Cheap FLAMETROWER upgrade ** INSANE **

FOLLOW ME :
------------------------
TIK TOK:
www.tiktok.com/@misterdionney...
INSTAGRAM:
misterdionn...
-----------------------------------------------
MUSIC CREDIT
------------------------------------------------
Music from #InAudio: inaudio.org/
Track Name. Energetic Gaming Hip-Hop by infraction
Nusic from #InAudio: inaudio.org/
Track Name. Cinematic Action Trailer Epic by infraction

[@hfd6ygf785]

put turbo in lawn mower😂

[@azurtayt1440]

Make this top comment

[@SajonWalker]

Believe it or not, these opposed twin engines, sound amazing when you put a turbo on it. They almost sound like a 12 valve

[@williamcooper2095]

I would love to hear it with a turbo, would be awesome

[@pascalschumacher777]

Jeje and leave the sparkplugs in for antilag xD

[@user-du3ek8hg7t]

Two turbos

[@PorousShark7688]

Here is a idea you can do to get better flames. Find some way to activate the choke while driving. which will then dump more fuel into the engine, causing more flame

[@mrpartridge8765]

I tuned the carb on my moped to do that😂. You need a lean idle and a rich wide open throttle. You'll get some loud pops and flames without sparkplugs.

[@Turbowagon]

Hook up a 12v coil on a switch to the exhaust plugs and have it also kill ignition when you flip it then hold the throttle wide open and hit the switch. Doing it this way you can have a steady flame for a few seconds while you hold it. You can use a relay to ground the ignition kill when it sees 12v signal from your switch.

[@ainzowlgun_darklord7241]

The stickers make it an engine that increases its power ? this is crazy 😂

[@MRPOOPER561]

Nah those stickers tho💀💀💀💀💀💀

[@ainzowlgun_darklord7241]

@@MRPOOPER561 Yes those stickers are something💀💀 Ngl

[@king-car-parking]

turn the air fuel screw on the carburetor somewhere close to the idle screw anb have fun 🔥💥

[@JacobE-23]

I like the vibes, and the work! Subbed

[@Smallenginesgalore]

I agree with @PorousShark7688 in the fact that if you could flip the choke on then that would give you flames. I just bought the same dual carbs as you have on that engine for my modified mower project. Also, there should be some adjustment in your air/fuel mixture on your carburetors. If you richen up your mixture, you will have big flames all of the time (although it will run like garbage and foul out the plugs on your engine) as long as you give it a tiny bit of throttle. My only advice to you is that you should take note of your current adjustments on your carburetors and when you are done shooting flames, then put them back to how they were. The engine that you used in this video looks like the same one as what you swapped into the primer gray lawn mower that you had on the 70 mph mower challenge part two. It also looks like the same engine as what was in your mower that had the hood covered in stickers (now the honda 650 swapped mower) that you were drifting in town in the winter about 1 year ago. Do you just switch the parts between the mowers for the videos or are they all drivable at any time? Not a bad thing, but I was just curious. Thanks for a great video!

[@Officialminibikes]

Love your videos bro literally 💪🏿

[@user-rs1zy2lj6k]

You are awesome man i love mower builds keep it up 🙂🙂🙂

[@LeToon1]

" In today's video we are going to learn how to bump start a lawnmower " 2 minutes later... " In today's video we are going to learn how to push a mower back home " Yep, you're right haha 🤣

[@YonyLeclair7]

Nice video man !! Love it

[@DingleDork-no7gn]

thats some big flames

[@CamperTheFlow]

Pure awesomeness 👍🏼

[@Retr_01]

I completely died when you lost your words and started beatboxing instea 😂

[@vancemacd6315]

Impressive machine. I love string start. Wish they still sold stuff this way.

[@dominiquelavallee745]

Papir pantoute,continue à faire du contenu. 😂❤

[@CarConnoisseur_SS]

The stickers tho💀

[@MisterdionneYT]

don't be suspicious don't be suspicious !!!!!!!

[@CarConnoisseur_SS]

@@MisterdionneYT im not bro i just happened to notice, they look cool bro🥺

[@eurotrucksimulator2645]

+ 30 HP

[@MisterdionneYT]

@@eurotrucksimulator2645 no cap !

