Chassis Fabrication - How To Box A Frame.

[@MortskeRepair]

Finally an educational video! The other ones usually made me feel dumber. And that’s saying something!

[@OKspeedandcustom]

Haha. We listen to you. Thank you for all the help. Dumber Mortske is no good

[@leechamlee1347]

Thanks for another tip of the day!

[@docshreck4]

Slick you could sure show that hack Dan at DD speed shop a thing or two! Lol

[@midwestkustomz6350]

Has has a way of teaching us don't he?? Lol

[@Mohawk21-oi1nit]

@mortski, you mean you get to learn from SLICK 50???

[@unclebuzz6913]

I asked Santa for an OK Speed and Custom Hot Rod.... I am in my 60s I doubt if Santa comes to this hell hole Commifornia . I am retired piping superintendent from Texas,live in the desert,so drive bys are not a thing here,however them Reindeer are up for grabs.He will not have a problem with that further north,south east or west of my house as everybody is Vegan or Vegetarian.. PETA might be a problem, and no firearms,however I have a compound bow and have been shooting one since 1975 ... You give an old fart hope that the youth of our country are not ALL TOOLS... GOD BLESS YOU AND YOUR LOVED ONES HAVE A VERY MERRY CHRISTMAS. WISHING YOU AND YOUR HEALTH AND HAPPINESS .

[@OKspeedandcustom]

Thank you so much! Merry Christmas!

[@Wingnut_Stickman]

I like a 40 minute video, so I paused it for 16.5 minutes about half way in. When everyone chips in, it just gets better and better. Excellent video! Thanks for sharing.

[@OKspeedandcustom]

Haha thanks for watching

[@jimmiebrown5014]

Looking forward to the long videos slick 50 can't wait to see them love you guys

[@jonlennon3348]

You are a true artist. You may not have cnc equipment but your work ethic exceeds many channels I watch. Merry Christmas and Happy New Year.

[@OKspeedandcustom]

Merry Christmas! Thank you !

[@jameswalker8499]

Perfection and its finest. Always a pleasure watching you work young man.

[@OKspeedandcustom]

Thank you!

[@shaunlesky1048]

Hang with the right KZbinr you will get a family back just keep doing your own thing

[@kennethsonier1766]

Good afternoon from Cape Cod ⛵ Slick, you really do some fine metal finishing, that roadster is coming along awesome 👍 I'd like to wish Charlie and yourself and all your families a very Merry Christmas 🎄✌️🇺🇲

[@OKspeedandcustom]

Happy Holidays from Both of us! Thanks for your support. (As always). 🙏🏻

[@vet11b]

I the same way with this channel as I am with puddin's 2 channels no matter what y'all put out content or length of the video I watch anything that is put out from beginning to the end religiously

[@OKspeedandcustom]

That means a lot! Thank you for your support. Merry Christmas!

[@andrewthiel9351]

Same here both have great content and it’s awesome to watch the channels grow

[@jamesraddatz2613]

Your videograghy is getting better! Merry Christmas

[@EverythingN.Nothing]

THIS IS WHAT I WANT Down and dirty how-tos on stuff I'll never do 😂 Seriously good vid Edit: AND MERRY CHRISTMAS!!!

[@OKspeedandcustom]

Thank you! Merry Christmas and happy holidays!!

[@MrBlake1249]

It’s a dream to get to work on deuces all day, I love the channel

[@OKspeedandcustom]

Same dream! Haha

[@edwinbonnelljr1587]

Wow that's cool as hell and you even know what you're talking

[@OKspeedandcustom]

Thanks for watching!

[@robertjones1709]

Cool fab work Slick, you won the fitment fight. Like the wiring tube 👍 also "Slick" can't wait for those Ok Speed n' Custom tees !! Yay! Merry Christmas!! to you and your Family

[@OKspeedandcustom]

Merry Christmas Robert!! 🙏🏻

[@robertjones1709]

@OKspeedandcustom give us a heads up! On those Tees Man. I like your enthusiasm with that metalwork Slick 👍

[@whoaaanelly65]

Slick, you remind me of me doing things you and I both know NOBODY ELSE WILL SEE - and yet you do it. And somehow, I don't know how, I suspect you do it whether the camera is on you or not. It is a sickness, I know, but I like it. FWIW, I'm the guy who sent Jacob those 3 Autolite 2100's and there was a Chevy Luv manual in that box for you. Hopefully Puddin gave it to you. LOL Merry Christmas guys.

