CFXplained: Installing Crystal focus 10 (CFX) lightsaber blade profiles tutorial

HUGE blade profile library: crystalfocus.net/
This video is meant for those that have little to none experience with the crystal focus 10 (CFX) lightsaber and it will demonstrate how to install the blade profiles and color profiles that are shown on crystalfocus.net

[@oldb-1kenobi]

The new intro is great, the music has a cool Blade Runner vibe! Thank you for this informative video, its very helpful.

[@iamskipper]

That's neat on the tutorial. By the way, how do you set the blade lockup flare to move as you swing the blade on this new cfx firmware? Much appreciated ! thanks.

[@CrystalFocus]

Thanks!. If you set 'mapping_lockup=2' and you have the latest firmware (6E) then the lockup will react to the angle of the blade

[@iamskipper]

@@CrystalFocus Thank you very much ! =) Hopefully one day you could walk us through these 6E new features and the config location as well in a video ! would be a great insights on CFX !! Thanks again man !

[@ryanreppertdrummer9013]

is there a video to add a new blade profile to a new font? i cant use CFX10 my mini usp broke off. i need a video start to finish new font and new blade profile

[@CrystalFocus]

I'll see if I can create a video on this

[@teamcowboys303]

What’s the blade color profile 4 the sith chant? Dying 2 get the blade effect

[@CrystalFocus]

could you be more specific? I want to help but I'm not sure what you're looking for

[@fatmonkey46]

will the blaster deflect change to the same on as the video on the website if I do this?

[@CrystalFocus]

It should yes

[@cooach6614]

If it’s just like a flicker or pulse blade profile do I need to copy the color profile parameters too or just the blade profile into my config?

[@CrystalFocus]

If you just want the flicker or pulse then only the blade profile should do

[@cooach6614]

I’m adding some blade styles and the newer ones seem to have like a gap in between the last 3 parameters of the blade style when copying that into my config do I leave that gap or delete the gap? There’s a little gap between mapping_move,mapping_audio and bladepower do I leave that gap?

[@CrystalFocus]

You can remove the gap. It doesn't effect the working but provides a better overview when scrolling through the config

[@cooach6614]

@@CrystalFocus ok thank you so much so if I leave the gap it still works but just so it looks better delete it some of the older blade styles has the pname at the bottom of the style should I leave that there too or move it to the top? Sorry last question haha

[@davidballance209]

I can't get my CFx to recognize my 'saber. All plugged in and on. Sound board link and status doesn't change anything. Ugh!

[@CrystalFocus]

Most likely because the cfx is in usb mode. Connect when it's not in usb mode

[@cooach6614]

im new to cfx from proffie how many blade profiles can you have at once? i see like 347 blade profiles on your website and just wondering thanks!

[@CrystalFocus]

you can have 32 color profiles and 32 blade profiles at once

[@jajajurgen]

handig zeg

[@coldelicious04]

Would it work with xenopixel?

[@CrystalFocus]

no. this is for CFX only

[@teamcowboys303]

@@CrystalFocus then your site is garbage i had no clue this was only for cfx how i freaking bought 2 blade effects from your site for my xenopixel smh

[@CrystalFocus]

@@teamcowboys303 well that is unfortunate and I can understand that. No need to call the site garbage though. Send me an email with your order and I will refund you the money. No worries!