Cheap battery Impact Wrench 1/2'' from Lidl 400Nm

Impact wrench 1/2" from lidl Parkside 400Nm
4ah battery
#batteryimpactwrenchlidl
#impactwrench
#parkside
#18v
program do obsługi warsztatu:
e-warsztat24.pl - zniżka 10% na zakup programu Użyj hasła: 4wheelsbydavid
Link do grupy motoryzacyjnej:
www.facebook.c...
link do strony:
/ 4wheels-by-david-10157...
email: [e-mail] Macie pytania??? śmiało można pisać :)

[@ricksivyer7427]

A great video, I was thinking of buying one of these drills, but wasn't sure how good it would be, you have demonstrated how good they are for the money, I will have no problem in buying one now, thank you.

[@4wheelsbyDavid]

you welcome

[@soisun2658]

It's very good. I have it, and it's strong as hell.

[@soisun2658]

I have it and it works great. I bought it not for £60, but for €40, new, including 4 sockets, 1 4ah battery, and charger!

[@4wheelsbyDavid]

well done! regards and welcome to subscribe my channel

[@waqasahmad4245]

Amazing review my man, very thorough. Keep it up!!!!!!

[@4wheelsbyDavid]

thanks Pal

[@ClubTRD]

Thank you for the video.

[@4wheelsbyDavid]

thanks for comment regards and welcome to subscribe my channel

[@florinlepadatu5648]

Very well done! seems like this is way better than the cord version of parkside. For changing wheels is not worth to buy brushless tools like dewalt or makita or milawalkee so I'll give it a try. BTW the cord version is absolutely junk

[@4wheelsbyDavid]

thanks for Your comment and welcome to subscribe my channel

[@alexisamtosta]

Good to know that as I was thinking of getting that one.

[@peter428]

A good Concise vid 👍🏻🇬🇧

[@4wheelsbyDavid]

thanks Pal regards and welcome to subscribe my channel

[@billybarton3258]

Great review I'm buying one after that demo

[@4wheelsbyDavid]

thank you!

[@Toby_the_Glen]

Interesting to note that they can vary in performance?

[@mightymack4259]

No messing about review,cheers 👍

[@4wheelsbyDavid]

thanks

[@alyjan5316]

Yes it's very good and does the job

[@4wheelsbyDavid]

thank you for your comment

[@mountainbearoutdoors]

Great review, Aldi and Lidl do some half decent tools occasionally.

[@4wheelsbyDavid]

yes usually fair price for a tool

[@jamesmoirano4271]

Great review ❤

[@4wheelsbyDavid]

Thank you

[@barriejones15]

Thanks for your efforts, good advice. If you're a pro mechanic, then probably buy a pro tool. Very few of us are, so this will likely serve well enough.

[@4wheelsbyDavid]

Thank you regards David

[@krzysztofbaraniow]

Super potrzebuje odkręcić coś w rowerze

[@4wheelsbyDavid]

może akurat się przyda :) pozdrawiam

[@alzzla2730]

Thanks great explanation

[@4wheelsbyDavid]

thank you Pal

[@roklo]

Thanks for this review!

[@4wheelsbyDavid]

you welcome

[@Toby_the_Glen]

Interesting to compare your video to others, as these wrenches seem to vary hugely in performance?

[@4wheelsbyDavid]

just each test and bolt different 😅

[@chucky2316]

The sockets don't stay on the gun lol 😂.I bought one still have it but you need a pin it's hassle I am going to upgrade

[@4wheelsbyDavid]

cheap price for a tool is not the Dewalt or Milwaukee but does the job

[@chucky2316]

@@4wheelsbyDavid I have the smaller one aswell its brilliant and punches above its weight. The socket not attaching on the bigger one puts me off I noticed you where holding the socket with youre fingers.its just nice too hear that socket click on.

[@arshadmahmood1845]

Informative video

[@4wheelsbyDavid]

thank you, Pal

[@dougiemiller5030]

I find this video strange. I have one. Bought it due to price & reviews. I've used it a few times and I find it's not great. Never been able to remove wheel nuts with it. I've always had to loosen them manually first which kinda defeats the point. Ironically, I've used it to tighten wheel nuts & immediately tried to remove them again - wouldn't do it. It has adjustable torque settings so I used a lesser one to tighten & a stronger one to try to remove. No joy. Don't waste your money tbh. Mine now sits in its case on a shelf.

