just a quick review of some issues I've had with this Honcho.patreon.com/Mi...
Пікірлер: 43
@drjd2real8 ай бұрын
I had my eyes on this but I'm getting the shockwave now
@mikeyachk4 ай бұрын
Yeah, stay FAR AWAY from this P.O.S.!
@RobertSaxe-e8h6 ай бұрын
Yeah I'm going to try different shells I appreciate the reply
@mikeyachk6 ай бұрын
Let me know what the outcome is! I'm gathering info on them. Hopefully we can all get our money back!
@RobertSaxe-e8h6 ай бұрын
So I got my new shells in their winchester 2 3/4, and some gun oil seems to be performing better this weekend. I'm going to the range, so I will definitely keep you informed. Thanks for the check-up....
@RobertSaxe-e8h6 ай бұрын
Charles daly honcho is still trash I suggest to everyone save your money and buy something else like name brand
@CHAOSTACTICAL4 ай бұрын
Thanks for this
@mikeyachk3 ай бұрын
Glad to be of service
@mikeyachk9 ай бұрын
Thanks for the comments, folks! Just started this channel out of disappointment but I've got a lot more, hopefully, good material for y'all!
@osameyi109 ай бұрын
Bro , I have it too and it sucks , definitely NOT reliable in any way , mine jams every other shell and you have to hit the buttstock against something to release the shell which is not safe , plus all the problems you had in the video too , By the way great video keep it up bro ,I understand the frustration of deception of owning that SG
@mikeyachk8 ай бұрын
Sorry to hear that, man. Have you sent yours in for repair? Thanks for positive words!
@l.s.54719 ай бұрын
Damn this is disappointing.. I have had my heart set on a Charles Daly Honcho since I set eyes on it... I guess I better get a couple more opinions and review videos under my belt. Question though if you've owned it for 4 months why are you only just getting it in your possession for a few days? Was it on back order after having purchased it?
@mikeyachk8 ай бұрын
The day I bought it, I was planning on doing some target practice but I couldn't get a she'll to load without the rear of the shell being halfway ejected with the extractor landing on the primer as I was trying to close the action. After avoiding the first shell exploding out of battery and halfway out of the frame. I tried a few more times to cycle shells through but it decided to release multiple shells inside the action, locking it up completely with a live shell in the chamber. I had to disassemble the entire thing to make safe... I called the factory and sent it in the next day. About 2 months later it came back. There was zero change in the safety issues, only now it was not releasing a shell until you closed the action, thus dropping a shell out the bottom. So I called again... sent it back, again. Around another 2 months later, it shows back up and I literally walked it down to my range and you saw the rest. If you're still reading, I really commend you for sticking it out despite my rambling. Thank you
@curtisdowling37737 ай бұрын
Mine did the exact same things and I had to take it apart and rework it and modified a few parts to make them work .
@mikeyachk6 ай бұрын
Keep me updated, if you care to. I'm always interested in others experiences with the same models.
@StephenSalaz9 ай бұрын
What if you just load 5?
@mikeyachk4 ай бұрын
I could load one and it wouldn't make a difference.
@JamesOpie-l9z8 ай бұрын
You have to load the gun exactly as the instructions say. To open the chamber you must push up on the "action bar lock, load I shell into the chamber and push the forearm forward. Then load your shells into the magazine. Then shoot, eject, repeat etc If you don't follow those instructions you wind up with the problems shown in this video. Again, read the loading instructions VERY carefully.
@mikeyachk8 ай бұрын
Do you have an instructional video I can watch?
@mikeyachk6 ай бұрын
Maybe you didn't actually watch the video... you'd see that the action was stuck. There's a serious flaw with that firearm. Waste your money if you want but if stay away from it... high likelihood of firing completely out of battery when trying to load the next shell... as the lifter raises the shell, it also kicks the primer side out so that the bolt closes on the crooked shell with the ejector trying to land directly on and set off the primer with the entire shell out of the chamber. You can choose to be a condescending prickbot... or you can believe your eyes. I'm not beating that POS on the table for nothing! Sent back to the factory 3 times and still a piece of junk
@RobertSaxe-e8h6 ай бұрын
I bought one thinking it was a bargain and I was wrong I raked it back and two shells fell out cause it was trying to feed 2 like he said I advise everyone who reads these messages to get mossberg or Remington this gun sucks
@mikeyachk6 ай бұрын
Sorry you got burned! But it's definitely good practice for... was gonna say: if your Mossberg or Remington ever does this... but those actually work right! My suggestion for anybody that has a Honcho, is to send it in to the factory as many times as it takes for them to get their shit right! Who else is tired of paying for crap?
@TheHeatherTube7 ай бұрын
Love this video!
@mikeyachk6 ай бұрын
Glad you enjoyed it!
@CHAOSTACTICAL4 ай бұрын
I thought it was impossible for a pump action Shotgun not to work
@mikeyachk4 ай бұрын
You would think buuuut this one was ridiculous!
@jamesheath8319 ай бұрын
Nothing would work correctly in this negative guy’s hands. What a joke.
@mikeyachk9 ай бұрын
Well I'm sure you can appreciate spending money on something and it not working out of the box... let alone, sending back to the factory, twice, and it still not work properly... hope I can show you the difference in a working firearm and one that you would only purchase if you wanted to learn how to clear malfunctions.
@moonmagnolia7Ай бұрын
Read other comments. It’s a faulty design/gun.
@mohamadfarag66328 ай бұрын
😍😍😍😍😍😍😍😍🥰🥰🥰
@mikeyachk4 ай бұрын
🖖
@stephenrodgers80099 ай бұрын
You don’t know what your doing the gun works fine…your all over the place this isn’t for you.
@mikeyachk9 ай бұрын
How's your channel going?
@Detman329Ай бұрын
Cheap mossburg clone,not worth the headaches
@mikeyachkАй бұрын
Not At All!!!! I wouldn't wish this on my worst enemy! And I don't currently have any!
@stevenlevesque7196 ай бұрын
where did you learn to pump a shotgun 😂😂
@mikeyachk6 ай бұрын
I would say your mom but she's better at that motion.
@Detman329Ай бұрын
@@mikeyachkI knew something like that was coming 😂😂
@skeets60607 ай бұрын
Ill give ya 20 bucks for it
@mikeyachk4 ай бұрын
Sent it back to the factory and told them to just keep it.