[@OKspeedandcustom]

Thank you! Merry Christmas!

[@xozindustries7451]

Good to see you getting some progress done, Happy Holley DAZE!

[@OKspeedandcustom]

Merry Christmas!!

[@pnwDatsun]

Haven’t watched it all the way through yet but came here to say ahead of time.. great video Slick!

[@OKspeedandcustom]

Thank you!!

[@richardenright3170]

You are a master of your trade, SLICK!! I really enjoy your videos 😊😊.

[@OKspeedandcustom]

Thank you!

[@chetSeminole]

Dauumn son that's impressive! Love to watch the process.

[@OKspeedandcustom]

Thank you for watching!!

[@JimBosGarage49]

Thank you teaching us how to do stuff

[@OKspeedandcustom]

Thank you for watching!

[@paulweigle6872]

Great video as usual. You got an eye for fab and finish for sure. Hope you guys and families have a Merry Christmas!

[@OKspeedandcustom]

Thank you and Merry Christmas!

[@robertquartier9379]

Merry Christmas Slick and invisible Charlie....

[@OKspeedandcustom]

Haha Merry Christmas!

[@00nutt]

Merry Christmas and Happy New Year to both of you and all of your families!!! Thanks for the great content!!!

[@OKspeedandcustom]

Thank you so much! Merry Christmas and happy holidays to you and your family!

[@mrclaus859]

Thanks for posting Slick

[@SchmokesShop]

Future Schmoke thanks you for this video. Finally got my beetle A pillar back in one piece, get on that oval!

[@OKspeedandcustom]

We need some Oval parts to move forward! Thank you!

[@launceherron]

Awesome

[@OKspeedandcustom]

🙏🏼

[@matthewcox1122]

Like how you coated the inside of boxed section 👍thinking ahead

[@marlanappel6120]

Lookin' good, keep up the good work.

[@OKspeedandcustom]

Thank you!!

[@kimberlywilliams9757]

Merry Christmas to you and your families! God Bless! ✝️🎄🎁

[@OKspeedandcustom]

Thank you Kimberly. Merry Christmas and happy holidays!

[@KobyChavez]

Good old Dyslexia I gotta love it sometimes.

[@JimmyMakingitwork]

I was getting ready to type about the Eastwood product and there you went about it, haha. Nice work! I need to build another 30's car or maybe a pickup, good fun.

[@br549200]

Merry Christmas Bro Ham! Greetings from northwest Missouri.

[@OKspeedandcustom]

Merry Christmas!!

[@mattnelson5322]

Merry Christmas Slick and Charlie!

[@OKspeedandcustom]

Merry Christmas to you too!

[@derekwalters6132]

And definitely had a chuckle, when you said “ I’m a little particular” after that last video on the 32 where you practically took the front of the roof off because the one pillar was 1/4” out when most people wouldn’t have noticed, that was a bit of an understatement. You’re a craftsman and craftsmen are picky at least the good ones are.

[@OKspeedandcustom]

@@derekwalters6132 😂😂 thank you!

[@That70sChannel]

Merry Christmas slick. May this coming year exceed your expectations

[@Fattboy79]

Another great video that I can learn from you guys are slaying it keep it going. Merry Christmas and Happy New Year 😊 God bless you and your families

[@robertthacker8868]

Great content! Love the channel. You’re a talented person Slick!

[@donaldhalls2189]

Getting it done, thanks for sharing, all the best, Have a Merry Christmas

[@br549200]

Slick on Sunday!!

[@OKspeedandcustom]

👋

[@michaelmount76]

Thanks for another great video Slick

[@shanewright6958]

Another great video. Looking good 👍👍

[@williamlovely450]

way to go slick

[@OKspeedandcustom]

Thank you!