[@4wheelsbyDavid]

Hi Just You need to remember that is tool for £60 dewalt's battery cost about the same price. So for £60 You getting tool + battery + charger I think is fair price, of course is not strong like a tool for £300😬 but even if you need to loosen the bolt first is better than spin the bolts by hand. regards

[@JJ_ExMachina]

Thanks for the review... Now I am going to go pick one of these up

[@4wheelsbyDavid]

You welcome

[@2alexkom]

Hi. Very good video. My car tyre torque must be 105 NM by driver manual book. So is it OK if i set the wrench for 100 NM?

[@4wheelsbyDavid]

yes but always check manually after works with torque wrench regards

[@richiekaye1103]

Hmm I'm not convinced about this tool I have a draper impact gun and it's three times the price of this one but struggles past 250nm..

[@4wheelsbyDavid]

price is low so I think the best tool for this money, we can't compare it to Dewalt or others which cost 5 times more. Is not strong but does the job.

[@richiekaye1103]

@@4wheelsbyDavid I've just ordered a Kielder Impact gun for £300 it's well over 800nm so thinking this should be tipping into DeWalt territory

[@jcoul1sc]

Buying new batteries and chargers put me off especially when I have makita and ryobi already. thanks

[@4wheelsbyDavid]

yes that right, better is just stay on one brand if You happy. regards and welcome to subscribe my channel

[@del-boysnostalgiatvads7416]

Alright Dave,

[@4wheelsbyDavid]

thanks

[@gunnarliljas8459]

Well done!

[@4wheelsbyDavid]

Thank you

[@DominikChmiel-mp8ch]

Jakie tanie i dobre kliucz kupić

[@4wheelsbyDavid]

DeWalt DCF891 Tani i dobry Pozdrawiam i zapraszam do subskrypcji kanału

[@chucky2316]

You are holding that impact socketb

[@4wheelsbyDavid]

is not that bad 😄

[@richiec164]

Does this impact have 5 levels of torque on a button ?

[@4wheelsbyDavid]

4 levels

[@richiec164]

@@4wheelsbyDavid is it a button function?

[@daveclima5497]

My brother bought two and both of them didn't work LOl

[@4wheelsbyDavid]

😬 happens, just return them regards

[@pabloeskobaro7537]

A ja tam wolę po polsku xd pozdrawiam

[@4wheelsbyDavid]

jest polska wersja na moim kanale pozdrawiam i zapraszam do subskrybcji

[@pg41226]

Is there anyone who’s bought this tool and can give his opinion? :) it’s hard because why would you watch this video after buying, hehe😂

[@4wheelsbyDavid]

yes that right 😅 but not everyone 😅

[@alexisamtosta]

I am thinking of buying one 😁

[@valeryk89x]

You will like it for sure. I also was thinking for a long time of buying one and after did it, I can highly reccomend it!

[@dougiemiller5030]

I have one. Bought it due to price & reviews. I've used it a few times and I find it's not great. Never been able to remove wheel nuts with it. I've always had to loosen them manually first which kinda defeats the point. Ironically, I've used it to tighten wheel nuts & immediately tried to remove them again - wouldn't do it. It has adjustable torque settings so I used a lesser one to tighten & a stronger one to try to remove. No joy. Don't waste your money tbh. Mine now sits in its case on a shelf.

[@muhamedmuslic2534]

I bought one, and it works great for the money 🎉

[@Mr11ESSE111]

Its clumsy and looks like drills with wires

[@4wheelsbyDavid]

thanks for your opinion.

[@bobbyfischer6786]

You know of a less clumsy 400Nm one for 60 quid? No I isn't think so. Post your apology below. Thank you. Great video

[@4wheelsbyDavid]

thanks for your comment ;)

[@Mr11ESSE111]

@@bobbyfischer6786 i know with 800nm (just order it)which are smaller size similar to those of DeWalt and Milwaukee and thst means not clumsy bigg butt drivers which you cannot fitt in confined spaces

[@andredesousa96]

@@Mr11ESSE111whats the model my friend?