Build A Tool Spot Weld Removal For All Old Cells Battery 18650 21700 26650

How to make Tool Spot Weld Removal For All Old Cells Battery 18650 21700 26650...
Thanks for watching, Have a great day !

[@ka24det]

I literally spent hours this week removing spot welds and solder from 18650's. Jehu needs to build some of these!

[@DanKoning777]

May I ask why people need to remove the welds/solder to begin with?

[@hippie-io7225]

@@DanKoning777 Let's say that the little "bump" on the battery is .5mm in height. Just 10 cells in series will be 5 mm added to the size of the battery pack. Also, cells will probably be re-welded. A nice smooth surface gives you a better connection.

[@DanKoning777]

@@hippie-io7225 // Gotcha 👍 Thanks

[@Yaman-D-Chhaya]

Sure Jehu needs these done

[@bsmithril]

If it takes similar time to build a machine as it does to do it without one it's definitely worth building the machine.

[@user-uj2yw1cc8f]

I follow you from the great Iraq🇮🇶🇮🇶🇮🇶🇮🇶🇮🇶

[@MUQTADA313]

حي الله العراقي

[@022po]

هاي شنو عراقي 😲😂😂😂

[@alicankorkmaz1587]

سلام عليكم اخوكم عباس من المانيا

[@voidex136]

How great Iraq on a scale from 1 to 10?

[@doglsmarnar7452]

عفية ابن اختي 😂😂

[@pauldorman]

You can find links to buy the servo with this search string: TZT DC 12V/ 24V DH-03X Large Torque Alloy Servo 380kg/cm 160A Mechanical Arm for Robot RC

[@GreenTechSumeethTamil]

Awesome, why no likes for this comment

[@marsrover001]

probably the most useful video on this whole channel. If I ever need to bulk process cells this is what I'll build

[@notcharles]

If the battery were loaded from the motor side ('back') you could see the result without removing the battery and flipping it over. WOW, you've got lots more parts and stuff than I have collected! Really nice work. Thanks for sharing.

[@ejonesss]

you may want to have a magnet or vacuum or stand the device up on end so the pieces are pulled away because all it takes is one tiny piece to drop in the positive end of the cell to cause a short.

[@gussrestu]

this is the real creative project 👌

[@kentuckywindage222]

You have outstanding content sir.

[@user-en9rc1lj3z]

Add magnets to collect iron filings

[@vinceianni4026]

Hello mister beautifully made good job well done

[@njfulwider5]

One of the greatest ideas. Would love to see a manual version with no welding. Something us newbies can do easily. But again a wonderful idea and build.

[@njfulwider5]

Been there done that! Pretty sure shipping cost a Pretty penny. @CreativeChannel

[@lpjunction]

The weld was usually less than 1mm wide, so a hand lever chisel should be enough.

[@ballardtech827]

Why not have him build you one. Then you wouldn't have to learn anything, like adapting his design to something you can build with the tools and materials you have on hand. SMH

[@dude1728]

You are very creative with your ideas. Just wondering if you have a parts list so others can make one to?

[@ahmadshawky7488]

You are really creative

[@user-vn7so5bs4o]

เครื่อง​มือทันสมัย​งานสวยงาม​👍

[@dgb5820]

This is the best tool ever

[@dannyperry8070]

very nice

[@Michel-Artois]

Well done , but be careful : you must absolutely not cut the insulation ring on the positive pole of the cell to avoid any (big) short immediately with the big blade!

[@TheSpotify95]

Nice idea, never even knew you could build something to remove 18650/21700/26650 spot weld marks. I will just keep with my old method of using cutters to remove whatever I can. Also, hope you have a good way of sharpening that tool, as the cutting edge will become blunt over time with trying to scrape away so many pieces of metal.

[@connorbuckalew1747]

Something I've found helpful, is to use a nail file after the cutters to clean it up some

[@barrymayson2492]

An ingenious tool and well made . Thanks for your time and work.

