👌Change of wheel train for Threading in parallel lathe in machine tools

🔔SUBCRIBE NOW! 👍 n9.cl/zr56
💖DONATE 👩‍👩‍👦😀
If you want to support the channel to continue creating quality and free content for all our followers.
✅https: //www.paypal.com/biz/fund? Id = G6WJA95UCVHBG
Change of train of Wheels for Threading in parallel lathe in machine tools.
Before starting a threading job, it must be taken into account that the feed must be equal to the pitch of the thread to be built. The master spindle receives its movement from the head shaft through a gear transmission. By setting the ratio of this transmission to the appropriate value, the master spindle can be given the appropriate turning speed to achieve the advance corresponding to the step to be carved. Consequently, if the step to be built does not appear in the threading table of the lathe; determine the combination of gears with the necessary gear ratio and place the gears in said transmission. For this, the wheel train calculation must be carried out to be able to thread on the lathe and a series of case variants are presented depending on the relationship that
exists between the step to be carved and the step of the spindle.
👇🔽🔻⏬🔔🔶 🔷 🔸 🔹 🔺👇
🙏Thank you for watching our videos.👨‍👨‍👧‍👧 👩‍👩‍👦😎😍
미쓰비시 PLC (MELSEC), 지멘스 (SIEMENSE) PLC, PROFACE HMI STUDY
미쯔비시 PLC MELSEC, 생산 자동화 기능사, 생산 자동화 산업 기사, 메카트로닉스 기사,
로봇, 6 축 로봇, 산업용 로봇, ABB 로봇
❤️ ⚠️ ⚡ 🚀
👉Subscribe to the channel✅🤣
/ @reynermairena1
👉Follow us: ✅🤣
Facebook FanPage:
/ aprendamosjuntosenlaes...
👉WhatApss Group✅🤣
chat.whatsapp....
👉Twitter✅🤣
/ mairenareyner
👉Linkedin✅🤣
/ reyner-mairena-57aa44190
👉Instagram✅🤣
/ mairenareyner
👉VK✅🤣
id55925...
👉Tumblr✅🤣
www.tumblr.com...
❤️ ⚠️ ⚡ 🚀
👌 #technology #tech #tech
👌 #Maintenance #Industrial
👌 # Reyner🎦👌

[@ronaldisaacriveraramirez6944]

Grasias profesor soy un jove de 19 años y tengo un año de experiensia ,veo sus videos lo felisito bien explicado ,cuando veo sus videos aumenta mis conosimientos,saludos desde Honduras .

[@hanns9560]

Aprendo mucho con usted amigo, saludos cordiales desde Chile

[@alejandroupia8887]

Yo soy de republica dominicana y estoy estudiando mecanica indutrial

[@alejandroupia8887]

Soy fiel seguido de su video

[@henryyela5140]

Mi estimado soy un fiel seguidor de sus videos, tengo un inconveniente con un torno marca bilcia c3 de origen español paso del usillo de 4, con caja norton, sucede que no tiene los piñones que van en la lira, por lo cual no puedo hacer rosca. como me podrias ayudar. ya que este torno me lo regalaron donde yo trabajaba

[@alejandroupia8887]

Reyne si un ba eser una roca y el tren de rueda no tiene el tren de rueda se puede contar la cantida de diente

[@reynermairena1]

Tu pregunta no esta clara o disculpame pero no entiendo bien Alejandro....

[@sebastiangalmes4511]

Una poronga

[@Thetorsd]

Sos bueno