[@chair6899]

Merry Christmas to you and Charlie, good luck for 2025.

[@OKspeedandcustom]

🙏🏼🙏🏼🙏🏼 merry Christmas!

[@michaelhallas6450]

Good Video . Like when someone takes the time to make a nice job in the end . Looking forward for those long videos . Thanks

[@OKspeedandcustom]

Thanks for watching

[@NealDavid-t7k]

Merry Christmas Slick Fity. Love the content. Keep it up and you also will be like Puddin and Mort. LoL 🎉

[@NlessBuzz]

Merry Christmas 🎄🎄

[@johnkranz4004]

Good work Slick and Charlie Merry Christmas 🎅🏻🤶🏻

[@OKspeedandcustom]

Thank you! Merry Christmas!

[@stevecr8934]

Good learning experience. I think for both your viewers and You. Showing how and why you work metal. Your doing well. What grade is the frame metal? Looked maybe 1/4" thick. And YES. Paint the insides. Looking at older cars being rebuilt. The panels inside rust away before the outside. Have a Great Merry Christmas Slick and Charlie. This time next year.. Couple of Millionaires. LOL

[@OKspeedandcustom]

lol. Millionaires . Maybe if we win the lotto. The boxing plates are 10 gauge.

[@ksfedtfam]

Great video!!! Keep it up! Merry Christmas!

[@rickchavez5822]

All right here we go time to learning some shit this is great thank you and God 😊

[@peterouellette3874]

Nice work

[@nicpineda1887]

Cool videos

[@OKspeedandcustom]

Thank you!

[@number7__879]

Yes Sir!!!

[@OKspeedandcustom]

Let’s go!!

[@ericcorse]

Great video full of good teaching info. How thick is the boxing plate, it looks at least 3/16". That ought to hold.

[@OKspeedandcustom]

Thank you! 10 gauge

[@brianhayes7618]

You do some nice work Slick. You should teach Jacob how to do the same lol

[@OKspeedandcustom]

He is the man! Thank you for watching!

[@nick540g]

I really enjoy watching your work and would appreciate hearing a bit more background at the start of each video. Is this a purchased frame that you're preparing for a customer? Why are you boxing it? Are you going to install a body on it? Looking fwd to seeing your shirts!

[@kambacktransam4840]

merry christmas keep up the good work THUMBS UP GUYS!!!!!

[@OKspeedandcustom]

Thank you!

[@jasonflowers3830]

Nice work Slick! Merry Christmas!

[@OKspeedandcustom]

Merry Christmas!

[@jasoncox3302]

Nice video

[@midwestkustomz6350]

Hey slick, not sure if you have one of those barrel sanders like Eastwood has but, they work killer on things like cleaning that rust up. Also harbor freight has a Bauer one that they sell that's cheaper. Keep up the good work work bud! 👍👍

[@OKspeedandcustom]

Thank you!

[@midwestkustomz6350]

@OKspeedandcustom your welcome

[@derekwalters6132]

Hey Slick my wife speaks German and the words under Metal Flux are Welding Copper

[@OKspeedandcustom]

Good to know! That’s awesome. Tell your wife thanks!

[@JCS1069]

Hey Slick, is that a frame for a old school ban saw in the background? How do you charge for your work by the job or by the hr? Keep it coming and Merry Christmas and happy new year.

[@OKspeedandcustom]

Yes it is. Charge by the hour. Thank you! Merry Christmas and happy holidays!

[@budgetmerch]

To make it look like there are not boxing plates there I would use a paper/card template to fine-tune each plate so that the fit is more precise and you don't need to add small pieces in at the end. Good work, though.

[@OKspeedandcustom]

Thank you!

[@TheSandman614]

Nice helmet hair!

