"ONE MANS GARBAGE IS ANOTHER MANS UNGARBAGE" RICKY BUILD A MUDBOOGER DURING THE WINTER BUT THERES ONLY SNOW TO TEST IT
Пікірлер: 105
@tg2963 Жыл бұрын
Naw man there's a whole lot of transmission in that fluid
@firedog5339 Жыл бұрын
It’s like a Slave Lake twin, but classier since it’s got a windshield!
@nicholasbrady3554 Жыл бұрын
Don’t you ever talk about slave lake like that again. This rig a prime machine. But slave lake will fold this girl and the next one that replaces it.
@anthonysiler4938 Жыл бұрын
@@nicholasbrady3554 lol!!
@mr.c8682 Жыл бұрын
"Front diff oil has casually been replaced with ... rain oil" lmao
@jimf1007 Жыл бұрын
I clicked so fast, I thought peg uploaded, u rascal. Still a great vid.
@wreckerjonny6144 Жыл бұрын
Don't forget save those sick dopey dope rims
@collinstiernagle3553 Жыл бұрын
That is the fanciest high-idle stick I've ever seen.
@perplexity6996 Жыл бұрын
not sure why KZbin recommended me this but i love it
@XiamaraTheToxicMu Жыл бұрын
wlcome to the red neck family, i can suggest Zipties and biasplies and mullet break motorsports too. if you like UK content try Lord Muck.
@R.Sole88109 Жыл бұрын
If you like this legend, check out Zip Tie and Bias Plies, and Pathmaker Productions👍🏻
@douglasmayherjr.5733 Жыл бұрын
The old 7.3 sounds good with zoomies. Wonder how many RPM it would spin and live. Thanks for the videos.
@worthshop Жыл бұрын
Looks like fun! I am building an idi race truck for the local circle track. Plan to take it mudding too.
@flatoutnorth794 Жыл бұрын
Missed ya bud. Glad to see the winter didn't get ya down.
@LarryReynolds591 Жыл бұрын
The clutch slave doesn't bolt on, it just clips on. I bled mine while it was off by just ramming the rammy part into the frame of the truck a few times. Then I used a wood clamp to hold the rod back so I could slide it onto the trans
@metalmechanic2938 Жыл бұрын
such a fun truck to mess with! fell in love with the exhaust system😅
@sykostevesfupadventure7 ай бұрын
That trucks in good shape. It would be a daily driver here in ohio usa. The seats not even fucked. But cant wait to see it tear some shit up
@superjonboy873 Жыл бұрын
Great sounding engine actually. I love how these sound like gassers at high RPMs lol!
@benduffin5727 Жыл бұрын
Sawed off pretty much made his own version of slave lake!! That’s fuckin mint!!!
@600wheel Жыл бұрын
Needs chains. If you want to save the rear housing that holds the spider gears for some reason instead of welding the spider gears together fill the gap between the gear teeth that are not touching full of weld, that way they cannot turn. It won’t be as strong as welding the whole thing but you will still at least be able to take it apart and put open gears back in it if you want to
@Brock_Landers Жыл бұрын
"Miled-out"...now I know you've worked in the oilfield. That's an industry term...lmao
@allenroth351 Жыл бұрын
I still don't understand how that idi sounds almost just like my 7.5 460 when you give it the beans... 🤔😆
@westonmandelko2833 Жыл бұрын
Need to get ya a fancy camera mount like Peg so you can spray ether while jumping the starter.
@johnguay1859 Жыл бұрын
Love the clutch is necessary to shift!!
@johnguay1859 Жыл бұрын
Looks fixable( the shifter) Enjoy
@pcwizzy460 Жыл бұрын
There's three TTBs too, that one is Dana 50, half tons are Dana 44, and my F-250 has Dana 44HD.
@davedemo8229 Жыл бұрын
awesome video keep them coming
@600wheel Жыл бұрын
That rear diff needs a 7018 locker
@johnnyappleseed6415 Жыл бұрын
Shoulda left the exhaust shooting straight up... Other than that, top notch, top notch!
