Cheap $800 Copart 2007 Chrysler Pacifica - Win or Fail?

[@AutoAuctionRebuilds]

If you don't watch to the end, you're missing something REALLY BIG!!

[@joshdanial8945]

Ok I will

[@pengu4932]

muffler is also looks cracked I think, aside from that wishbone

[@tomtheraton3058]

I Always watched all

[@fluffy1346]

Always enjoyed watching ur channels randy

[@Jerry-dk8se]

Yeah, waiting for Sunday, to see the AMC

[@christophercarpenter4008]

Forklift damage worst thing about copart man forklift drivers just don’t care and damage vehicles all the time. Nothing u can do about it sadly. Sucks man thank goodness it’s a simple and relatively cheap fix.

[@TwentytenS4B8]

Randy isn't the only one this happens to. kzbin.info/www/bejne/d6utlJ5qgMaiapY

[@jorgebobe9329]

Yes seem when the Goonzquad get a car the place them like a pile maybe that's why mo one tip them

[@StuntZxPRO]

I don’t think it was the forks from the loader because if you see the rubbing on the plastic wheel well it’s been rubbing for some time, so it had to be in a small fender bender.

[@AutoAuctionRebuilds]

Very true!!

[@Tex1961]

@@AutoAuctionRebuilds That makes sense but where the part snapped looks fresh on the video.

[@pengu4932]

I went back and looked at that first vid and the back wheels were sitting a little odd but it definitely didn't look like that in your walk around. Gotta just remember to look under the cars you have interest in just in case !

[@mexicanspec]

@@AutoAuctionRebuilds Randy, go back and look at the Copart pictures. They took a picture of the wheel bent like that to point it out specifically. The forklift did not do this.

[@Geemisman]

It is broken at transport is my opinion.when you drive it a few meters you here the sound of rubbing the tire.. when the tire is around 50 times you have that mark allready.. Sorry for the bad english , but i wanted to comment.. Still a great flip , but just show copart some footage and they will help you.. i'm sure of. Greetings from Holland

[@id776]

Randy I’m so glad you finally managed to hang out with these guyz Westen is hilarious And JR makes everything look so easy to do Two very genuine guys

[@Alexscott100]

The Pacifica is a nice vehicle. Neighbor had a 2005 AWD that I sold for her to a friend it had over 300,000 miles on the 3.5V6 and original transmission. It was loaded. Was red with black leather, navigation. Rear DVD

[@axxisblack]

Always loved the Pacifica, it's something different

[@2steaksandwiches665]

I liked these. They had the nav in the gauges.

[@jorgebobe9329]

To me,Pacifica is way better than Town and Country

[@geraldcoe1123]

Randy, I think if you price it around $1,995 and you can get somewhere around $1,650 to $1,795. It is high miles, but it will clean up really nice. For 200k miles, the interior is in great shape.

[@corionh4775]

Depends on the market. He could probably get over $2k for it out there... Here in Detroit it would barely be worth the $1,100 he bought it for with those miles despite how clean it is.

[@CarringtonHollister]

Fun fact: this Pacifica is built in the same plant as the current gen Pacifica (Windsor, Ontario)

[@outmybitness]

I ABSOLUTELY LOVE these pacificas

[@backyardgarage8285]

My dad had a 2005 Pacifica base model. FWD and the 3.8 v6. Super clean had like 180k miles or something like that. Leather seats. Very well optioned for a base model. And it was absolutely amazing. I like the pacificas.

[@SILVERBACK69]

That’s one thing I don’t like about Copart. If they damage something it’s on you ... that’s crazy. Have a good day Randy 👋🏼

[@fluffy1346]

@silvaback what's uppp

[@yazanbaddawi9683]

Dude, if I remember correctly IAA is even worse. They would damage it and if you complain they would simply say "it's your problem!". IAA did that to one of Randy's cars but don't remember which video though!

[@TwentytenS4B8]

Samcracc had that happen to him. I forget which video it is but he mentioned that there was no damage on the rear of the car when he bought it. He showed the pictures, then when he gets the car the quarter panel is bashed in. EDIT: here it is. kzbin.info/www/bejne/d6utlJ5qgMaiapY

[@yazanbaddawi9683]

@@HemiLyfestyle then I invite you to go back to Randy's video and see it yourself. Don't take my word for it!

