Cheap vs Expensive Filament Differences - Which to Choose?

  Рет қаралды 4,138

3D Print Dood

3D Print Dood

Күн бұрын

Пікірлер: 12
The 5 Filament Types You Need to Know (And What They're Good For)
17:28
The 5 Filament Types You Need to Know (And What They're Good For)
The Next Layer
Рет қаралды 868 М.
$2 Aliexpress Knock-Off better than Original?
14:55
$2 Aliexpress Knock-Off better than Original?
CNC Kitchen
Рет қаралды 448 М.
“Don’t stop the chances.”
00:44
“Don’t stop the chances.”
ISSEI / いっせい
Рет қаралды 62 МЛН
小丑教训坏蛋 #小丑 #天使 #shorts
00:49
小丑教训坏蛋 #小丑 #天使 #shorts
好人小丑
Рет қаралды 54 МЛН
😯 Подарила сыну БМВ, но не ожидала такой реакции на машину! | Новостничок
00:20
😯 Подарила сыну БМВ, но не ожидала такой реакции на машину! | Новостничок
НОВОСТНИЧОК
Рет қаралды 6 МЛН
伪装成一棵树整蛊妹妹，结果妹妹当场怀疑人生竟要揍我？【两只马儿-恶搞姐妹】
00:57
伪装成一棵树整蛊妹妹，结果妹妹当场怀疑人生竟要揍我？【两只马儿-恶搞姐妹】
两只马儿—恶搞姐妹
Рет қаралды 44 МЛН
Turning 3D Print Waste into New Filament!
12:48
Turning 3D Print Waste into New Filament!
CNC Kitchen
Рет қаралды 2 МЛН
15+ 3D Printing Tools You Definitely Need
19:08
15+ 3D Printing Tools You Definitely Need
The Next Layer
Рет қаралды 170 М.
Is Cheap 3D Filament Bad?
13:43
Is Cheap 3D Filament Bad?
Craftknights
Рет қаралды 42 М.
Do you really need to dry your filament?
13:35
Do you really need to dry your filament?
Made with Layers (Thomas Sanladerer)
Рет қаралды 683 М.
What is the best PETG filament? 10 different PETG brands tested
13:52
What is the best PETG filament? 10 different PETG brands tested
My Tech Fun
Рет қаралды 36 М.
I had ASA Poisoning! 25 IMPORTANT Filament Answers!
27:26
I had ASA Poisoning! 25 IMPORTANT Filament Answers!
Loyal Moses
Рет қаралды 324 М.
PLA vs PETG: What Filament Should You Use?
12:16
PLA vs PETG: What Filament Should You Use?
Designs By Brodhead
Рет қаралды 19 М.
The Cheapest Filament on the Internet (but what's the catch?)
12:17
The Cheapest Filament on the Internet (but what's the catch?)
Patrick Gibney
Рет қаралды 10 М.
Banish Bambu A1 Purge Waste with these 5 Tips.
8:34
Banish Bambu A1 Purge Waste with these 5 Tips.
stlDenise3D
Рет қаралды 325 М.
I've Tried 200+ Filaments. These 20 Are The Nicest.
13:28
I've Tried 200+ Filaments. These 20 Are The Nicest.
The Next Layer
Рет қаралды 98 М.
“Don’t stop the chances.”
00:44
“Don’t stop the chances.”
ISSEI / いっせい
Рет қаралды 62 МЛН