want o say that you've explained everything so clearly. Thank you for that. You've made subletting extremely easy. I've seen so many videos and always found it hard to understand. Now its become very easy for me to solve subnetting questions. Please may I know if watching this video will cover all the topics needed for the ccna certification.

[@nwkings]

We have added the most important topics. If you want all topics you can attend Live Network Engineer batch. Starting 16th July 2022. www.nwkings.com/contact-us

[@rahulmote7396]

thank u for helping subneting uderstanding

[@absarahmad6501]

Hello Atul, i am learning CCNa from this video, but i need notes which was shared by you on this video

[@bibek7440]

Amazing 👏 video. I was never this much excited to learn..

[@bart_allen]

thank you sir 🤎

[@sumitkumaradhikary8926]

really helpful

[@nwkings]

Glad to hear that

[@dondups1543]

Subnetting us like learning d fret board of a guitar, if gt d fist time well, it will stick fever, if not we'll den practice and cont practice is needed

[@dondups1543]

And I'm not good at both,hv learned different techniques from Atol😊tx for yr vids

[@kunaltiwari3545]

Good knowledge

[@shaikrufiya6404]

Thankyou so much...And also upload some interview live questions on some important topics sir .. It will help us to crack interviews

[@Andhracults]

Sir, What is the use of class when we are able to use class B range with class C subnetting or vice versa? Any specific reason for classifying the IP address ranges with classes.

[@debroy9088]

First part completed. It is pretty awesome. Waiting for second part

[@nwkings]

Already Uploaded !!

[@debroy9088]

Yeah I got that also. Thanks a lot. It helps me a lot❤

[@hariprasadsagireddy625]

Nice explanation sir. Can you please share the PPT of subnetting.

[@sivasubramani933]

How can use virtual lab?

[@amansahu8090]

Class E is reserved for R&D purposes those are not wasted i may not have idea but as per google this is the result

[@freeelectronics7635]

Sir koie device ka alag alag router se same ip address ho sakta he kiya???

[@nitinghatage261]

is any opening in network engineer

[@darjichirag235]

Network is collection of network devices and connected each other and also sharing information each other..

[@harshsamriya599]

I have a doubt sir, you told that Modem is used to convert Analog signals to Digital signals. But how that digital signal is travelling from Router to our device.

[@Knayamchoudhary]

what is brodcast in ipconfig

[@aadityasingh4225]

Hello, sir my name is Aaditya actually I am stuck in network sharing folder I am not able to share folder with specific 3-4 system in same room but if I open with other system sharing folder they Will be accessible with the help of this, but in the same room they are not able to share folders with each other, firewalls of all systems are also disabled, have also checked policies, still on the screen after a while An error will pop up which is 0×80070035 The network path was not found. I have also done all kinds of troubleshoot checks, after all I failed every troubleshooting, In my project this is the Toll Plaza network so we have for security physical firewall configured, switches, Etcetera. Please sir help me for this sharing folder issue, I'll be wait for your reply.

[@yodhamanasop7170]

Brother you have 2 CCNA course which one will help me from basics for Netgear network engineer

[@dondups1543]

Wat happens t d static route wen a third network is added?😮

[@nwkings]

Share timing

[@Ivan333100]

Hi, very nice course, it helped me a lot, but I have one question, the last demo with Linux and Windows, why do you assign /24 subnet (08:39:00) and not /25, and how is it still working? Thank you

[@dipakshelke5517]

Nice

[@darjichirag235]

Sir, vpn is private network to connected with branch help of isp..show how is public, I think it is private wan.

[@vaibhav1854]

Thanks for this marvelous piece of information, iska second part kb aega sir 🙏

[@dondups1543]

Hello IV done a+, n+, s+ and now busy with CYSA+, bt still feel u need to do something else before and am going thru dis video and not sure if ccna is the rite level for me, should I go to ccne😮,thanks

[@nwkings]

You can learn CEH, Pentest+ also !! CCNA is not required

[@AliRaza-yp7gs]

can we say that wireless link are public wan while fiber link are private wan?

[@leebaljith4553]

Where can we find the notes you mentioned?