@camshaftshaft2711 Жыл бұрын
Love your videos bro 👍😎
@dirttdude Жыл бұрын
i'm not a fajigger expert but cant you hoot your whistler on to the truck so the stovepipe will comingulate the cosby sauce and bunker oiler for cold start high rev and dump chooch?. You can always light a tire on fire and throw it in the back if you require more chooching
@pinkladybikermamma3603 Жыл бұрын
I WOULD HAVE TO AGREE WITH YOU ON THE OIL,
@random_ostrich Жыл бұрын
Weld both front and rear difs 🙏
@R.Sole88109 Жыл бұрын
Good old Lincoln-Miller Locker👍🏻😁
@tonyanderson6493 Жыл бұрын
Nice
@diesellivesmatter Жыл бұрын
Turn truck off, put in reverse, start truck, no clutch needed.
@pcwizzy460 Жыл бұрын
These diffs have a tendency to work the pinion nut loose.
@mountainviewcattle Жыл бұрын
Just found your channel. Cool to see your Dunlops at 12:30, was looking to see if your boots matched the name of your channel lol. Do you ever wear your coveralls over top of your Dunlops? I think they're better worn that way rather than tucking them into the boots. I prefer to have a pant leg over top of my Dunlops.
@RagdollRacingInc Жыл бұрын
Peg would drive it no matter the condition 👌
@jackdaicole7595 Жыл бұрын
Ps this is my only truck I have 8 head of babies and can't afford another vehicle.... I work at a local saw mill and I farm to make enough food for my babies.....I don't have much....
@patrickancona1193 Жыл бұрын
AWESOME!! miss freezing my ass to the deck.... don’t miss the broken sun thing tho
@chestypuller9614 Жыл бұрын
the bottom bolt on what looks like a diff cover but is a ttb beam is your drain hole
@600wheel Жыл бұрын
Yah son lets gooo! Ford for life!
@calebsimth4562 Жыл бұрын
Dude she’s minty 🤙🏻
@hillbillieslive69 Жыл бұрын
My 85 w250 is the same way on the front axle but mine is a Dana 60 straight axle
@Guillotines_For_Globalists Жыл бұрын
How depressing to see such snow in April.
@Brokeandtwistedgarage Жыл бұрын
What a beaut! Hahaha awesome
@srt8madman727 Жыл бұрын
That's something my BorgWarner T500 wouldn't do. Shift without the clutch. I snapped my clutch cable in my 93 fox body and had to start it in 4th gear and limp it home. I could not get that sucker to go into any gear when it was moving.
@BeamerTheFox Жыл бұрын
it can be done but the syncros have to be totally shot lol
@owenscott8317 Жыл бұрын
You don’t hVe to remove balljoints on a superduty 7.3 g To do the u joints either. Not sure about solid axle old Body I’ve never done them
@pcwizzy460 Жыл бұрын
The base model headlights aren't really worth keeping, the chrome grilles and chrome trim headlights are though.
@bosleepsaround Жыл бұрын
Sawed off with the sawed off ace can
@joelchils Жыл бұрын
Got some daves farms vibe going on... just less creepy kid diddler stuff
@captaindipchit Жыл бұрын
Daves farm? Never heard of it, thanks...i take pride in myself in not being a kid diddler
@countryboygrant133 Жыл бұрын
That was fn awesome!!!!!🤘🍻
@jackdaicole7595 Жыл бұрын
I've got a 6.9idi in a 86 it has a tapping noise it tapping when accelerating or idling. Dose t sound like a bottom end knock. Only new injector pump and high pressure lines the injectors look good I do see number 8 leaking from the return side will be fixing that. It has blow by smokes when you open the oil cap. It leaks over night but once started it fires up easily everytime. Anything g else to look for? Could it be a injector is bad? Lifters? Saving to rebuild the 6.9 idi. Slowly buying up parts to do full rebuild.
@1leggeddog Жыл бұрын
incredible
@hfdzl Жыл бұрын
always count on a 7.3 !!
@dennis3513 Жыл бұрын
I am so looking forward to this 😍😂
@jackdaicole7595 Жыл бұрын
My truck is a 1986 f250 4x4 diesel super cab 6.9 idi c6. It's tapping and I'm trying to figure it out?? Any help would greatly be appreciated!
@Clappedoutgarbage Жыл бұрын
Jesus looking pegs property out there, just shitbox ferds everywhere..... having slave lake flashbacks with how beat that thing is
@RagdollRacingInc Жыл бұрын
Give er the beans
@michaelbenoit248 Жыл бұрын
530km=330k miles isn’t bad for a IDI saw one at a junkyard that probably ran great that had 700k on it in a 91 Uhaul truck.
