COST: $120-130 MATERIALS: (2) 2x4s (1) plywood (1) 4” pvc pipe (1) timber post (1) copper tube (1) carpet (1) fishing line (1) darning needle (1) eye bolt / wearable harness / chain or leash / TREATS! Hardware: nails, screws TOOLS: Saw, Measuring Tape, Drill, Driver, Hammer, Scissors Want to build your own carpet mill? You can do it!
@marialenz72002 жыл бұрын
This is the most honest straight forward video. Thank you!!
@CedarLiving2 жыл бұрын
My pleasure! Thank you for watching, and I hope it helped you!
@wash0ut2 жыл бұрын
I know it's a bit late but I think I see why it's not working right. The harness support is too high for your dog. We have to remember Newton's third law of motion. The action force extruded by the dog is causing a reaction force of roughly 80% up and 20% back (not actual calculations, just my best guess). Lowering the bar by a foot or so should help flip those numbers. I'm guessing your setup works just fine otherwise! :) Hope that helps! By the way, that is one adorable puppy!
@finthefishsep20toma2 жыл бұрын
That's a great point! Hadn't considered it
@guyhorowitz1588 ай бұрын
What a cool young lady you are!
@ashenwalls355811 ай бұрын
Oh man, I have a pup who would go nuts for this!
@tanarir2 жыл бұрын
Totally really helpful great 👍 job and thanks for your video with the complete instructions 😊 we all need to see videos like this full esplanade on DIY thanks 🙏
@patriciavelazquez10102 ай бұрын
Thank you for your video. I want to make myself a tread mill with no motor. However, it's to many parts, so I am going to try to make me a dog treadmill, which takes less material. I don't want it to run a marathon just for walking. I will build it with measurements that would be for a human. Thanks again for your video.
@lutherhaynes8422 Жыл бұрын
Very good video. I have most of the materials to make one and our Golden Doodle will love this, very high energy!
@rodiona87812 жыл бұрын
Good work! I'm about to build one. What I think the issue with yours was the carpet was dragging on the floor, the rollers weren't centered and I think Obie needs sides so that he can only move forward but if he's tied off it'll only move the carpet and he won't be able to jump off. Hope to see an update how Obie likes it now.
@voodoochild6741 Жыл бұрын
Great Job. Thanks for sharing
@RickSanchezC19802 жыл бұрын
I’ve actually build a carpet mill and the right type of carpet to use is stairs carpet or runner carpet the type they sell at Home Depot and then add caulking on the entire carpet so it last longer .
@rosemaryball7560 Жыл бұрын
How do you add the caulking?
@RickSanchezC1980 Жыл бұрын
@@rosemaryball7560 you use a caulking gun and spread it on the carpet with a piece of wood and press it into the carpet then let it dry for 24 hours. After a while it falls off but it makes the carpet last longer.
@ItsaJuraff Жыл бұрын
Thanks for showing the whole process! It helps a lot with thinking about how exactly I want mine to go together. Nice SMN plug @ 14:00 haha
@1Savagevideos Жыл бұрын
7:29 what's holding that roller in place the copper only goes through the posts
@1Savagevideos Жыл бұрын
6:44 where the copper goes through the posts for the rollers, what holds the rollers to the posts
@rikityrik Жыл бұрын
I hope he got the hang of it. If not I hope you at least enjoyed the project, looked fun. Your voice reminds me of the woman that narrates Max and Ruby. Lol 👍
@paulgreen4208 Жыл бұрын
LOLOLOLOLOL Are you serious you measured all the way around that pipe with a tape measure. Thats hilarious I Love It.
@deanlarkins585810 ай бұрын
They make an iron on carpet seam tape that you put on underneath. What do the job you were trying to accomplish perfectly.
@alexi.3414 Жыл бұрын
OMG. Benny looks like a liter mate to my Penny.
@ingsgdm Жыл бұрын
excelent!! is a good example for my project.. thank you.
@nataliakrzak29652 жыл бұрын
I think I'll add some texture on the carpet, like some stipes so carpet won't be so slippery. Good job!
@jonathondeacon17757 ай бұрын
Hi, would you happen to have a blueprint for making this?
@samuelbrown34052 жыл бұрын
13:50 I see you too are a fan of Cody's Showdy. Nice.
@1Savagevideos Жыл бұрын
7:38 so u just hammer the copper posts into the wood inside the roller right
@lupitaaloovee2 жыл бұрын
Was he able to use it ? How did it go?
@1Savagevideos Жыл бұрын
What do you hold the rollers in place with I don't understand that.
@1Savagevideos Жыл бұрын
6:18? Do I put holes in the wood inside the PVC?to hold the rollers I don't understand that
@PirateAndArmadaCo4 ай бұрын
Just through the frame 2x4 and a long nail that's into the pvc center wood
@taffykins27452 жыл бұрын
Great video! Do the pvc pipes spin too? What are the copper pipes for; I could not see. Thx!
@tanarir2 жыл бұрын
👋Same question here ? Hope she replies have ah nice day
@CedarLiving2 жыл бұрын
Hey there, the pvc pipes do rotate with the carpet. The nails rotate inside the copper tubing.
