Figured I’d put this together since we haven’t been messing with the truck lately! But a new update is coming next week!
@curtiscamaro59265 жыл бұрын
Soon it will be time to go back to Summit for a set of 275 28s. The Truck should Run 7.60s in the eighth.
@spraym885 жыл бұрын
Truck sounds good as hell💪🏼💪🏼💪🏼
@robertsheets85945 жыл бұрын
Jmalcom2004 what rearend are you using? I have a 1990 step side with a built 355, built 700R4 and a 410 gear with an auburn carrier. I’m looking to build an s10 to save around 850lbs curious to know what rear end your using and how it’s holding up.
@Jmalcom20045 жыл бұрын
Curtis Mavis Huff going to get the radials next week or the week after!
@Jmalcom20045 жыл бұрын
spraym 88 thanks bro
@gkellz33605 жыл бұрын
Everyone please give this a like. This truck has come a long way and jmalcolm has put a lot of work into it
@Jmalcom20045 жыл бұрын
G Kellz yes it has and I really appreciate the comment. Thanks
@mr.404atl25 жыл бұрын
Sounds good and healthy on a shoestring Budget showing how it’s done!
@gtgodbear63205 жыл бұрын
I was thinking about going back to Old School and build a carbureted 350 S10. Those stock wheel burnouts were hilarious.
@alisaculley6034 жыл бұрын
Awesome truck! I loved the reflective tape on the back lol. I have been looking for that exact truck to put a small block in! Great job on it!
@loganperry83482 жыл бұрын
This is the best 350 s10 video I’ve seen on KZbin
@robertedwards76323 жыл бұрын
Put thousand miles on that truck in two blocks glad to see two wheel peel one tire fryer had to go sounds good for budget 350 just the way real world folks like it keep it real!
@C.dieslevonankwek74 жыл бұрын
Every time it comes out the shop it looks better and better, love it!
@jamesprice21634 жыл бұрын
That truck is beyond badass can't wait to get my hands on a second gen and put a lt1 into it
@gunsandhorsepower3 жыл бұрын
That truck is bad ass cant wait to finish mine
@sircyanthecloutpleaser25247 күн бұрын
God a small block always sounds like heaven
@KingJT802 жыл бұрын
throwback!!! so what you think cheapskate or browncoat?
@jacksonthebarker2339 Жыл бұрын
sounds great! What is done to the motor im building a 84 s10 with a 350
@Folsomfamracing5 жыл бұрын
Did this truck ever make a pass I love it!
@lmhandyman95385 жыл бұрын
Wow I have a 93 s10 thinking about swapping one of these in there How much did you spend. If you don’t mind me asking
@XxBuzzedGamingxX5 жыл бұрын
I want to know as well.
@Dfm2534 жыл бұрын
It can be done pretty cheap if you currently have a 4.3. The motor mounts and transmission bolt right up if I’m not mistaken, the trans won’t last long though.
@dr.lyleevans69154 жыл бұрын
Daniel Martin I have one, but I think it was originally a 2.8 5-speed. How much of a problem would it be to swap in a 4.8/5.3/5.7/6.0 LS/Vortec in it? I plan on buying the motor/transmission combo out of a wrecked model (Silverado, Tahoe, maybe Vette/Camaro if I get lucky)
@scottl14754 жыл бұрын
Dr. Lyle Evans I want to know this as well,just like a ball park number as I have the same motor as you
@LsBluu3 жыл бұрын
Rowdy truck! Check out some of the tire smelting I've done with mine.
@desalvothedon2 жыл бұрын
What was making it so loud in the beginning? It sounds awesome
@supersportrsz285 жыл бұрын
Awesome, been waitin on this one!
@555557113 жыл бұрын
nice makes me wish i keep my s10 they had bad original motors lol im sure if you look around you could find one for cheap
@theoriginaljimmykicker Жыл бұрын
Bad? As in not good? The Iron Duke was one of the best 4cyl engines GM ever made. That's how it earned that name. Bulletproof. I have had 2.8 V6 trucks too that I beat on relentlessly for years in food service delivery that showed great reliability. The 4.3L is a 350 with two cylinders cut off. To say a 4.3 is a "bad" motor is ridiculous. That's like saying a Chevy small balck is a bad motor. Perfect engines? Heck no, but you still see quite a few running the roads today in original form, and they haven't made a truck in the original style in 30 years.