@tripod6406 Жыл бұрын
Why did you buy a prop rod, I would have nicked Pegs spare leg, alot cheaper, Greetings from the UK 🇬🇧
@jerrybockes4769 Жыл бұрын
Those TTB’s are a tough front end, plus they ride better then a solid axle and have more suspension travel. Ur wanting to save the worst part about the truck, the gutless 7.3 idi. In my area we pull them out, scrap them and Cummins swap them. 460 is way better then an idi. I recommend u keep that transmission it’s probably a zf5
@d.j.758 Жыл бұрын
i like those tires, what are they?
@diyspeed Жыл бұрын
a 2x4 is an adjustable rod holder too bud
@rumblesspeedshop-inrustwet1061 Жыл бұрын
What would peg say? You don’t need a clutch lol
@600wheel Жыл бұрын
You paid 1200 bucks for that man I remember when 500 bucks used to buy you something you could drive but for 1200 bucks come to the coast you could’ve bought a truck like that you could drive home. In 08/09 I bought an absolutely perfect mint 5 L fox body the only drawback was it had an automatic and I proceeded to blow that up and make it a stick shift car now it’s fully built with a TKO and a blower so I think I win Edit, I stand corrected you could have driven that thing home if you wanted to…badly
@jakefitzpatrick8550 Жыл бұрын
Need to drive it to wasteland weekend
@captaindipchit Жыл бұрын
Agreed...but needs a station wagon body mounted on it first
@jakefitzpatrick8550 Жыл бұрын
@@captaindipchit heck yes
@allenroth351 Жыл бұрын
That's only 326,000 miles.. not bad..😅
@pcwizzy460 Жыл бұрын
Supercabs are superior, and so are EFI 460s.
@DusterNutbar Жыл бұрын
Niceeee
@fishnfreak04 Жыл бұрын
What kind of tires are those
@mikebondon8494 Жыл бұрын
Those wheels are mint😅
@nate0901 Жыл бұрын
should convince peg (not that should take to much) to revive slave lake and have a hill billy off between yous too
@Atlanticsoutheasthillbilly Жыл бұрын
Ima be honest I got myself an old bump and stroke and I did everything except fix the leak on mine
@tubewaldo Жыл бұрын
Do you know if slave-lake has givin up the ghost? or still runnung?
@petegrant7496 Жыл бұрын
I'd take the ttb any day over gm ifs of the era
@ardennielsen3761 Жыл бұрын
make the car i have do truck things... broke an axle, but how to fix it? hmm...
@oldcarnocar Жыл бұрын
fk'r sounds mint!
@BeamerTheFox Жыл бұрын
i was wondering why it was grinding like an indian tractor trans lol what a mean motor, cant wait to see it do work in a mud whole :P
@elroyelblander6277 Жыл бұрын
👍👍🍻👊
@kalh.9241 Жыл бұрын
Slave lakes cousin ? 🤔🤔🤔
@yungBitta291 Жыл бұрын
Need to sell it to zip tie and bias plies ole pegleg
@thewilliamss2392 Жыл бұрын
U don't need a prop for the brakes just use pegs leg looool
@joshuarussell7546 Жыл бұрын
So slave lake number 2 peg don’t post it anymore 😂 prob took her to the dump
@2ndspingarage Жыл бұрын
That 7.3 is just singing
@noelramirez1664 Жыл бұрын
What size tires
@captaindipchit Жыл бұрын
Military 9x 16
@bhyknut5966 Жыл бұрын
Is this zip tie and pie plays wannabe... I don't know ?.. why am I thinking that?
@michigan102 Жыл бұрын
Part 2?
@600wheel Жыл бұрын
Dude drill a hole in the bottom of the housing let it drain tap the hole and shove a plug in it how hard is that. Come on frogs aren’t that stupid😂😂
@mjlmbl Жыл бұрын
Nothings wrong... it just fell apart.😂
@wtmf80 Жыл бұрын
You don't need a clutch lol
@pcwizzy460 Жыл бұрын
Those IDIs ain't worth saving, swap in an EFI 460, 35w, 12 valve Cummins, or a Powerstroke.