Cheap screen printing press review

[@outkast187]

"Printer has paid for itself 100x over, in my opinion...its not worth it". You cant fix stupid.

[@solekefs626]

Iv been screen printing for years and got one for 1 colours. Having experience allows me to do multiple coloured jobs on it if I have to. Experience is big when it comes to these cheap presses

[@arsimzeneli8943]

i have the same from amazon , 4 heads 4 bases. works perfectly , the bracket underneath is wide so you can do fine tuning to match colours !

[@RJGonzalez40]

You have it setup upside down. The springs go close to the screen holder. The tensor goes in inverted from the other, the fish hook gets inserted away from the other.

[@kylehall4923]

Robert Gonzalez yup 100%

[@shawnk8685]

lol scrolled too far down to find this.

[@TheGhostchaser8]

I just put one of these printers together last night. I simply put the turnbuckles on the turntable side, and the springs towards the screen. Simple fix. They stay down fine.

[@albertjohnson7715]

Take one of the springs from each arm. Just use one spring and it won't pop up. I had the same problem that was my solution.

[@hebrewabraham2751]

I only used one as well

[@Gottzilla47]

Don't give up on it that easy, I have the exact same one,all u have to do is adjust the turnbuckles (ON BOTH SIDE/ SOMETIMES SIMULTANEOUSLY)..... try with a screen in it and without.

[@sleeevless]

ya bro its not the press its you not knowing how to set it up.. i have the same one and it works perfect..

[@outkast187]

Intelligence and common sense goes a long way.

[@rochellegrennan6510]

I agree randy mine work. Fine...lmao he can litteraly add 4 chainrings to that amd have em be lined up fine

[@dustinsunny2405]

Hey Thomas, to fix the issue you have @7:50, flip the set up put the spring at the top where the screen slide in and that way you will have clearance at the bottom. Hope that helps

[@PacoA-x6c]

That's what I did in mine,I flipped the springs to where the frame is, not in the side of the shaft.

[@FIGHT101TV]

I got both of these plus 4 inks and 5 screens for $220! So far works good on runs!

[@instakit-diko6471]

Hi! How to buy and where? Thanks a lot.

[@FIGHT101TV]

@@instakit-diko6471 Go look on offer up..fb or 5 miles

[@instakit-diko6471]

@@FIGHT101TV thanks😊

[@jeffreycondas2873]

Get a heat press and once your shirt is dry to the touch from your flash unit jus heat press them...They will be cured with plastisol inks...May help you save some time

[@riganyanga2526]

Those screen printing is very good for people who just getting started nothing come easy you have to start somewhere

[@christerlangley3146]

Hey! ThomasDaniel change the springs to the opposite side, IE un attach them and put the springs where the screens get attached. Might work a it better..

[@christerlangley3146]

Let me know, [e-mail] cause I am trying to get started and have a similar one but mine doesnt have the springs it uses magnets. I picked up a bundle from a guy for 350. but am not started yet. working on a conveyor dryer diy build first..

[@Greywolfgrafix]

I built my own single color press and four-color press.

[@TheMikePopeShow]

Me too but I had to take it down because it was taking up too much space and I expanded to HTV

[@nelmannamlen]

I think you have the springs upside down i watch someone else video and they actually set it up on camera and put the springs on the other way. you almost changed my mind .... good video though you should do an update video with it switched

[@nherbolario91]

Did you have to assemble any wiring inside the flash or did it work and heat up right away after plugging it in?

[@FASHIONALARMMODE]

They all got level for me. Just do some adjustment and tighten up the springs

[@sainhadam1478]

Dude just turn your spring hooks so they're on opposite sides of the eyelet. I had the same one and that was my fix for this issue. No offense, but are you really mechanically inclined? So many people have the same complaint about this issue I resolved it on the first go. What's the deal?

[@thomasdaniellife9360]

I tried everything with that press, I no longer have that press, I have another one now and I have no issues

[@autumnkhattar3492]

Thanks so much for your honest opinions, I’m watching your video with my business partner and we have fallen in love with your sincerity. You have helped us figure out what the $&??? To do with this half working equipment that we ordered (exactly what you did!). So just a shout out to you for being there for us! Keep up the good work and stay true to you- we can feel the positive vibes and kindness all the way from San Francisco, California...

