My labourer had a nightmare 🤦🏼

[@CharlieCollison]

Smash that like button 👊🏻👊🏻👊🏻

[@bricklayingwithamy1546]

I’ll smash you later 😈

[@lukeheasman350]

Where can I get my hands on those profile legs, they look very handy

[@grahamobrienverynicex9804]

Hiws you dont sell van

[@grahamobrienverynicex9804]

Got to be worth 6k

[@grahamobrienverynicex9804]

Charl when the link pks

[@Si6Si6]

3 water 1 sand and no cement 😂😂😂

[@leeyo5494]

charlies made some serious cheddar with his channel and his building well played

[@elonthun8012]

Beautiful work as always

[@OziBlokeTimG]

Like music, beautiful job. .... master craftsmen. Good as well. 😅❤

[@ad_gloriam_dei]

Hey Charlie, always love the videos. My two cents though - I would personally remove the automated captions on the video - KZbin's captions are decent enough for the people who need them, but the ones you've added during editing kind of get in the way and ruin the immersion, and sometimes (because AI is trying to scan and comprehend the speech) it comes out wrong.

[@JamesJohnson-ul9ox]

No leave them , they are hilarious 😅😅😅

[@tommyfallen9662]

When it comes to brick laying your the goat😮

[@simonclare333]

Hoodie needs to lay of the green before work 😂😂

[@brad265]

Gotta remind the labors to use less water when the sand is wet

[@steadfastandyx4947]

A difficulty in life is that if one doesn't know something then one doesn't know ; the sand is wet.

[@christianmills2674]

where did you get those profile support outriggers please charlie they look very handy

[@davecass9486]

rubish, flemish bond is 3/4 bond, set your pier out with queen closure and if you need to break the bond its fine to add an extra header in the middle of the wall but dont let it wander !

[@robertplatt1379]

Nice bricks looks smart

[@Thegoldentrowel]

Nice work mate hoodies heads minced

[@garydouglass9577]

Had to turn off after 5 minutes. Stupid , wrong subtitles 😮

[@claytonTR89]

Sand was probably already abit damp, have to be careful with the ton bags aswell as they get wetter towards the bottom,I found that out the hard way 😂 lovely wall 👍🏻

[@NotoriousCB1997]

Tyler was definitely smoking weed last night bless him😂 all have bad days

[@Kieran_G89]

Nah weeds not to blame here, I smoke an ounce a week 🪴 and I'm a great labourer (other people's words 😂) this guy jus needs more practice on the mixer ✌️🏴󠁧󠁢󠁥󠁮󠁧󠁿

[@NotoriousCB1997]

@@Kieran_G89 i smoke too mate! Was no dig at weed, just reckon he's had a smoke and feeling a bit stoned over😂 all the best mate

[@Kieran_G89]

@@NotoriousCB1997 ✌️

[@Bigtimecharlie1349]

I smoke a oz a week too. I need to cut down or have a tolerance break. Smoked it every day since I was 14 😂

[@ToddEvans-uq2il]

Couple of proper hard nuts

[@neilgibbs3880]

Great van I’d love to win that. Only issue is it’s got all those horrible Brickies tools with it. What’s a plumber like me going to do with those? What the hells a spirit level? 😂😂😂

[@CharlieCollison]

If you win I’ll keep them 😊

[@neilgibbs3880]

@@CharlieCollisonBest do. Even after 2 years of watching your vids I shudder to think of the damage I could do. 😂😂😂

[@denzilthick6421]

I will buy ten tickets Iam in New Zealand 😜

[@harryduthie7438]

Unlucky Tyler keep ur chin up

[@brandoncattermole9403]

This video is amazing

[@PeterEndelt]

Hold the water 😊👍

[@Liam-js6qg]

What’s the mortar mix mate

[@ДмитрийСамарский-щ4п]

What is the size of the trowel? 9? 10?

[@grahamobrienverynicex9804]

Good vid charl .

[@JonnyWilkinson-yh3ct]

Schoolboy error. The mixer sounds under pressure to.😂

[@jamesgreene8629]

Can’t deal with the subtitles that i cant turn off.

[@hiimawasteoftime8678]

Everyone has a bad day every once in a while

[@shifty277]

Tyler was like "oh the mucks a bit wet - does that mean put some more water in it so it aint so waterish" hahahahaha Great episode - not sure about the A.I subtitles with the editing

[@williammacdonald1987]

Always set out in stretcher bond

[@lukeheasman350]

Where can I get my hands on those profile legs, look so much easier than using two scaffold boards

[@richardstetson8221]

When I looked for them I found Rhino build profile outriggers/stabilizers look that up but I've also seen him clamp 2x4s to the profile then to a block on the ground wich might be easier than using scaffold boards but it would definitely be nice to have those legs

[@Trekz86]

Wherea the link for the raffle ?

[@hamzamati9799]

Good Charlie

[@pofkebiceps8676]

Stop adding water Quality bro :D

[@chris-w4n9w]

Why the Subtitles??

[@dazza9448]

Common sense would have him put the mixer on the end of the sand so he’s tipping facing the skip rather than pebble dashing the back of the nice black van. My boss would go mad if we so much as got a drop on his van

[@ДмитрийСамарский-щ4п]

Какой размер мастерка? 9? 10?

