@cemaxecuter I finally got Dragon installed. I would like to start off with one of your projects that would be a beginner level. I also had an idea: I was wanting to make a multiboot pc with a few OS. 1. AntiX (Personal), Dragon, Kali or Parrot and CSI Linux. I want it to be able to share a home folder so when I go from one OS to the next. Do you think that this would be better to just run in VirtualBox(Dragon host OS)? I like the AntiX because it has fail2ban, and it has a great way to set up multiboot pc. P.S. I am having a huge program getting AntiX up and running right. This seems like a good set up to preparing for Active Duty Air Force.! I ONLY HAVE A YAGI ATTENNA AND A SDR add-on. Are you on the IRC Channels ?
@cemaxecuter77832 ай бұрын
I have a discord I try to pop in now and then. Hmm, I’m not for sure how to setup the home folder for access across the board and you may not want to do that between OS as the home ends up with hidden .config for applications that are probably not going to be the same across OS. Just an initial thought. You could probably create a shared folder and put stuff in it, but I’d avoid home. I do think that a DragonOS Host with sat virtual box from the actual site (not from apt install) would be a really good way to go. Make sure you install guess tools on host and that your users is added to the vbox user group and log out and back in.
@cemaxecuter77832 ай бұрын
Sorry for the mass paragraph, I wanted to respond as I swear replies get lost on KZbin and I don’t get notified.
@hangzhang-s4l Жыл бұрын
I would like to ask how the motherboard of the X310 makes the two channels synchronized? Is it possible to use a TwinRX daughter board to do this? How to specify RF parameters in LTESniffer -a? Thanks
@cemaxecuter7783 Жыл бұрын
Outside of gnuradio itself/maybe some command line tools, I’ve not seen any open source application use both channels of the twin rx at the same time. For lte sniffer the dev only said x310 with two separate daughter boards or optionally there’s a way to take two b210s and a separate branch and make them work together. For the x310, I have two separate daughter boards and for how they work together - I assume that’s uhd and design for how they work together but I don’t know specifics.
@hangzhang-s4l Жыл бұрын
I now have an X310 and two daughter boards, but my two channels cannot work at the same time. Do you not need additional configuration when starting the X310? In addition, I see that when you start X310, two network cards are connected. Do you need two network cards to be connected during the actual parsing process?@@cemaxecuter7783
@cemaxecuter7783 Жыл бұрын
Sorry I didn’t see this till now. Are the daughter boards twinrx? If so those types did not work.
@cemaxecuter7783 Жыл бұрын
The two network connections I don’t believe are needed.
@BB-ko3fh Жыл бұрын
hi there, i am new into the field and wanted to ask what sdr should i get. I was trying to get a limesdr but i am out of luck. would really appreciate your advice on how to get started
@cemaxecuter7783 Жыл бұрын
That’s tough, are you wanting or needing full duplex? Perhaps you can get a AntSDR e200.
@BB-ko3fh Жыл бұрын
@@cemaxecuter7783 full duplex would be better (if i am going to buy anything) but would the AntSDR e200 enable me to implement all your tutorials for example. If it doesn't which one would you recommend. That's both affordable in a sense and is on the market. Given some SDRs can get very expensive given demand-supply , not looking to buy multiple (i just want have one good one like i have one good phone). I hope this makes the question a lil easier lol ... i hope :) Awesome Video btw !! forgot to say
@cemaxecuter7783 Жыл бұрын
@BB-ko3fh the flexibility of the ante200 would allow you to run a lot of the tutorials using uhd and also you could optionally change out the firmware for a PlutoSDR like setup and test those tutorials as well. It seems like a win win.
@haraldwolte3745 Жыл бұрын
@@cemaxecuter7783does limeSDR work also?
@TG-ok4ty3 ай бұрын
What role does MatLab play?
@cemaxecuter77833 ай бұрын
In this video or in general? I don’t recall doing anything with it in here.
@Melhisedek618 Жыл бұрын
Is it possible to do a pentest using a Bluetooth adapter, without using expensive HsckRF or BladeRF? what applications are suitable for this?
@cemaxecuter7783 Жыл бұрын
Mirage has modules for a standard Bluetooth adapter, like one inside a laptop.
@user-wy1wb9bq7f Жыл бұрын
thanks for this great video amego
@user-wy1wb9bq7f Жыл бұрын
+ can u do more bluetooth hacking (:
@omergunal85073 ай бұрын
is 10gb ethernet card necessary for x310 connection?
@cemaxecuter77833 ай бұрын
You can use a 1GB connection as well but it’s limited on sample rate - maybe it’d be fine for this but I’m not sure.
@JB-123 Жыл бұрын
Can you do this with the HackRF? Is there any special setup?
@cemaxecuter7783 Жыл бұрын
You could but you’d need to install one of these onto the hackrf. There’s a few vendors selling them. www.nooelec.com/store/tiny-tcxo.html You’d also use the hackrf conf file.
@JB-123 Жыл бұрын
@@cemaxecuter7783 thank you. Do you have a preferred device for this? Like the blade?
@cemaxecuter7783 Жыл бұрын
@JB-123 sorry I thought your question was in reference to my latest video. I just noticed it was on the lte sniffer one. Sorry, the hackrf won’t work for this case. The only way you’d get imsi info off lte is either with the x310 or possibly 2x b210s. Now the bladerf can sniff the downlink, but that doesn’t get much.
@JB-123 Жыл бұрын
@@cemaxecuter7783 Thank you, the feedback.
@RenoldSingh Жыл бұрын
Is it possible to dump the trace data to pcap?
@cemaxecuter7783 Жыл бұрын
It does automatically and if I had been thinking more clearly I would’ve shown that piece. Dang it! Yeah multiple pcaps are dumped in the directory you run it in, all labeled according to what they focus on.
@testguy3210 Жыл бұрын
Can this be done using Hackrf?
@cemaxecuter7783 Жыл бұрын
Unfortunately not, but there is some parts of Mirage you can use the Hackrf with.
@mrhamid2937 Жыл бұрын
Your git link is down bro
@cemaxecuter7783 Жыл бұрын
Thank you for the heads up!! Sure enough, it looked okay in the editor but when clicked it was a dead link. They should all be fixed now.