[@makpsv]

With how much that wheel must have been bouncing around I would definitely change that brake line, probably got stretched pretty badly from the movement. I would not trust it and for what they cost not worth the risk of it to blow up while trying to brake.

[@brian5o]

I was thinking the same thing, I definitely wouldn't trust the brake line after that. Better safe than sorry.

[@TwentytenS4B8]

Yup change the brake line. Guaranteed the integrity of it has been compromised.

[@HFTONE]

I know what happened! It got hit, probably pretty hard.. The rear wheels are adjustable, and they have stainless steel brake lines, so yeah, it was in a wreck!

[@ohheyitsdezz3609]

FYI when the key is in the ignition the remote won’t respond you have got to take it out

[@steventartamella454]

If it is the 3.5 liter, it is known for head gasket problems. Pacifica. Thats good you got 4.0 liter. :-)

[@NH-gb5dk]

I really enjoy the detective work on the causes and fixes of the common car problems that happen to all of us . i started watching all of your vlogs before the 300 dollar a month garage that flooded all the time .

[@raymari7658]

If you don't check the engine cradle your doing someone a hug ed injustice. The engine can fall out the bottom in the worst cases. There was a Chrysler recall but it only covered cars built in a few chosen months. Your 07 is above the mileage requirement. I know this problem well. I have an 04 Touring that I had to replace the cradle on.

[@JerrysEdits]

Just googled "2007 Chrysler Pacifica" because my dad recently bought one and your video popped up, nice to see you had one to randy

[@terryl6706]

My brother has a 2006 Pacifica as a get around vehicle.If you fold down the seats there’s an incredible amount of space back there.

[@dynamodbld4814]

Randy, on the AC, possible freon leak at the compressor seal. Try some freon dye to check it right near the AC Clutch. My fingers are crossed that the left rear trailing arm wheel flopping episode caused the abs fault. Good Luck and keep it coming!!!

[@VMAFIA]

Love videos like these that feature random every day vehicles that most people forget about

[@jackson4228]

I have an 08 Pacifica in good shape with 222k on it, still running strong. You can still get a solid $2000-2500 for them in my area, even with the high miles.

[@J_Twist_nader_alley_gigs]

I bet that is the control arm on the rear. I hope that isn't as big of a bitch to replace like it was on the outlander lol.

[@RickySlatton]

Mine is sitting around 215,000 miles and still going strong. 2007 Chrysler Pacifica 3.8l 4 speed transmission.

[@JerrysEdits]

Dang, My dads got a 07 Pacifica 4.0 or 4.2 6 speed with 120k

[@keatonhartman5470]

We started going to lkq and buying the car jacks and keeping them around for when all the jack stands are already in use

[@fredg2777]

Dont lose the key pretty hard to program keya to these

[@sowers28752]

NADA list it at 3200. KBB List it at 3800. Here in western North Carolina it would be on a lot at no less than 4995.00. So realistically I'd ask 3500.00 and took no less than 3000.00. I think it's a stabilizer bar but not sure

[@Javon1689]

I got a coworker who had a that same Chrysler Pacifica and he traded it in for a Mitsubishi Lancer, also I can't wait to see the collab video

[@ClassicMoparsbyEvtheDodgeMan]

Randy You can get those air Jacks on ebay for around $100.00 dollars each, they save a lot of time, I got two for may shop. and as much as you work on cars and trucks, you will love hem.

[@brandonlewis7611]

My wife had one of these. Motor mounts failed while we were driving. It was a good suv up until that point

[@thevacdude]

I like these, my cousin had a Pacifica years ago. I'd drive one of these. Thanks for the video, Randy.

[@keithhaycraft3765]

I enjoy all of what you do Randy. While I watch a wide variety of videos, yours are my favourite.

[@michaelhuey4187]

Randy, three words: Pull A Part. Pick up an ABS module cheap, problem solved. The AC, is a different story. No lights on the dashboard should add at least another $500 to the selling price.

[@Superior2020]

Check the engine cradle!!

[@nicholas440]

Fun fact, not many around because of subframe rot issues

[@mikedavis5207]

There actually great cars if you take care of them ive seen them get over 300k so you should be alright

[@brennanstabler7124]

I re-watched the walk around video from the other day on this car. Rear suspension was not bent or broken in the video. It is what is it now. Still has good flip potential though! Love your videos Randy, so keep 'em coming.

