Change of Trim with Change of Density

[@PRAVEENYADAV-jg5mb]

Beautifully explained sir. Thks

[@MarineGurukul]

Thanks for liking

[@discountcuppon]

Jai hind For preparation of second mate / DNS/ BSC nautical science/NCV come in #kundanpatna

[@raymondallenjhangiani7670]

Fantastic explanation ! ... 🙏 appreciate very much ! Thank you so very much Sir !.... 🙏 God bless you always , for all the educational videos you share for many to benefit in their career 🙏🙏🙏

[@MarineGurukul]

You are most welcome

[@vijeethunk]

Sir , your videos has always helped me and I have also shared ur videos with my chief mate phase 1 FOSMA batch , and the way u hv explained things with beautiful diagrams is exceptionally good . Slowly people are becoming aware of your KZbin channel and soon you will reach a million subscribers.

[@MarineGurukul]

Vineet, Glad to hear that. Thank you so much for the motivation. Health permitting, plan to add a video per week basis. Good Luck

[@KUNDANKUMAR-ik7ft]

For second mate / BSc Nautical Science/ DNS prepration join kundan patna #kundanpatna

[@ofehmi]

Very well explained.Thanks.

[@MarineGurukul]

Thanks a ton. Best Wishes

[@manishsharma-wz5jt]

Thank you Sir . Explanation is very helpful

[@MarineGurukul]

Keep watching

[@KUNDANKUMAR-ik7ft]

For second mate / BSc Nautical Science/ DNS prepration join kundan patna #kundanpatna

[@aleksandarbatanjac7685]

Dear Captain, could you be so kind to explain how you get MCTC = 206.505. (on time of video 20:55). All other figure I interpolate and were correct. But this one I get wrong. Can you tell me from which values you take interpolation? Best regards Aleksandar Batanjac

[@MarineGurukul]

It is obtained by converting the MCTC in SW (captured in the row above the one you are referring) to MCTC in DW of RD 1.002. Please watch following video: kzbin.info/www/bejne/gGPXinh_faunn6c

[@KUNDANKUMAR-ik7ft]

For second mate / BSc Nautical Science/ DNS prepration join kundan patna #kundanpatna

[@hiddenvariant638]

Very helpful video...

[@MarineGurukul]

Glad to hear that

[@discountcuppon]

Jai hind For preparation of second mate / DNS/ BSC nautical science/NCV come in #kundanpatna

[@anmolgupta3810]

very simple and good explanation sir

[@MarineGurukul]

Thanks for liking. Best Wishes

[@SierraMike87]

Sir, can we do demucking of chain locker at sea?? What is the procedure??

[@MarineGurukul]

If you see the construction of chain locker, it has a perforated plate over which cable is stowed. It is ideally done while the ship is in dry dock - where cable is ranged in the dock to facilitate chain locker demucking & maintenance However, if it becomes essential otherwise, ideal location will be at anchor - where most of the cable can be paid out. In extremely urgent cases, it can be planned in port by paying out cable on a hired barge. At sea, I am afraid, if demucking can or should be attempted.... PLEASE REMEMBER TO ALWAYS TREAT CHAIN LOCKER AS ENCLOSED SPACE FOR MAN-ENTRY REQUIREMENTS. Hope could answer your question. Best Wishes

[@ofehmi]

I think there is a mistake about trim change.First minutes you said LCB>LCF or LCBLCB etc .Which one is correct?

[@MarineGurukul]

it is between LCB & LCF. If LCG was used, must have been a slip of tongue. Apologies if it was so. Best Wishes

[@praveerthakur9013]

One doubt With the sinkage here LCB is increasing but actually when vsl @ EK with change in draft LCB decreases.... And if LCF is greater than LCB vsl is supposed to be down by head but in the image its trim by stern. Correct me if m wrong. Thanks in advance...

[@sumitkajla5563]

sir in first question we have to add value of sinkage in hydrostatic draft ??

[@MarineGurukul]

In Hindship question - No, as the new hydraft accounts for rise / sinkage In fixed particulars question - Yes. Best Wishes

[@amitpanda6363]

Sir in 2nd problem you have said tpc and mctc is given in SW ! But it doesn't mentioned in question . kindly explain?

[@MarineGurukul]

When hydrostatic particulars are provides and not explicitly stated about density of water, in ship stability, it is presumed to be in SW. Best Wishes

[@kandhasamy-ib4oz]

Sir nice explain regarding change of trim due to change of density. I have a doubt when vessel is in dock we have draft at some density but hydrostatic particular given for sea water density. So how we can get the displacement for dock water density ? Kindly explain sir

[@MarineGurukul]

Please watch the following videos: kzbin.info/www/bejne/aofdh4yZbtKdec0 kzbin.info/www/bejne/gGPXinh_faunn6c These will answer your questions. Thanks

[@SierraMike87]

Sir, will there be any change in LCF, TPC, Cb?

[@MarineGurukul]

1) Whenever there is change in draft - for whatsoever reason, for a normal ship-shaped vessel - LCF, TPC & Cb would change. 2) In cases where we do not have access to hydrostatic particulars, for change in trim because of change in density, we assume the waterplane area for the range of rise or sinkage to remain constant. In such case, TPC & LCF by default remain same over that range. Hope I have answered your query. Best Wishes

[@SierraMike87]

@@MarineGurukul thnx sir.. This hot topic now in mates orals..

[@darshanutekar1000]

Good video sir

[@MarineGurukul]

Thanks a ton. Best Wishes

[@aakash23100]

Thank you so much sir.. Alnilam :)

[@MarineGurukul]

Welcome Best Wishes

[@Loin675]

Thanks

[@MarineGurukul]

Thanks Tariq. Best Wishes

[@sailorpradip]

Si plz more stabilty clesses sir..request

[@MarineGurukul]

Will upload soon. Trying to close out Navigation. I am also keen to plunge into stability - as happens to be my favourite subject.

[@discountcuppon]

Jai hind For preparation of second mate / DNS/ BSC nautical science/NCV come in #kundanpatna

[@discountcuppon]

Ship stability all details come in #kundanpatna