Ceiling Fan Downrod Extension Installation | Minke Aire Roto Coal Black

  Рет қаралды 45,805

Borsellino Home Services

Borsellino Home Services

Күн бұрын

Пікірлер: 24
@BorsellinoHomeServices
@BorsellinoHomeServices 4 жыл бұрын
😎If you like this video please SUBSCRIBE! and check out my other similar videos!👍 kzbin.info
@Jaeger60
@Jaeger60 7 ай бұрын
Thanks for the video. Short and to the point without 15 minutes of rambling, just what I was looking for. Gonna try this out tomorrow and save the labor costs of getting someone else.
@Razor_36
@Razor_36 Жыл бұрын
Bought a new fan and a 24" downrod which has one end threaded. The fan I bought does not have female threads in the top of the fan so after inserting the pin I tightened the set screws against the male threads of the rod which was kinda fun. Can't find any inserts or anything and now I need to balance the thing. Not real bad but it's enough to aggravate me lol. Nice video!
@C-Mah
@C-Mah 6 ай бұрын
Perfect, thanks. I wanted to know if I could shorten the standard down-rod. Seeing you unscrew the knuckle gives me hope.
@walterjoncas12
@walterjoncas12 4 жыл бұрын
Ceiling fans can help even out temperature difference from room to room. Also adds to comfort levels. I like the knuckle for holding the fan to mount at ceiling. Much easier installation. Thanks!
@BorsellinoHomeServices
@BorsellinoHomeServices 4 жыл бұрын
yeah, I've got that fan running right now to try to push the warm air down. The knuckle is very handy!
@billydietrich4833
@billydietrich4833 3 жыл бұрын
Thanks for the video. This was just what I needed. !! You helped more than the store or manufacturer :)
@BorsellinoHomeServices
@BorsellinoHomeServices 3 жыл бұрын
AWESOME!!!!! Happy to help!!!
@TheMajdi86
@TheMajdi86 7 ай бұрын
if too short, it that effect wind circulation?
@davidhalley9795
@davidhalley9795 3 жыл бұрын
This was a great video. I just purchased the same ceiling fan with the downrod. My issue is the canopy. Of course it's the last thing I needed to do. Unless there's a better solution I'm going to need longer canopy screws. The bracket does not fit outside the box hole onto the ceiling, rather inside the hole. I hate it when you need to match a certain thread. They rarely fit. Wish me luck.
@BorsellinoHomeServices
@BorsellinoHomeServices 3 жыл бұрын
oh snap! longer screws? Can you get a box extender or is it the actual fan parts that need to be longer?? The machine screws used for electrical can be pretty standard. I should do a video explaining how I check. Hold the screws flipped backwards from each other and touch the threads together. If they interlock, they are the same thread size. If they don't, it's off. Of course you need to know the diameter too! My local hardware store has a display with nuts attached and you literally screw the screw into it and it shows what size it is and coarse or fine thread! good luck!!!
@davidhalley9795
@davidhalley9795 3 жыл бұрын
@@BorsellinoHomeServices I was able to use two longer screws that came with the fan. The heads were slightly larger than needed but I was able to get them into the canopy ring. I'm a happy camper.
@jsprz5928
@jsprz5928 Жыл бұрын
I just installed a 12 inch downrod and now my fan wobbles slightly at high speed, did I do something wrong? My fan doesn’t have threads for tightening only the downrod
@BorsellinoHomeServices
@BorsellinoHomeServices Жыл бұрын
hmmm. im not sure. I had an old fan that came with weights to help even out inconsistencies but i've never had a wobbling problem with mine
@mahe3105
@mahe3105 3 жыл бұрын
My slab height is 12ft and fall ceiling is 18inch i need to keep more 1ft under the fall ceiling. My question is whether my fan will function steadily with 2.5ft rod or it will wobble as there is no support inbetween to the down rod??
@BorsellinoHomeServices
@BorsellinoHomeServices 3 жыл бұрын
i'm actually very happy with how the fan operates. The one with the downrod is probably the most stable fan in my house!!! Better than the flushmount one in my office!!!!!!!
@garcia21x
@garcia21x 2 жыл бұрын
Great video, help a lot! Thanks!
@BorsellinoHomeServices
@BorsellinoHomeServices 2 жыл бұрын
You're welcome!
@luke9822
@luke9822 3 жыл бұрын
I have no idea how all of your fittings came off so easily, unless you had already done it and this was a second version for demonstration purposes. My downrod is so tightly in there that I can't figure out how to unthread it.
@BorsellinoHomeServices
@BorsellinoHomeServices 3 жыл бұрын
Nope this was my first attempt
@luke9822
@luke9822 3 жыл бұрын
@@BorsellinoHomeServices I was able to remove mine. It seems it was siliconed in place with the electrical wires that were being threaded through at the base. After I broke that seal, it turned freely.
@jackwood8307
@jackwood8307 2 жыл бұрын
👍
@BorsellinoHomeServices
@BorsellinoHomeServices 2 жыл бұрын
👍
Adding a longer rod to a ceiling fan. Lowering your fan
7:45
Lightahome UK
Рет қаралды 109 М.
小丑女COCO的审判。#天使 #小丑 #超人不会飞
00:53
超人不会飞
Рет қаралды 16 МЛН
Support each other🤝
00:31
ISSEI / いっせい
Рет қаралды 81 МЛН
Мен атып көрмегенмін ! | Qalam | 5 серия
25:41
Cat mode and a glass of water #family #humor #fun
00:22
Kotiki_Z
Рет қаралды 42 МЛН
Minka Aire Artemis Ceiling Fan Installation
3:42
Del Mar Fans & Lighting
Рет қаралды 150 М.
Turn Your Remote Controlled Ceiling Fan Smart With BOND
7:39
Tech With Brett
Рет қаралды 93 М.
Best Hardware to Hang a Ceiling Fan
12:29
DirtFarmerJay
Рет қаралды 80 М.
How To Take Down A Ceiling Fan - Hampton Bay
4:51
Borsellino Home Services
Рет қаралды 195 М.
How To Retrofit a Ceiling Fan Extension Rod
3:28
Peterson Electric
Рет қаралды 24 М.
Ceiling Fan Downrod Length Makes a Huge Difference
1:46
sengsationa1
Рет қаралды 25 М.
Removing a ceiling fan
4:37
Mark Jauregui
Рет қаралды 97 М.
小丑女COCO的审判。#天使 #小丑 #超人不会飞
00:53
超人不会飞
Рет қаралды 16 МЛН