[@325xitgrocgetter]

They were very popular where I live...and the all wheel drive was popular in snow..but they rusted quickly...you just don't see them around the Twin Cities Metro...aka salt belt central.

[@thecashew8077]

Over the past few years of watching your videos i honestly haven't seen one i really didn't like 👍👍👍

[@jamesdonohue9747]

Forklift damage I’m thinking

[@officialyordan1332]

I never laughed so hard when you kicked the wheel off , that’s how it goes 😂😂😂

[@terrycummings7239]

I agree, I like the flips and older cars.

[@timothygreen9885]

Looks like alot of us agree it is worth $2500 or there abouts. Good job keep the videos coming.

[@mikerawlins4199]

C2200 (ABS Module) is very common on Chrysler in 2007--Fleet management here for a very large city, and we replaced many ABS Modules on Dodge Chargers

[@AutoAuctionRebuilds]

Thank you sir!

[@timothyharrison8953]

Compression link and if that banjo fitting doesn't tighten up, clean off all the brake fluid and see if it's the hose or washers. Replace accordingly.

[@Grandamse1]

So awesome seeing (a teaser) youtubers come together! Also would like to see the flip side of car profits.

[@torythefanman]

My mom has one of these..hate the looks of it but it drives nice. Really enjoying the flip videos!

[@raymondoliver7381]

Reverse bleed the brakes might fix the ABS system

[@anthonyharris7679]

Randy, it was that way when you first looked at it. I noticed it right away. You even mentioned the control arms may be bent and I thought you noticed it as well after that comment.

[@TwentytenS4B8]

Rear lateral control arm is broken. That is a fresh break too, no dirt or corrosion in it. Yup, they broke that shit when they picked it up with the forks. As for the ABS module, those are replaceable. There should be like 6 small bolts holding it on. You can snatch them up at the pick a part for a song.

[@pissedoff8844]

YES Randy AT 28:13 you see the damage to the wheel in the walk around video hopefully its an easy fix for you

[@rantonbro]

put more freon in it with sealer,you can weld bracket on wheel brake save 40 dollars

[@omarbokhari5080]

Randy use a laser pointer for part pointation; just a suggestion Pal

[@aggressivemediocrity]

Randy your not the only one with a channel I watch where vehicles occasionally seem to get damaged by the forklifts. Those guys seem like they are always rushing, which I get, but you figure since after someone purchase the car they would treat it accordingly. As someone's property not some faceless insurance company anymore. No need to crack the bumpers or put holes in the oil pans or snap control arms. I know there's no way to prove it but you figure they would be a bit more gentle with another man's property.

[@neilcoates5418]

I like the variety you're working on for the channel. I'll keep watching!

[@jasonbrown2912]

No worries randy you got this!!!!! Thats an easy fix!!! The fork lifts bend tie rod ends and suspension parts almost to the point that if I accidentally order tie rod ends OR CONTROL ARMS I keep them, ITS THE LOADERS LOL 😆 DEFINITELY

[@bigchungus1225]

1:36 you can thank your local copart forklift operator

[@chickenyt4073]

Cant wait to see on Sunday 🔥🇴🇲♥️

[@iTesla770]

New Pacifica Is Def Better Then Old Just Had To Much Problems

[@charlescanter2628]

It's a sway bar link I think they call it

[@Mud_Dragon]

the wheel bearing would do that or the break leak.

[@danyasha5]

Anyone else think it was funny when Jessica was going to come into the garage and saw he was filming. Lol she backed out so fast like nope! lol

[@jonathantorres8379]

Do you change the oil on the cars before you send it out

[@eliecerosorno6979]

Love all the content Randy! Flip or classic is very informative! Oh and the freeze frame for that abs code was registered at 202,000mi? And the Pacifica is currently at 202k. I have a feeling that happened at the yard. And maybe just maybe the code is related to the leak?? Just my 2 cents.

[@gabekless7259]

I enjoy your videos randy I like both sides the flip side and classic I got my dad to start watching your classic car videos he really enjoys them . I always look forward to seeing the new videos. Thanks so much randy

[@zacharyjones1492]

I never understood why they don't drive the cars that are somewhat drive-able out on there own power... But to me it looks to have been in an accident (as it was rubbing for a long time, your right it was not noticeable in the walk around) leading me to believe it was already probably weak/cracked and the forks finished it off

[@garysimonson9593]

Listening to that Ambassador cranking reminded me - they used Autolite starters from Ford.