[@badeadrian]

Can you build some garden lights with 18650 battery? 🤔

[@mikeelley2131]

what a nice and a brilliant project.....i like ur work honestly

[@samirsaudsamirsaud7051]

He is such e great creative man❤️❤️

[@najiyakhatuun8703]

I watch your video from India 🇮🇳🇮🇳🇮🇳🇮🇳🇮🇳🇮🇳

[@bsmithril]

Anyone have a name or model number for that servo motor/driver setup? Looks like a 774 motor

[@baronweber6801]

Yes a link or model number would be nice thank you

[@catsnotcops_]

search for ASMC servo motor line

[@maniaksolder]

beautiful work.modern machine good work you

[@petkovasilev1419]

I wish i had your magic drawers, there is always what you need.

[@CooLDEaFy]

Wow what a amazing job you doin that thing..so intelligent creative you just made those.. that’s awesome.. god bless all.. thank for sharing video, you inspired me...

[@ahmedvvt98]

Almost 6 million 🥳

[@KHAALID_GERMNY.K238]

You are creative🇮🇶🇮🇶

[@Yaman-D-Chhaya]

Great tool but please mention the circuit used bro nice job very much necessary for battery guys like me!!

[@craigreich8046]

Would love one of these, sure would save frustration.

[@Reza_Rahbarazad]

I really love your work brother,plaese try to speak English, everyone speak English brother, easy to learn man, thanks ❤️❤️

[@jamingaming9251]

Currently only about a fifth of the globe uses English but it is fast becoming the world's common language.

[@sergio8795]

Donde se puede conseguir ese tipo de motores, cuál es su nombre? Gracias de antemano 🙏

[@user-hh3nj4oi3k]

ياريت اعرف اراسله لانه يصلح مثلها ويبيعها

[@MrLion-uh7ot]

Good jobe !

[@nurtalukder1088]

Please make a campign car

[@polisibuncittv8073]

First one

[@michaellichter4091]

A very nice machine, thanks for this inspiration.

[@mamidinaresh4053]

Very well said

[@user-kt2hb8xr3p]

Great job, thank you brother. You are so talented

[@iTechUnique]

Very helpful

[@GermanMythbuster]

⚠You can remove all the electronics and only use the DC motor! when you use limit switches and a index pin welded the rail. (ok, also 1 switch for up and 1 for down) It's much cheaper that way 🙂

[@piotrr5439]

ditch the motor too and attach a lever...

[@johnburrows7938]

Just do what I do. Use a dremel, far safer and easier than this. There are no safety measure on this, not forgetting one wrong slip! And the whole outer body of a 18650 is the ground?? And it’s on a metal base…😢

[@getyourkicksagain]

The Yakuza would be interested in your product

[@user-hh3nj4oi3k]

Excellent work. I wish I had such a machine. If you can make a machine like it, I will buy it from you and send it to me to Saudi Arabia. Please write to me if you would be so kind. If you agree.

[@jamesbronson8713]

Good job.

[@skilledcamman4752]

Great for industrial applications. Not sure if a hobbyist would require this.

[@catsnotcops_]

it depends. removing spot welds by hand and using a dremel is exhausting. disassembling only one bike battery usually is around 50 cells. building this thing also is fun plus a huge help. ill build one ;)

[@skilledcamman4752]

@@catsnotcops_ If this was much more replicable such as using 3d printing, it would've been great but for a one time ebike project doesn't make much sense imo. But if you play with cells a lot it would be a great idea.

[@nomanhossain1838]

Amazing idea brother, ❤️💗 from Bangladesh

[@mahbubhassan9413]

waw nice idea.thank you

[@eivindamundsen7090]

Awesome.I want one..

[@nhercb23]

its very convenient if you are working in table not always on the floor!

[@Mr.g077]

Instead of using your hand you can make it a circle so you don't have to grab it every time

[@yusufabdrahman592]

So good ii boss 💪💪💪👍👍😊

[@frytan2904]

14:47 - Perfect!

[@dieselphiend]

So talented!