[@andywest3260]

Where is the link for the raffle

[@JoeObrien-lh8kz]

How come you haven’t been promoting the new fitzbrick profiles Charlie . All the other fitzbrick gadgets have been introduced to us by you .

[@maxpower1797]

They fell out, so derby brickwork show them off now

[@joejones5101]

It's the teacher. You get wet sand and wet sand.

[@itsmewayne428]

You've got a Changy trowel 😮

[@CharlieCollison]

Huh? Got a video using this trowel a year ago

[@richardstetson8221]

Phil from Philly got everyone using the coke trowel

[@brickbybric]

Lads putting to much water in and he’s probably shovelling the sand from the bottom where it’s wet . Top of the pile of sand looks dry enough

[@E69apeTheMatrix420]

Keep the perps and beds at 10mm all the way. Its structural and symmetrical. Looks way better. 8mm not enough muck for the expansion contraction / adhesive quality between bricks. I hate when not enough muck squeeze out or a brick is moved a few mm over instead of being re laid. That brick is literally loose in the wall. You need that squeeze grab adhesion on every brick or its not laid its just placed. Very big difference. Try knock one out the next day thats been laid vs laid then moved after so it looses the suction adhesion. That brick will just knock out the wall easy. A massive weak spot 100 needs the compression into the muck and a 10mm bed to be properly done. I know how I sound as well. lol

[@hod2116]

Structurally it makes it stronger with smaller beds and perps as the muck should be weaker than the bricks

[@E69apeTheMatrix420]

@@hod2116 you need more to allow for expansion contraction. its the suction of sticking the brick when you lay it aswell. code is on point for good reason always

[@floky7238]

On 7:56 you catch him 3rd time adding wa ah XDD,

[@patrickbooth3168]

LINK FOR THE RAFFLE ANYONE 😢

[@chopperharris6086]

just inexperience from tyler wet sand catchs out lot of labourers.

[@JoeObrien-lh8kz]

Sand looks dry and it was covered . Never shovel from the bottom of the pile if it’s been raining over night all the water percolates to the bottom of the pile . Looks like the lad is just over dozing with water .

[@chubbychubs4636]

The smell was a cat in the sand 😊

[@shifty277]

Also ow on earth have you managed to get 1.3m subscribers but the vids are watched by 20-50k on avg?

[@patrickbooth3168]

How the hell do i enter the raffle charlie boy😂

[@poaldavidson4]

correct me if I’m wrong but won’t three quarter header three quarter be 2 brick Flemish bond second course being header stretcher header

[@Tedthehammer]

Tlyer you put way to much water in the mix plus the sand was all ready wet it looked like piss lad shouts to ami and the little man

[@davidmg1925]

14:30 you pulled her hair you shouldnt do that.

[@mattslade5196]

Be rude not to leave a set of profiles in that van of yours that’s on the raffle ❤😂😂😂😂😂

[@colinfort8725]

Surly that’s down to you boy!!boss etc ?

[@brickbybric]

And some blokes you get tell them and show them 40 times and they can’t or won’t take it in .

[@pauleric8799]

the sand was wet never needed water added

[@Si6Si6]

Thought it was milkshake 😂

[@fredhow89]

What a prize

[@andywest3260]

Get the labour to pay for a van wash

[@brandonwright9031]

No he earns enough money

[@lmilne4859]

Wee stubbie,s as measuring tape go on 😆😆🤙

[@nigeats65]

SMASHED...!

[@DaysOfDarknessUK]

Cow shit mix - just keep adding water

[@TheWanderingMason]

So you hire these muppets with a CSCS but you don't hire quality labourers without one?

[@Whitewolf1991]

Someone's salty 😂

[@jerryweston4097]

Oyy eyebrows congratulations on your newborn..wheres the link?!!!!!!!!!!!!!!!🚛

[@mattslade5196]

Paint brush muck😳

[@steveng5503]

MORE GLUE PLEASE TOM! Toms glue is the bestest. Tyler is working for the suppliers I think. 🫣🤣

[@g.rajkumar8770]

Iam from india i need job iam a construction brick layor block mason plasterer 15 years experience please help me bro

[@Itsmetheworldsgreatest]

That labourer needs to get an office job

[@Elliott1986]

You gotta start from somewhere, that's why there's a shortage of brickies because of that sort of attitude

[@TheSNIPEZzz]

​@@Elliott1986Most young lads get driven out the game that way lol. Gotta be really desperate to stick with a militant boss

[@wumpty93]

@@Elliott1986 There's a shortage of brickies are most sites treat bricklayers like shit? Not covering the materials up when it rains and leaving them in mud. Been in the trade 7 years now. Wish i didn't bother learning it and worked a normal job from the start. At least you're guaranteed a mortgage and set wage at the end of the month and you aren't killing yourself breathing in silica dust on the daily. Not to mention the amount of time you lose for it being too cold, wet, hot and or poor organization from site management / other trades.

[@Itsmetheworldsgreatest]

@@Elliott1986 no , common sense says don’t add water if it’s too wet ffs 😂

[@Elliott1986]

@@Itsmetheworldsgreatest but these are all things an apprentice/Labourer will learn. I'm sure you've made mistakes in life but learnt from it and this will be no different

[@paulbriggs5003]

Where did he get those profile holders anyone please

[@richardstetson8221]

Look up Rhino build profile outriggers/stabilizers those are the first ones that came up when I looked it said they had them in stock