[@billy-ee4ei]

​@@CarConnoisseur_SS blud was messing with you LMAO😂😂😂

[@colevenrapgaming7814]

To help with belt slip u can drill 1/8in holes in the sides of the pulley that’s what I did on my mud mower it helped alot

[@jamescraft5300]

thats cool bro

[@david2005dk]

Bro need to make a cop killer lawnmower

[@lukethornton5156]

You make some funny stuff

[@jacksonpayne9917]

Chefs kiss

[@pattyg1902]

By the way if you keep your foot on the throttle when you hit the kill switch it will shoot way bigger flames and be way more efficient because you're keeping the throttle blades open which is dumping way more fuel into the engine which is then getting which thing gets shot out the exhaust which gives you even bigger flames

[@iacopotuttino5515]

Maybe if you hold a bit the throttle you can have bigger flames, in 4 stroke dirt bikes it works

[@jwoody8815]

Kickass.

[@TrevMonsterbeastgame801]

damn flames on the lawnmower

[@molotov5000]

thats insane

[@faxbest1336]

7:38 LOL

[@Duck_man_yt]

"the engine produces unused gas." -MisterDionne but what you need to make better flames is to put the spark plugs down farther so the gas can ignite easier and it ill make it not only look better but sound better

[@Banana_PG3D]

Farmers’ Supra😂😂😂

[@onskuponsku_11eo21]

You are the best youtuber ever

[@amongust69]

w vid

[@probablysomeonesomewhere]

The best transmission to get for these is either a mst 206 or the better one is the peerless 920

[@lowkeydiegoduran4724]

You have to kill the engine spark and full throttle the gas to get the flames you want :)

[@joecompton8142]

3:50 WHOOHOoŒ

[@user-eq5kz8ug3v]

Bro needs a egt gauge now 😭

[@bonqauevieswandra932]

You should try to build a rear engine riding mower

[@jeffarp7409]

I think that you may have your spark plugs mounted a little to deep down in your exhaust tubes. Put them almost at the end of the tubes. That way the unburned fuel gets to mix with fresh oxygen and it will burn better.

[@mihkus]

I put mine right after the exaust port, added some random weedeater coil and it fires after the power stroke, bangs loud and shoots out blue flames. I just turn the iginition off and go downhill last gear, muffler gets red hot

[@HungryHemi48]

Turbo on that bad boy would be sick

[@robot797]

give the exhaust a venturie air intake and it will fire always!!!

[@furiousrage4752]

C serait drôle que tu mettes un petit turbo

[@deputyfuzzball]

YIPPYYY!!!

[@Wheyy_mann]

Ngl if bro is from Canada, he’s most likely from Quebec because of his accent

[@Justin_fourtrax3004x4]

No he is from new brunswick saint quentin

[@MisterdionneYT]

@@Justin_fourtrax3004x4 yup !

[@Justin_fourtrax3004x4]

@@MisterdionneYT koss quer ton nom pi jtavai ecrit un mesage dans let comment aboit commenr faire des bonne flame ben jpeu lexpliquer icit la so prend les deu spark plug wire de lexhaust mes toe une baterie pi conect sa avec une switch pi sa va faire du consteny fireb

[@Lambo_19256YT]

could this also work on a 50CC derbi bike?

[@lukemiarecki5024]

What lawn mower are you using

[@joeydepalmer4457]

This guy MMMMUUUUUSSSSSTTTTTTTTT be from Alberta (with a BC attitude!)

[@the_lilsteve0079]

pence tu q'un turbo pourrai s'installer dessu ?

[@Diesr]

the bogging is due to too much idle fuel its stagnating somewhere in a bend or sum so it sucks too much fuel on idle or complete opposite no fuel at idle

[@picopharade1272]

3:35 maudit beau son ça

[@Go-Maddog-Bass-Boost-fan]

get some dragons breath and put it on the exhaust tip it will have clouded flames

[@Shadi-t4l]

it look fun like real fun

[@Shadi-t4l]

i want one soo bad

[@shadxwed_]

Bro spoke Russian for a moment 😂

[@willisowuor8571]

Take it to a two step

[@joeydepalmer4457]

Would thinner wheels work better?

[@reesemolloy6109]

Are you still going to put that Honda V4 in a mower? I saw it on your TikTok

[@MisterdionneYT]

no the engine is trashed up it was seized ! there was alot of rust inside the engine

[@FaRnorThCrew]

Put the two exhaust together

[@Donavin0]

you have to make it run richer

[@Modified_discover_]

❤❤❤

[@spudstudios3342]

nice, you need to do some work to that crankshaft tho, poor thing is abliterated lol

[@MisterdionneYT]

yeah it is abliterated hahaha

[@cameronschrade1448]

I need a modified mower again..😢

[@Idk_8-z5f]

You should turbo your lawn mower

[@Nelly-ku4zn]

What mower is that pls I’m gonna put a 100cc engine in it it’s going to be my Daly driver

[@yatiiie]

can you make a tutorial on a gas pedal? i am having trouble making one

[@98chevys10ls]