[@user-kp4ht9fu4s]

Goooooooood, Nice idea~~~~^^

[@nischalthapa5528]

6m subs congratulations #advance 🤣❤️

[@talwarjatin]

Great innovation and a wonderful final result . However, I just wonder , how about adding a limiting block to not push the battery way too inside the groove. I mean , its now manually dependent on how much we push it inside .

[@ehsanehsani5364]

We Miss U Sir Please Make Videos Faster 😊❤️

[@JamesThompson-xl4yu]

You should add a catch bin for the sheared tabs

[@juwain3]

super !

[@luidesdossantos]

Bolsonaro 2022 🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷

[@Zeeshanshorts098]

First like first comment

[@gonzalez7805]

Beautiful

[@paulohenrique64]

Simplesmente incrível cara . Essa vc c superou

[@itsmoneyoverbitches]

I should make a hole so the pieces can fall in a container

[@martingonzalezmartin5805]

Saludos desde guadalajara jalisco México muy buenos videos 👍 creative channel

[@ofilipebezerra]

Without that explanation at 16:27 i was so confuse! 😂

[@de-bodgery]

This is fantastic! I want one!

[@N0G0MAIL]

Nice, but I'm not sure if that force cannot induce deformation and leakage. Other solution could be a grinding wheel to reduce the stress on the cap.

[@epicGamer333t]

Can you creat e huge powerful e- cycle ❤️

[@ghidrin1]

Great!

[@pedrojosecampos232]

Ya aburren con videos mudos muchas gracias saludos adiós Bay Bay

[@user-dw6fj1py1o]

nice, creative channel!

[@magy357]

Amazing! Now - because many of us can't build it by themselves, is there possible to buy complete machine?

[@rodstartube]

I CAN BUILD IT FOR YOU

[@GM_handle22]

Different thoughts 😍

[@CJerez89]

Why to use a motor if you activate it manually? A lever is simpler, overengineered... I forgot, this is actually a show.

[@imissyouchlm1432]

196 cc engine enka vankuvathu thirija sollunka pro reply plz pro

[@SmilingDevil]

What is this servo with Implemented arduino board called…?? They seem salvaged from something since you got quite a few

[@iTechUnique]

Very helpful idea like it👍

[@bahosmousa8563]

Kurdistan 🇹🇯🇹🇯

[@DeepQuote724]

create a oil stove

[@DMVPLUMBING]

What is that motor

[@ronst7343]

Where can I buy that giant servo look like and what do you called that exactly?

[@kaspereskildsen25]

Its called dh-03x on eBay

[@BeetleJuice1980]

What's the pcb you used?

[@Etechtamilan]

Super really nice 👍

[@vladp1263]

Ready to buy one. What is the price?

[@didiersee]

Congratulation. Could you give a link to the plan to make the mechanical parts only. So the shape and dimensions of the mechanical parts. Thank you for sharing.

[@puchalapallijishnu9807]

Helo bro i want iron gairs

[@bicyclerestoration2315]

Build 3d printer please

[@andyacosta3874]

what a clever idea..how about the materials?

[@KazeVuitton]

Güzel bir çalışma🎉

[@richierich7721]

Very nice work . Are the dyson batteries any good for ebike packs ?

[@numcnx4038]

Awesome

[@victorsapage]

Queres me vender essa maquina ?

[@manonwong8742]

Tbis is something unnecessary. Simply done by hand power.

[@rks.ai.ml.]

what was the point of heating and cooling rod in that oil 3:20

[@DanKoning777]

To temper/harden the steel which makes it hold a sharpened edge longer.

[@rks.ai.ml.]

@@DanKoning777 thanks man

[@DanKoning777]

@@rks.ai.ml. // 👍

[@creativitymeryem1920]

Goood 😉

[@nazaramanov2540]

Очень круто!

[@Atif_gammer]

🇮🇳🇮🇳🇮🇳🇮🇳

[@patelhemants]

I want to know which servo motor is this Please give reply

[@MohdGyver]

How to get the motor and the motor controller?