[@ankityadav-xr5of]

You are awesome

[@legendsnitr9502]

hi, can we get the handwritten notes for this course , or study material

[@saugatttt4866]

how did you make that pc1 pc2. and how can we practice that?

[@sachingv1126]

Could any one plz tel me how can check virtual port speed

[@ankithanu007]

Hello sir, can you pls tell the name of tool u use for writing??? Thank you

[@marulasiddanagoudakn5201]

Excellent sir. Sir I completed engineering in the year 2014, after that till now am in teaching field. Now I want to do this CCNA course. Any suggestions plz

[@nwkings]

Contact Us learn.nwkings.com

[@adarshjaiswal9323]

Can I get access to the presentation (notes) for revision please! ?

[@johndaniel9680]

I'm in training day 1

[@rikitachakraborty9146]

👍👍

[@architkumar1265]

databases for top level domains are managed by IANA or ICANN ? and If it is managed by IANA then what does ICANN do ?

[@nwkings]

IANA is a part of ICANN.

[@skazharuddin4001]

Sir can I add logo of ccna in my cv .I m not a globaly certified ?? One interviewer told me that you can not add ccna logo in your cv until you are not globally certified..so tell me sir

[@ramidulahmed3609]

Sir, one important question. In subnetting after creating 4 equal parts of a network, can a part communicate other parts without using router?

[@rameshnodagala2005]

Could you please anyone send a link CCNA 17 hrs playlist in English

[@a.m3180]

Amezing teaching....i recently watch your video ...i enjoyed a lot ....& i am getting interest to learn more & more....i want to join your class .... please tell me what is process ?

[@nwkings]

Visit learn.nwkings.com

[@jidealade6328]

how do i have access to lad ?

[@Mfitness9]

i am learning subnetting easy way..

[@chandrakants5580]

sir please share your network fundamentals pdf here as well

[@gelagayberie3876]

which app do you use for this online training to write or draw?

[@swapnilankushe5670]

Do we have next part of this video ?

[@y.s.prakashmane677]

Yes sir

[@ashoorkhan5500]

Please let me know which is next part after this plz

[@nwkings]

Next part available in our KZbin Membership !!

[@aradhya8006]

hey hi king, i m punith v, i had completed my B com commerce background 2021 batch and,now i am interest to learn networking carrier but let me now i think this not difficult for commerce student, its difficult or easy, i hop this comment find you well im waiting for your response

[@rohitdasbaijal]

does ping uses any port number ??

[@thedeviloctopus5687]

No ads,,,,, so what is your benifit for your hard work and valuable 9hvrs

[@nwkings]

More People

[@thedeviloctopus5687]

@@nwkings ❤

[@learningfast2810]

Hello sir, I completed my B.tech since 2014. Now I am a teacher since 2014. But now I want to switch my job. Please help me

[@gunabatinaka1324]

Yes

[@twentyeightO1]

*4:20:00

[@shivani6400]

When will the other parts be uploaded?

[@nwkings]

Near Diwali part 2 will be uploaded. Complete this part !! For Live Training with Lab Access you can join batch starting soon. learn.nwkings.com/

[@hdushyanthgowda7679]

sir in 2024-2025 CCNA course cirtificate value is higher or no, please tell me sir

[@nwkings]

CCNA is not new its been running from past 20+ years. Already millions of people are CCNA Certified. So CCNA will remain in Future to learn Networking.

[@someone_048]

Private means Intranet.

[@Brotherhood_2_2]

How can I access your lab sir?

[@ziajalali3906]

how can i buy your course ?

[@nwkings]

Whatsapp Team - wa.me/918130537300

[@AbdullahAlMamun-rz5mk]

I am understanding all the terms so far. However the only question i have is what is the purpose of subnetting?

[@MANVENDRASINGH-kv1su]

By subnetting computer understands which one is network bit and host bit

[@dhairyaarora8464]

First to reduce the wastage of ip addresses as there are limited in number . Secondly it helps in minimizing the traffic as the network itself is divided into various sub networks . Consider it as if multiple lanes are leading to a destination instead of a single road

[@martintouko8359]

If you have carefully watched all the subnetting part, you'll understand the purpose of it. Pretty much dividing network into small parts to accommodate or fit the number of computer in an organization as to avoid wastage of ip addresses