Changing the front discs and pads on my 2007 Ford C-Max

In this video I change the front discs and pads on my 2007 Ford C-Max.
If you enjoyed the video and found it helpful, please like and subscribe.
Links to the products and tools I used.
Eicher front discs - www.eurocarparts.com/search/1...
Eicher front pads - www.eurocarparts.com/p/eicher...
Brake caliper retraction tool - www.ebay.co.uk/itm/324083936626
Copper grease - www.ebay.co.uk/itm/132063407387
Wire brush - www.ebay.co.uk/itm/183992478945
Brake caliper key - www.ebay.co.uk/itm/143200032001

[@tamcarrigan8108]

Thanks. I was looking on YT for exactly how to change discs and pads on a Ford C-max. Your the only person out there I found. Really helpful.

[@fridonina]

Thanks mate ! Nice job for a sunny spring Day

[@stephemsley9781]

Just a quick note I found on your video. I noticed, when you finished installing the brakes, you had loosened your coolant cap and recorded yourself tightening the cap again? From other tutorials I cross reference with, it's the "brake fluid reservoir" (further back towards the windscreen, under the Cowl shelving by the wiper arm) that you release before retracting the piston. This allows fluid to draw back into the reservoir and air in the reservoir to escape. Reason for my checking out your video is I'm about to do all front and rear brakes and I was looking for where to put copper grease. I believe it's where the piston and caliper touches the brake pads, (metal to metal points). However, using your video compared to Ford Focus Videos, I have found what I need to complete the front. Gonna check out the rear brake video now. Cheers. Good Job!!!

[@spallsy87]

Funny story with the coolant… I tried to wind the pistons back with no caps removed and they wouldn’t budge… I loosened that, thinking it was the brake reservoir and the pistons moved. I still maintain to this day that somehow, it helped 😂 Thanks for watching. Glad it’s been helpful!

[@PaulJones-bu2ho]

Also a good practice would to take the cap off the master cylinder when winding the caliper back

[@spallsy87]

Funny story in that one. I actually thought I had took the cap off the master cylinder... turns out I took the cap off the coolant! 🙈 somehow made it easier to push the caliper back though! I’ve learnt since this video, shame I’m now back to work and the videos are hard to come by now.

[@deanoscott]

@@spallsy87 I was wondering what the hell you were doing 🤣🤣

[@spallsy87]

@@deanoscott I still maintain to this day that when I took the coolant cap off, it made a difference! 😂 the pistons didn’t budge, took that off and it worked 😂

[@deanoscott]

@@spallsy87 if it worked, it worked buddy hahahahaha. Good on ya. I have a set of pads to do for the front of a cmax tomorrow and just wanted to make sure there were no sneaky tools needed. All seems spot on from your video. Cheers for that matey.

[@spallsy87]

@@deanoscott yeah, the only things I had to buy were the piston tool and a 7mm Alan key. Easy enough job to do.

[@derekcronshaw4008]

Do need a break tool wind back caliper ona ford c max

[@derekcronshaw4008]

No thanks bought one ta

[@bythesea2784]

That the water not the brakes fluld cap

[@spallsy87]

I know 🙈😂 I still maintain to this day that after undoing that, the brakes were easier to push back 😂