[@larryalexander4833]

Good Sunday morning everyone 🌞 Good info and appreciate the wrenching 🔧🛠️🪛🛠️🏁 sending everyone best wishes for a Blessed CHRIST mas 🙏✝️ Remember everyone Jesus Christ in your life is the answer through it all. Give him a try ✝️🙏💪👍

[@OKspeedandcustom]

Good Morning! Thank you!!🙏🏻

[@jeffsnyder2051]

hey brother, dont forget bushings on those wire chases!.i know you know.lol.

[@Slick50-or1ok]

I don’t know lol what do you mean ? 😂

[@paulriggers1558]

MERRY CHRISTMAS ! + happy new year to you + your families, [bit late, but i still have bad flu] how thick are your new panels, compared to the original chassis [from over the pond, don't know "gauge" measurement, sorry] when finished, will it all be fully seam welded ? keep it up young man

[@marshallcrank]

Cool stuff in

[@delinquentdesign]

Hi Slick, why dont you weld in the box reinforcement before the x frame? And you can just trim the ends if it interferes with the x frame piece till it fits up perfectly.

[@Slick50-or1ok]

I do it because it adds strength to the over all chassis. These frames are pretty flimsy so welding the x frame inside the frame then welding the boxing plates to the x frame makes it even stronger.

[@AndrewGeorge-ig1fn]

Any explanation why you did the x member before boxing plates ? I figured you would want to do boxing plates then x member. That’s how I did my 32 chassis and I feel like it was a little easier then the way your doing it.

[@OKspeedandcustom]

Welding the X member inside the frame gives added strength opposed to welding it on to the boxing plated,

[@josephhaynie4398]

So coo

[@OKspeedandcustom]

Thank you!

[@Mohawk21-oi1nit]

SLICK, MERRY CHRISTMAS! TO YOU AND YOURS .... GONNA ORDER MY HOODIE AND HATS.... SO SIGN EM, PLEASE....EVEN IF YOU HAVE TO TAKE ONE OFF YOUR BACK OR HEAD .... STILL LOOKING FOR AN OLDS VISTA CRUISER 71 OR 72..... KEEP AN EYE OUT FOR ONE!!!

[@OKspeedandcustom]

121!!! Merry Christmas! We are on the lookout for you!

[@Mohawk21-oi1nit]

Then , I cannot FAIL!!!!

[@jcnpresser]

Dang you gonna tig that frame and grind it off? 😢 I personally like seeing welds, but I get it. Why not mig it? If you plan on grinding it smooth? Just was curious.

[@OKspeedandcustom]

We Tig everything. Just the preferred method.

[@jcnpresser]

@ got it! 😉👍

[@joeburns1571]

When dealing with the pipe, couldn't you cut a section a few inches longer from the corner out and fit that, then weld in the longer section left over? Seems it would make it quicker and easier to me, but I ain't a fabricator.

[@OKspeedandcustom]

Always a few ways to do it! That’s the fun part!

[@gregorygibson5455]

Hello slick

[@OKspeedandcustom]

👋

[@garfixit]

😊😊😊😊😊😊

[@ryandonato8563]

Hey slick where's the merch at

[@OKspeedandcustom]

On the way!

[@cliffordplasd8239]

How can I contact you as I will be hosting an event this summer and want to invite you

[@OKspeedandcustom]

Where at?

[@cliffordplasd8239]

@OKspeedandcustom in Alabama called the Bama bash. It's a derby enduro race/car show June 21st. You would be the guest of honor along with Wild Bill pudding if they accept as well. You are more than welcome to compete and if need be I could rustle up a few vehicles tentative date if June 21st

[@Javierdos501]

💪🤠

[@RebeccaGriffin-b8n]

Have you stolen Puddin's " rose coloured" SAFETY GLASSES

[@OKspeedandcustom]

Haha yes

[@81500SEL]

Too bad i can't watch your videos anymore, the videos have a different language now. (german...) i cannot change this in the settings, keeps popping back to german...😭It is horrible to hear a different language in the videos. Hopefully this issue gets fixed.

[@OKspeedandcustom]

Wow that’s unreal

[@81500SEL]

@@OKspeedandcustom Yes, i have asked @youtube if this can be resolved. have not had a answer yet...