[@meganthompson8289]

I like watching you flip the normal cars :)

[@gasolara2002]

I would leave the ABS module alone. It's a common problem with the Jeep Wrangler guys too. There is a counter in it that needs to be reset. A rebuild costs like 200 to 300 bucks which is a hell no when it comes to a flip car that won't bring much money.

[@Oklawolf]

I think you dodged (no pun intended) a bullet on the rear shocks... they look ok to me. Good to get the bare minimum done and get the car out of there ASAP. These will find a way to break your wallet if you let them. I'm five grand into mine in five years. One thing to note on the ABS module - get the battery and tray out of there and inspect the body grounds on the inner fender. These are infamous for issues with those. I had to repair every last one of those on my 2004. You may need an alignment once the rear is fixed.

[@Oklawolf]

Should mention - my 2004 is also loaded. I've had problems with options this one doesn't even have. I'd say it should clear $2500-3000 fixed.

[@KANELY120]

I suggest for you Randy to do for us a copart walk around specially for old cars - the classic - (old school). Because I really love the classic old school. Just search for us 😁some cars in copart yard. I will be very grateful and happy. Regards to you and your coming project's. Best wishes 😎🌹❤️

[@wwz1011]

How often do you get cars damaged by Copart in the loading process? Seems too common.

[@daronvoshel5959]

Yes the suspension damage was there when you shot the first video

[@kodiakradio7510]

Look at the paint on that left quarter panel looks like a respray. Been in an accident.

[@dollarzUS]

Click that like button right now guys

[@connorm955]

Win. Easy fix and it should clean up nicely.

[@mikedavis5207]

A pacifica in pa in perfect condition sells for about 3800 in ruff shape probably 1500 to 2k

[@entropyfan5714]

Definitely forklift; had it happen to me several times. Gas tanks, driveshafts, control arms, etc.

[@waynegouin939]

Hi Randy. Polish the headlights and 2500.

[@tartara3315]

Love those "That's what she said" jokes xD xD keep this up man, great work!

[@Ram14250]

check overhead console for rear hatch switch.

[@curtiscarpenter7423]

Not a bad looking SUV. I like all the videos you put out

[@raymari7658]

Did you check the engine cradle ? Rust through very common. Not a cheap fix.

[@LP_NY]

I had one for 9 years no problems

[@trzam400]

You can swap out the module it unbolts from the pump

[@charlesashlock6025]

It is very obvious that they hit something and snap what looks to be the lower A arm and we're going pretty fast when it happened by the rubbing marks in the wheel well

[@markovwms]

Based on how much rub is in that tire well, it’s been like that

[@trizzlepgrew1505]

Wheel was like that in the walk around video Randy easy fix still Worth it good deal

[@tommyhall350]

Randy what do you use to clean up headlights

[@lesclarke8064]

Great video keep doing what your doing from Liverpool UK

[@Alexscott100]

Can’t wait for Sunday’s video going to be awesome (videos are already awesome but this will be a cool collaboration)

[@Swetrid75]

Look at front subframe, they are always rotted out!

[@Beyer1983]

based solely on the wear on the wheel well plastic paint metal and how the inside of that tire looked i firmly believe it was damage prior to auction because you would have had to have gone many miles to get the tire to wear that much to go through all the plastic, the paint and the metal in the wheel well. glad its not a major issue though

[@KANELY120]

Good deal Randy with buying Chrysler pasifica. I loved the engine which come 4.0L.

[@chrislemaster2695]

IS that 4.0L AMC Jeep Straight 6?

[@sebastianlarcherdebrito6048]

Hey Randy, I’m thinking somewhere around $2500.

[@Funvideohub5]

About how much did they charge u to build the garage ?

[@Jerry-dk8se]

An ABS module from a salvage yard couldn't cost more than $20-$30? But could make several hundred dollars difference in selling price!

[@jrsgarage7211]

Very entertaining Randy!!! Really great job!! Keep up the good work!! ⭐️⭐️⭐️⭐️⭐️

[@jean-marcandjoshua-petsjournal]

Looks like the suspension has been damaged. It hope you can fix it.