[@thomasdaniellife9360]

What kind of video do you want to see next?

[@edzoedzo369]

His opinion is false, he didn't assemble it properly!

[@mereyrod4]

You need to inver the spring and turn buckle. The spring goes on the bracket, turn buckle on base.

[@mereyrod4]

*invert

[@arsimzeneli8943]

I just checked mine and compared , dude put the springs on the upper arm annd you wont have problem with head staying down !

[@Grognarthebarb]

My tabs were all similar enough sized to not need it. But you need to set bearings based on the smallest tab. Then file the big ones down with a cheapo file till they barely fit

[@yellaboidre9905]

Works perfect for me...

[@Grognarthebarb]

Works good for me. You have to make the bearings tight yourself. There is a process to getting them ligned up.

[@PartyFoulProductionsLLC]

totally agree with you iBought the same stuff

[@randyjimerson9071]

I have the same exact ones and I can only do 2 colors too

[@JohnJohnson-kk8kt]

The springs and turnbuckle are backwards. If you swap them they turnbuckles won’t hit and tour problem should be solved.

[@ashleycuellar7203]

Outstanding!

[@06dtrejo]

I bought the same flash dryer, but it came without any instructions. What am I supposed to set the numbers on the left to get it to work?

[@thomasdaniellife9360]

I am a little confused what you mean?

[@r.b.d.3068]

its you dude not the printer

[@devensharma305]

Ye. And that's what she said too.😂

[@ezequiellopez4634]

I just got mine but its not heating up do you have the same problems?

[@thomasdaniellife9360]

check the fuse on the back, were the power button is

[@helamantait9419]

" I am extremely mechanically inclined... I don't know what this is called." Turn buckle. That's a turn buckle dude.

[@Wingsnthings23]

Being mechanically inclined has nothing to do with knowing names of things. I've been a locksmith for 25 years so you can say I'm as mechanically inclined as anyone. But just getting into screen printing, don't know the names

[@justjoe915]

if anyone watching this I made a video showing how I set up my press to make all 4 arms lay flat. I'm still learning how to print but I got that part

[@jayp6945]

I started the same way..I had a shocker 4 color 4 station press from NeverTheLess ScreenPrinting, never could get it right, sold it on craigslist. Pain in the ass. Great video brother!

[@thomasdaniellife9360]

Do you have a KZbin channel

[@jayp6945]

@@thomasdaniellife9360 yes. Just click on my picture

[@thomasdaniellife9360]

I Subscribe to your channel

[@dennistallman1601]

what screen printer machine do u recommen ?

[@thomasdaniellife9360]

Take a look at my other press video kzbin.info/www/bejne/o4rIqWeLq7BrpbM

[@Pressplayco]

I have the same flash dryer. I have a problem, i connect it to an outlet connected to the wall, after bout 8 to 10 minutes the outlet automatically turns off . How do I fix that problem

[@thomasdaniellife9360]

You need to check to flash and see what the amp is and change the braker

[@Pressplayco]

The amp for the flash is 2000w voltage 110v/60hz and the type for my breaker box is 120/240 volts

[@thomasdaniellife9360]

Check the amps

[@Userword00]

how did you remove the styrofoam sheet that comes in the coils of the flash dryer?

[@thomasdaniellife9360]

You would have to send me a Picture of it. Send it to [e-mail]

[@outkast187]

Turn it on.

[@champstylebeats2628]

How long does it take to cure your ink

[@thomasdaniellife9360]

Depending on how far away it is from the garment, 12 to 18 Seconds

[@champstylebeats2628]

Ok appreciate it

[@ChiraqVet]

How does the temperature control work on the dryer

[@thomasdaniellife9360]

There is no temperature control on this flash dryer

[@iglesiaelrenuevo5882]

Hi. I buy the same Flash Dryer but is come in whith 220V / 50Hz what can i do

[@thomasdaniellife9360]

Use the plug that your dryer uses.

