CF Moto Uforce 600 Horn and Turn Signal install

Рет қаралды 5,012

Күн бұрын

Пікірлер: 21

@TS-my9yq 15 күн бұрын

The easiest way to figure out what those labels on the wires say is to use a smart phone and something like Google translator. Take a picture it will explain what it is. I added separate amber led lights on the rear for turn signals, they’re pre-wired also under either side of the box tucked up.

@Bearsdenadventurues 6 ай бұрын

great video

@recnation8045 6 ай бұрын

Glad you enjoyed it

@jasonrussell8520 8 ай бұрын

Would anyone have information on installing the flasher on a 2023 Uforce 600? It's a different part number (5ASV-161000-7801) and appears to be in a different location. I found written instructions that say "Connection plug located under steering column, attached to firewall." But I'm not seeing it.

@recnation8045 7 ай бұрын

That is the correct part number according to cfmotousaparts.com/ I am not sure on the install. Open the hood and follow the wire harness out of the bottom of the fuse box and look for a loose plug. That is how I found this one no the 2022. They are good about zip tying unused plugs out of the way. My guess is you will see a place to screw it to the firewall above the brake master and the plug will be in that area too. Let me know if you find it.

@jasonrussell8520 7 ай бұрын

I found the plug. It’s inside the cab, below the steering wheel and above the brake pedal on the firewall. You have to remove about a dozen screws and two pop rivets, then pull back the bottom plastic tray/molding on the driver side. Wasn’t difficult, but it’s well hidden. You can’t see the plug until the plastic is pulled back.

@ghazim5340 4 ай бұрын

hey, do you have a good license plate bracket that will work with this kit as well I got the turning kit for this the one that you provided in the video now looking for a license plate kit with a light

@recnation8045 3 ай бұрын

I don't know of any "stock" license plate brackets with lights for the UForce 600. I didn't mount a light for my license plate. I used this kit from Feral Products. www.amazon.com/Aluminum-ATV-UTV-License-Plate-Kit/dp/B015YDPUW0?th=1 There are kits on Amazon that are lighted and there is a plug in on the back of the UForce that you would need to tap into to light up the license plate.

@jonvankuiken6932 8 ай бұрын

Great video! What year is your uforce 600? I have a 2022 600, parts are not listed for my year, I assume it is the same? Thanks -Jonnyrooster

@recnation8045 8 ай бұрын

Mine is a 2022 and the parts listed fit. If you notice in the video, the turn signal blinks faster when you hit the brake. The Curt adapter was listed when I searched LED compatible. I'm testing others now to see if there is a better fit and make an update video. Otherwise it was a pretty easy install.

@frankgiesing5316 4 ай бұрын

I did not see where you got the flasher wire for the cfmoto 600. And of I’m not doing wire kit can I still do the flasher. Thanks in advance

@recnation8045 3 ай бұрын

In the video, I pointed to the location of the flasher wire with a green arrow. It was shoved underneath another wire behind the battery cable junction box. You can still do the flasher kit with out splicing the wires but the rear brake lights won't flash. You will have to go the back of the vehicle under the box and unplug the reverse light plugs. Then you would plug in the jumper wires. That will make the reverse lights a turn signal or flasher.

@rdreamhomestead1451 8 ай бұрын

How is the machine holding up and have you adjusted the valves? Some say they don't touch them but the manual says they should be adjusted at 20 hours.

@recnation8045 7 ай бұрын

It is holding up really good. I have not adjusted my valves yet and it has just over 300 miles on it. The valves are not making noise and seem to be good for adjustment. I plan to do a quick maintenance on it for changing oil for the summer and a grease job.

@ghazim5340 3 ай бұрын

how do you do a 2024? How do you plug in the flasher module on a 2024 vehicle? I can’t find where you plug it in where it shows on your video it doesn’t match.??

@recnation8045 3 ай бұрын

Hello, the 2024 says the flasher wire comes out under the steering column. When I looked at a 2024 at the dealer, it was in the same place as my 2022 but shoved under the fuse box on the fire wall.

@tobryan316 3 ай бұрын

Will this be the same on a 2024 Uforce 1000XL?

@monikahildebrand8882 3 ай бұрын

😅Fantastisch Grüße aus Germany😊😊😊

@recnation8045 3 ай бұрын

The UForce 1000XL is a little different but there should be a plug under the hood near the brake master cylinder. Near the middle of the firewall, you should see a flat plastic prong sticking up to mount the flasher. The plug is zip tied down below that.