CH341A mini bios progammer not working.why/how.

[@MCOLAK-qf1nh]

thanks bro

[@26TM205]

The driver software you pointed to is for parellel port driver. you need the SER serial version, which is what the USB interface is.

[@racejay]

On Windows 10 you don't need to install the driver manually; the system will detect it and install the appropriate driver...

[@rameshrajput3389]

thank downloding miniprogramer software many many thanks

[@mr.anonymous298]

Thanks for this informative video

[@angelotorri6908]

black my say driver preinstalled i don t know what appened with this

[@dishdoctor480]

Also make a video about Ch341a programmer, and how to use usb to TTL, brother!

[@Musheer_Qurashi_Yamaani]

thank you

[@arunpraathb2859]

Supper bro tis work

[@Knebebelmeyer]

dont make mistake to newer bios chips..this device use 5v to programm the chip! thats a problem! you can use it for old Chips but not for newer ones.. look in the datasheet of every chip u want to write.... it could be possible u need a 3.3v device or u have to modify this device!

[@frozen_mitko]

Mine is limited to 3.3v

[@Knebebelmeyer]

@@frozen_mitko then u have a new one! the older ones use 5v to programm and this was a problem

[@frozen_mitko]

@@Knebebelmeyer I didn't know about the old ones.

[@vextorfx6243]

@@frozen_mitko how did u know

[@frozen_mitko]

@@vextorfx6243 Measured it with a multimeter.

[@jackjones301]

Yes this worked .... good 👍 video! ...

[@racejay]

Check my voltage mod here » kzbin.infocommunity