Take a bike brake handle with the cable and hook the end of the cable to the throttle, then weld the brake handle onto your footeest, but adjust it before you weld so you can reach it

[@notabadace239]

Its running lean at idle causing it to shoot more flames and engine braking is holding the rpm up to high for it to run lean

[@shaneanderson3076]

You got the right idea but you have it backwards running lean is not enough fuel. What you mean is running rich when a engine is running rich it is not running efficiently hence causing flames

[@notabadace239]

@@shaneanderson3076 running a engine lean can cause it to lean pop/ misfire running it rich usually makes for more pops on decel/under load but running a hotter plug and running a bit richer would make a great show under load

[@nathanking8915]

Replace flywheel with aluminum or it'll splode. Common issue with those

[@MisterdionneYT]

where can i find parts for these engines tho ?

[@jameydetter8629]

Dude, you should buy my turbo. Craftsman thing will go about 100 mph.

[@Bloxboi82]

I would pay so much money for that thing

[@christiebradford3601]

Yeah so put a turbo in it then this sound sssssssssssssssssssssss comes on

[@1LADA3]

you need to put more gas and you need a rev limiter...

[@fever_dreams4773]

When are you gonna put a motercycle engine in a lawn mower? 😅

[@SatanicViking97]

Would be cool but definitely more fun to try to make a slow motor fast imo lol

[@Abbe-rn1bz]

Honda swaped part 3. Plisssss😢

[@DEADMAN-cg2dx]

smoke stacks

[@Bob-qc2mj]

My lawn mower has 66.6 hp

[@aliefnabeel0459]

Go to a carmeet with it

[@boujee-blago6639]

lets go

[@carguybhh3018]

i know

[@joeydepalmer4457]

Unless you are in a welding contest, WHO CARES if you are a bad welder! I am a bad speller but at least my math is gooder

[@lowkeydiegoduran4724]

What transmission is that?

[@MisterdionneYT]

pearless 6 speeds

[@Dirt-Tomfoolery]

If you like the sound get a harly

[@YonyLeclair7]

Bro tweaking 7:41

[@antino4891]

How did you make the variable speed mower not blow a belt every 100 ft ?

[@MisterdionneYT]

make one of your belts is probably to short so it stretches to much and snaps

[@antino4891]

@@MisterdionneYT The one from the back is the one blowing up every time. But if I get a longer one it will have friction with itself and burn because of the tensionner. What should I do ?

[@Jordon_Fischer]

Ain’t nobody gonna say anything about those stickers lol

[@MisterdionneYT]

better not haha

[@alpi.720]

Salut j'ai une question pourquoi tu parles anglais dans tes vidéos si tu es français ?

[@Thecardaddy]

A mig welder is thousands of dollars

[@Justin_fourtrax3004x4]

Conect tes deu sparkplug a ta betterie pi mes une switch quen tla mes onn sa va tjr faire du feu so sa ba faire des flame pi tchen les au fon ferme le moteur pi ouvre les 👌🏽

[@Speedy15866]

It sounds like a tractor

[@Modified_discover_]

Hello

[@Imgoated45]

7:40

[@Alexcool-b4l]

First gets a car that throws flame and the. Put.it in a mower

[@Noobplayzyt]

why you put the gas pedal on the wrong side

[@user-hs4pe8cw9j]

The clutch is on the right

[@Noobplayzyt]

@@user-hs4pe8cw9j i could never drive like that haha

[@user-hs4pe8cw9j]

@@Noobplayzyt I probably couldn't either but a good amount of mower pedals are on the right

[@anonyme-p8d]

pour neighbors, they should be tired of all your noise. we only a little part but i would like to see all the noise your doing

[@carguybhh3018]

let me buy that for 600 bucks i want it so bad

[@MisterdionneYT]

not for sale buddy haha

[@LVBeatzMusic]

Maybe have no profanity plz. I love your content but I can't watch it around my fam.

[@LVBeatzMusic]

Great tutorial though. I might try on my opposed.....

[@LVBeatzMusic]

Also pull start is very practical

[@MisterdionneYT]

ohhh ! understandable

[@LVBeatzMusic]

@@MisterdionneYT Yeah, if you could maybe bleep them out that'd be great :)

[@MisterdionneYT]

@@LVBeatzMusic i'll just stop the profanity

[@muddycruddymess]

you kinda just threw the secound coil on there, for example its not timed so it might be sparking on intake witch could make less flame then if you had it timed for exaughst stroke

[@muddycruddymess]

what i would recommend to do is take the plugs out and check what stroke the engine is on when the magnet touches the coil