Changing A Strut Using SK-3000 Strut Spring Compressor

Changing A Strut Using SK-3000 Strut Spring Compressor
Click the Amazon link below to order yours today!
amzn.to/2M19zjm
JacktechUSA.com or watch their videos at / @jacktechusa2504
Like what you see? Want to support my channel?
Check out Patreon.com/D6Spanky and get a prize!
OR use one of the links below to visit Amazon (and buy whatever you want)! Shopping on Amazon through my links supports my videos! If you're going to buy through Amazon anyway, you should shop after clicking on any of the following links.
M18 Fuel Onekey 1/2" High Torque Impact Wrench Kit
amzn.to/2VF7zgp
PB Blaster Silicone Lubricant
amzn.to/2ta99No
Fluke Multimeter Automotive Combo kit
amzn.to/2kT52jE
Gearwrench ratcheting wrenches METRIC
amzn.to/2kKiST2
Gearwrench ratcheting Wrenches SAE
amzn.to/2kqvfr4
Drift/punch set
amzn.to/2ePkyqw
2.5 lb Sledgehammer
amzn.to/2lk6vA3
1/4" Socket set with Ratchet
amzn.to/2kzMHon
3 Ton Steel Floor Jack
amzn.to/2kLJS4g
GearWrench 80546 5/8-Inch x 6-Inch Swivel Spark Plug Socket
amzn.to/2kLLwDd
Soft face hammer
amzn.to/2ePpvj9
Breaker Bar
amzn.to/2eTLzw7

[@wyattoneable]

Cute. Nothing like having Brian as a cameraman and mentor.

[@TT-dz8zf]

The compressor looks pretty safe and sturdy. Thanks for the demonstration.

[@D6Spanky]

No problem 👍

[@danmorgoshi7598]

..Nice video..!! The spring compressor looks very safe. / Thanks Appreciate.! ✌

[@theautomotivedoctormr.wils9217]

Most strut spring compressors , I've used . You compress the spring , so can leave it compressed . Then remove strut for replacement , while spring still compressed . Would assume this one can be set up the same way . To only catch spring while compressing it , for replacement of strut . Good video tool looks to be sound .

[@D6Spanky]

Yes (upcoming video on that) but this is how it was designed. Wanted to show those who might be interested how it read designed to work.

[@seanryan7896]

Hey I know it’s 5 years old but if you see this can you mount the bottom on part of the lower half of the spring or you should always use the strut as the lower base?

[@NewShockerGuy]

I need to do 10 struts for our vehicles and I am seriously thinking of buying this. The cheap autozone tool is sketchy at best and although it would work this looks like it takes zero time and effort to properly change out a spring. I'm replacing all struts/springs/top hats so figure this would be the way to go to properly do it and not have to worry about something catastrophic happening...

[@D6Spanky]

The biggest issue is having to take the spring back out. Strut Tamer Extreme by OCT is the BEST, imho.

[@DylanRabier]

Cool video Spanky! Looks like a very handy tool 👍

[@D6Spanky]

I haven't been able to use it much because of my back, but I look forward to it! I think it'll be great.

[@SmittySmithsonite]

I need to upgrade mine - it's extremely Chinese, lol. That one you've got there is 1000% better built. The real test is a strut out of the '07-'14 GMT-900 trucks (Silverado, Sierra) - those suckers are TOUGH! If it can handle that, it'll handle anything. When I went to upgrade the struts on my '07 to Bilstein in '10, no shop around here could compress them! Had to go to the dealer. Nice vid, Spanky, and great filming by Brian. 👍👍

[@D6Spanky]

I bet this could handle it!

[@ladotahir4763]

Nice tool 😊 i love this tool yes 😳😳😳😳. Ok.

[@pablofernandez5858]

Good afternoon, can you please tell me what the cost is?

[@D6Spanky]

I can't remember but I think it's 600-800

[@vin798]

yoooooooooooo your dreamy

[@SeanBZA]

Nice tool, just not worth it for me, as I only change struts every few years, so get by with the old compressor set and a strap to hold them together.

[@movaughn20]

Hey I recognize that voice, Briansmobile1, Ha ha I sent you the Oregon license plate... Nice job, be safe!

[@D6Spanky]

Cool! Did you get a Briansmobile1 sticker?

[@movaughn20]

@@D6Spanky LOL, no it was years ago... He does a great job correctly doing proper repairs with the correct tools.

[@D6Spanky]

@@movaughn20 He was trying to get stickers to everyone who sent him a plate. Email me at [e-mail] send me your address and I'll make sure you get a sticker

[@SJGINC]

Spanky your videos would benefit highly from a microphone. Your voice is always to low.

[@D6Spanky]

Thanks for the feedback

[@richardhilliardjr.4939]

Wow that is a fancy Fandango machine looks very complex very safe me I like to live on the edge I'll take a couple C clamps and chance my life. Living is about Taking Chances. If u dont take a risk no real reason to live. Really cool. Device what is retail on those

[@D6Spanky]

🤣

[@D6Spanky]

You can always come try it out if you want.