Chain link swing gate hardware

Quick run through of some common chain link swing gate hardware.

[@Njao6q4vrv73]

Thanks

[@louishollandjr]

Wish was in Rochester ny I'd rather shop thier than Big Box Drillin holes in post can be challenging to line up straight.

[@joelight20]

Hey Justin, where do you purchase those j bolts from?

[@allamericanfenceerectors6594]

try this link: www.hooverfence.com/chain-link-j-bolt-male-hinge This is a large mail order company that has a ton of fence parts. We are not affiliated with them nor do we benefit from you purchasing from them but being that I don't offer any online orders this will be your best bet. Hope this helps!

[@debfassbinder9283]

WHAT PART IS NEEDED IF YOU HANG DRIVEWAY CHAINLINK to 8" PEELER CORE POSTING, PRESET ?

[@justinnoss5900]

If you are asking what type of post hinge mounts to a pillar or concrete column, you could use a “wall Mount flat back hinge”. This gives you the male hinge needed and a flat portion with 2 holes to mount sleeve or wedge anchors into the concrete surface. If you have a strong enough wood structure you could use the same flat back hinge and use wood lag bolts as well. If you need to fine tune the “in and out” gap you could use washers or shims to help the fitment for your latch. Hope this helps!

[@debfassbinder9283]

@@justinnoss5900 COULD YOU SHOW ME AN IMAGE, SO I CAN VISUALIZE THE PARTS ? THANK YOU FOR YOUR AWESOME VIDEO JUSTIN !!

[@justinnoss5900]

@@debfassbinder9283 Google “flat back post hinge” and click “images” and you should see an assortment of different types that may work. Feel free to call our office at 760-948-2428 and I can better assist you if needed. M-F 7-4:30 PST

[@dreamingcode]

Is there a hinge that will allow me to mount a wooden gate to a chain link existing post?

[@allamericanfenceerectors6594]

I am not sure. I have seen a hinge for a wooden "post" to a chain link gate frame but not the other way around. They make "j-bolt" post hinges that are a wooden lag bolt style to screw directly into a wood post for your male hinge but if your gate is all wood I'm not sure how you would mount a female hinge to your gate. Sorry I'm not more help as we don't deal in any wood products.

[@dreamingcode]

@@allamericanfenceerectors6594 I really appreciate the reply thank you

[@Eastbaypisces]

What size post I need for double swing gate?

[@justinnoss5900]

How big is your gate (each leaf) and what material is it made out of? ie: 8’ leafs (16’ opening), 1 3/8” gate frame with residential chain link on it etc.

[@Eastbaypisces]

@@justinnoss5900 I got 10' opening for driveway, was gonna buy the 10' one at hd

[@justinnoss5900]

If each leaf is 5’ to make the 10’ opening you should set 2 3/8” 16ga. Post with a 24” x 8” concrete footing. this size post will work all the way up to a 10’ leaf which would be a 20’ opening. Get a good stretch on the chain link that comes off the gate post and you should be solid.

[@Eastbaypisces]

@@justinnoss5900 ok thanks, I'm new to this, buddy did the fence long time ago, get back w more details

[@Eastbaypisces]

@@justinnoss5900 so im doing drive thru chain link, setting new posts cuz to my other post is 6" longer than 10' so ima do new posts, im using 1 3/8" steel tubing what size post do i need for terminal post i think? or is it what u said above??