@taffykins27452 жыл бұрын
@@CedarLiving Thank you!
@ehmslm Жыл бұрын
I think you did a great job. Did the dog ever learn to like it?
@chiquitaf167 ай бұрын
I’m conflicted on either trying to build this or just spend the $500 to buy one. Either way my dogs energy never wears out and yes my yard looks like that. As do my floors 🥲
@mclau15242 жыл бұрын
my dog is just very reactive to other dogs and people so I really cant take him outside, I want to make one of these so he can still get exercise indoors where hes not barking at people or other dogs
@laurentdufour7019 Жыл бұрын
What did you put in the copper tube ?!
@lindal5843 Жыл бұрын
Truly amazin!!!!
@1Savagevideos Жыл бұрын
6:52 I need more explanation on this and how the rollers hold
@tinyali77042 жыл бұрын
Very kewl!
@Albatr0ss222 Жыл бұрын
Original build idea by Molan Labe 12 years ago.
@JessiePageGajewski2 жыл бұрын
Great job! Keep the treats low when introducing new dogs 😉
@Chris.Rhodes2 жыл бұрын
It sounds like there's just way too much friction on the "whiteboard." I'm going to be making one of these to save me $900 with a Dog Trotter, but I'm going to use wood, and then put pvc pool liner on top, hopefully make the deck have less friction and kind of "skate" across it.
@abbyb4852 жыл бұрын
Did that work?
@Chris.Rhodes2 жыл бұрын
@@abbyb485 it did. It worked excellent! But then I sold the whole rig, I'm going to make another one.
@abbyb4852 жыл бұрын
@@Chris.Rhodes awesome thank you so much! I think I'm going to do the same then
@Chris.Rhodes2 жыл бұрын
@@abbyb485 I used PVC pool liner, I got it from some scraps at a local pool installation business. Not sure where you can get it, maybe at Lowes? Or something like that. It comes in a roll.
@thiirtyseventeen2 жыл бұрын
@@Chris.Rhodes could you give a tutorial
@Dildonahue2 жыл бұрын
As I watch this video, my dog who just spent 2 hours at the beach is begging me to play
@deanlarkins585810 ай бұрын
The landscape timbers are a lot of extra weight and are out of balance. Why not just use schedule 40 PVC caps??????
@johnwilliams89185 ай бұрын
And a long rod through the center, and bronze bushings instead of copper, which will wear out in no time
@sebastianandreslopezespino30322 жыл бұрын
Todavía no entiendo cómo lo haces girar 😭
@drewhenrique Жыл бұрын
Amei ❤😂
@lilij89882 жыл бұрын
Silicone lubricant spray would make the carpet slide better without making things greasy
@redkeepersylar Жыл бұрын
I'm gonna try this with some strong glue instead of stitching the carpet.
@tylerwalker1452 жыл бұрын
Would this work for small dogs
@CedarLiving2 жыл бұрын
Great question. Absolutely! You just scale down your build. Start by measuring the length of your pup, then go from there. Maybe add some oil between your board and carpet to allow for easier sliding with less force. Good luck!
@johnreeves6854 Жыл бұрын
Just buy a used tread meal and slightly mid it i did and my dog lives it
@davidcombs73853 ай бұрын
Does the mat for the tread mill tear up their feet? I have two 70lbs American bullies that need this
@kravenmoorehead792710 ай бұрын
Turn the carpet over.
@hunter53697 ай бұрын
In my city if you get caught with one of this you guilty of training digs for fighting
@jojo4rmdabronx2 жыл бұрын
The tension of the carpet should alone hold the dogs weight up, not the board between the rollers. The dog should not easily be able to stand on the mill without it rolling
@eusoucarlosgustavo Жыл бұрын
😂😂😂😂😂😂
@chamelleandtokito3 ай бұрын
I need to give you probz on that the best DYS dog - treadmill video on KZbin is made by a woman 👩🏻 😅🎉 probz
@glumGlumm2 жыл бұрын
Disaster
@mastersquinch Жыл бұрын
some more news in the background lol, hell yeah
@lalalala3968 Жыл бұрын
when you got too much time on your hands but too lazy to walk your dog.
@jessicaashley6077 Жыл бұрын
There are some dogs (high drive working breeds) you just can't walk or run enough and some places that the weather won't let you. My GSD and Mal never stop, even with backpacks.
@Ma_X64 Жыл бұрын
A great way to spend a hundred bucks and a lot of time on a piece of very, very useful nothing-crap. You'd better start with the study of physics and technology. And may be you will know about something like bearings and friction and materials robustness.
@lalalala39682 жыл бұрын
sometime people shouldnt make stuffs.
@redkeepersylar Жыл бұрын
sometime people should stfu
@lutherhaynes8422 Жыл бұрын
Without imaginative thinking, basic engineering, understanding the three basic physic machines, we would be living in an open area, no homes, no fire, no food and no ability to learn, adapt or overcome anything. Praise those that do something and share about it through their experiences because it gives you the ability to complain about it. What have to go to bring to the table other than an emotional response driven comment?
@lalalala3968 Жыл бұрын
@@redkeepersylar so why are you talking ?
@WiseSageBum10 ай бұрын
Ho w do you prevent static electricity from building up?