Changing hydraulic couplers on John Deere 6400

The hydraulic coupler sockets are leaking on the 6400 so I bought new ones. Hopefully this will fix the problem. Thanks for watching! Please comment, hit the like button if you like this video, and please subscribe for future video's. I created this video with the KZbin Video Editor ( / editor )

[@obvioustomost]

They are a metric pipe thread. I rep;aced mine with a standard coupler, I rethreaded the Male thread right over the top of the SAE thread. Cleaned the thread good and hit it with permanent (takes heat to remove) thread locker. Worked perfect, still gonig 3 years later.

[@jakeziegler599]

Good work Brad. Did u get much rain to day? I saw on the radar this morning rain was up by you now it just made its way down here. And ur right about parts replacement technicians at dealers are just parts changers anymore. Just guess what might be wrong

[@LVFFarmVlogs]

+Jake Ziegler Its been raining off and on. I think the total rain fall so far is around 1 1/2 inches. Its a little soggy again! Talking frost tonight. 85 last week, freeze tonight!

[@webbsuperiorbelties5800]

+larsonvalleyfarm Where do you farm? I'm central Wisconsin and woke up to white ground! Snow and frost last night, and colder tonight!

[@LVFFarmVlogs]

Seth, I'm about 30 miles north of Eau Claire. No white stuff this morning but they are talking frost tomorrow morning. I think mother nature is off her meds!

[@webbsuperiorbelties5800]

+larsonvalleyfarm Not too far away! I'm 40 minutes east of Eau Claire or so, I'm by Thorp. Mother nature's gotta straighten out here soon!

[@LVFFarmVlogs]

I'm by Sand Creek. I take pigs to Thorp?Turrenne auction!

[@oby-1607]

Too bad you can't swap to flat face hydraulic connectors as they leak far less. Only downside is you have to also swap the ends that plug into these to match. Cheaper than ordering from Deere.

[@cliffteasley3611]

same problem ,, changed over to a massey tip works great

[@blixtkrig]

Any common problems on these tractors?

[@firefighter215215]

they work we had to change all the ones on the 6110. they done the same thing.

[@karencarlson8416]

So tell me about the no till drill? I used a new no till drill and have to replace those too.

[@LVFFarmVlogs]

What would you like to know about the drill?

[@billwhitman1529]

More need for pressure relief on the bottom valves? I think I might have opted for the rebuild at $82 a pop! You can see them rebuilt on Onelonleyfarmers channel. Too simple. Thanks for sharing with us. We really appreciate the time you invest in videoing for us. I learn something every time!

[@LVFFarmVlogs]

+Bill Whitman I was going to rebuild them at first, but decided to replace them with new one's then rebuild them and have them for spares. I figured when I get a 7400 I would have back up outlets for the 64 and 74.

[@margaretcantwell7797]

larsonvalleyfarm

[@michaelneuman6910]

I know this is an old video but did you get it to work? We have the same tractor and have replaced them on the left side twice and no luck now all 4 remotes are leaking down and wont hold anything up.

[@LVFFarmVlogs]

Been working great ever sense. I changed out the factory outlets on my 7400 to these outlets as well... WAY better than the factory ones!

[@michaelneuman6910]

@@LVFFarmVlogs Good well I think we have a different problem. One set is leaking again this is the 3rd time and the other remote settles but not as bad doesn't leak just that outside one it is very frustrating.

[@LVFFarmVlogs]

Could it be in the valve itself? Maybe a bad seal?

[@michaelneuman6910]

@@LVFFarmVlogs Ya I am thinking it is behind it somewhere. Something is making those SCV's fail. gona get on my tractor forum and see what they say.

[@Masseydriver]

How many hp is a 6400?

[@LVFFarmVlogs]

+Massey1105driver Its rated at 85 PTO horse

[@1995jug]

Those are not pipe threads.

[@larrymullins78]

Jd is straight thread pipe thread is standard

[@farmingforfunandprofit940]

That is w hat is called and ORB fittings (O Ring boss) Did you notuce that in the end of the fitting there is a recess for another o-ring 9-That is for a flat face o-ring fitting......

[@ma61king]

No it isn't. It's metric ISO.