[@iglesiaelrenuevo5882]

you chenge the plug when you buy the flash dryer

[@thomasdaniellife9360]

Ministerios El Renuevo Del Altisimo no mine is a 120v

[@iglesiaelrenuevo5882]

ok thank toy

[@iglesiaelrenuevo5882]

were you buy

[@yourunclesam6780]

Great tips.Thank you

[@CrewMusictv617]

Can you get to the point I’m getting not interested in this video

[@thomasdaniellife9360]

Sorry that im rambling, I'm still new at this.

[@chrisgrantham1]

Nahh man you did good, don’t worry to much about this guys complaining. Very educational video

[@Joe-qp3uv]

I hope you read this your Springs go in front you have it backwards reverse them

[@thomasdaniellife9360]

I no longer have the press

[@hebrewabraham2751]

i PUT MINES TOGETHER BY MYSELF WITH NO PROBLEMS

[@danfeliciano570]

Thanks for the the review.

[@AlphaGaming77744]

Thanks for the video.....not sure why i was imagining i was getting a great advice from deadpool (Ryan Reynolds) lol. Sorry, no offense....

[@lfecustom9474]

I have the same screen printing Machine and i manage to get all 4 arms to stay down. the only issue i am having is setting up that gap that is needed from the screen to the T-shirt palette when screening. it supposed to be the gap of a quarter but for some reason, i can't adjust that. if you know how to please do a video about that. thank you!

[@positivehxcgo]

Jeovanny Estrella Head over to your local big box home repair store (I have Lowe’s and Home Depot). Get ourself a 18x24 piece of 1/16 plexiglass. Lay that on your pallet, level your screen to the plexi. Problem should be solved.

[@Gottzilla47]

Put a little piece of cart board under the screen for your off contact

[@zensay315]

Jeovanny Estrella you adjust it by bolt where you insert your frames. Loosen it and push it down or adjust where your screen and board are good enough for you. I was baffled when I realize who simple it was to adjust.

[@avancerartgroup1614]

@@zensay315 exaaaactly what I did

[@nievesnasif]

hello Jeovanny I wanted to ask you how you made your arms stay down ... I do not know where I should adjust or misadjust ... Would you be so kind as to send me a picture of the octopus or tell me how? I feel sorry for my English.... Thank you very much!

[@riganyanga2526]

But what I can see from how you setup your press is wrong way

[@stuartnicol1947]

Mate I just got this press your sprongs need to be on the top

[@lcjthomas]

I am having the same issues.

[@mulaajay4373]

I have the same problem! Two of my screens wont stay down. Can someone help me?

[@kylehall4923]

jakeema funches flip the spring so the turn buckle is to the base not the screen holder

[@animal1064]

Turn the springs the other way....um.....

[@baoliao9026]

very bad and cheap quality machine, dont buy it

[@etikwijayanti1583]

I like, i am from screen printing indonesia

[@activeenglishlecreusot9628]

Demo would have been useful.

[@toddmazerolle5802]

Umm

[@tarverharris1]

Todd Mazerolle and UMM 100x over!!

[@frankcruz418]

Um....um.....um.......um......um...um.....um.............UM.

[@fivlines2209]

I am the 69 sub lol

[@thomasdaniellife9360]

Thank you, I will give you a shout out on my next video

[@fivlines2209]

ThomasDaniel Life thank you

[@MsCyclemom]

I wish you would talk clearly and stop saying aww aww

[@cavemanjase]

Umm..

[@angban9661]

I said to myself... One more F'ing "Um" from this dude and, "Um" he is done. 20 secs later and like 10 "Um" I am "Um" annoyed as fuck. And, "Um" "Um, Um Um , Um, Um. Bye

[@bendavis9253]

Um ×100000

[@Greywolfgrafix]

Best to avoid the Chinese-made crap on Amazon.

[@edzoedzo369]

I🤣😂🤣it is so obvious, it's sad that u can't see the mistake u have made, play logo more often to develop necessary mental skills, apparently it helps develop cognitive abilities 🤔😂😂😂

[@carmenperez-gc9dd]

You talk to much

[@thomasdaniellife9360]

That’s kind of the point