@kylescottjohnston4 жыл бұрын
Gotta slam that door😁 iknow the feeling
@midnightrider4ever3 жыл бұрын
I'm building a truck similar to this. Just got it moving on its own today actually. Your video has me thinking about beefing up s few things. Lol
@lewisdeclouette63425 жыл бұрын
yes sir that's the kind of testing I'm talkin about mini trans brake
@taksistheft76304 жыл бұрын
That thing looks like so much fun!
@tylerstacy5901 Жыл бұрын
Can you still run factory ac with a 350
@bloodblk35802 жыл бұрын
Wats all been done to this motor?
@dxracing992 жыл бұрын
Old School baby! 🔥😎
@johndustin1584 жыл бұрын
What kind of exhaust is on it? An is that original trans an rearend?
@curtisprice39035 жыл бұрын
Strong motor now you need a locker
@Jmalcom20045 жыл бұрын
Curtis Price got one! Check the latest updates!
@CSXT82503 жыл бұрын
No less fun than a Chevelle, Nova, or Camaro. Why TF not?
@blackvan844 жыл бұрын
did you use the stock gas tank .my 93 has a eletric one in the tank.my 383 chevy running a 850 carb
@LOgden-mb2hz3 жыл бұрын
It has a fuel cell in the back of the truck
@amgcarsalonllc5 жыл бұрын
Do u have a full posi or limted slip? U got it running good for what you put in it💪💪
@freshbutplain11445 жыл бұрын
You can see the mans white teeth through the windshield as he is smiling pulling back in after the first tire burn.!
@arnekajohnson65484 жыл бұрын
👍🏿Hot truck bro! When you gon drop it lower to the ground?
@calebedwards70935 жыл бұрын
What all was done to this 350 and whats behind it?
@glennmanchester15683 жыл бұрын
When's the 8.8 posi going in
@smitty45425 жыл бұрын
Dude this is an old video. I wanna see a new vid on the truck. And damn Richard disher!!!!
@Jmalcom20045 жыл бұрын
Smitty 454 😂😂
@miguelleon333 жыл бұрын
Jmalcom2004 how much would it cost to do that too my s-10 ?
@davejohnson44724 жыл бұрын
Power brake..thats it..
@Doakes10005 жыл бұрын
Aye cheapskate looking like it's ready main good work UNC get down over there
@2kcasper1245 жыл бұрын
What the part number for that cowl hood?
@martyburgess3415 жыл бұрын
That's what we Aussies would call tire testing not burnouts 😂😂😂
@Jmalcom20045 жыл бұрын
Marty Burgess 😂😂😂 Man I like that. You gave me a new term to use. Shout out to the Aussies lol. I like that
@armcchargues86233 жыл бұрын
Yall must have a big stash of used tires to fry....
@jamieb95564 жыл бұрын
Ha i can do that in my silverado just mash it down back tire spins and hits second it goes side ways lol
@pcdubya2 жыл бұрын
holy cow that's awesome
@blperformance38225 жыл бұрын
When u going to get back on it iam still working on mine
@DeanLouis-vs2gv5 ай бұрын
Ran out of gas or never caught us
@eddierivera89105 жыл бұрын
Good O cheapskate Gettn it Done 💥 💨 💪🏻
@mikemarch54804 жыл бұрын
Flomasters?? 40 or 44??
@SS_Gang7775 жыл бұрын
Get you some tires that's gonna hook and take it to the track J
@Jmalcom20045 жыл бұрын
Gods' Image coming when it warms up but for now, it’s okay time lol
@JumpinPakFlash5 жыл бұрын
just bought an s10 with a 5.0 v8 here in the uk, my first yank cant wait to get it on the road.
@JumpinPakFlash5 жыл бұрын
also want one of those hood cowls from summit but shippings like £800 ha
@marine4lyfe853 жыл бұрын
Have you ever seen a smallblock s-10 in the UK?
@Kayaan_thegreat2 жыл бұрын
Only 350?
@kevinpeck1073 жыл бұрын
Is it standard cause I got a s10 2001
@vynlpoint20743 жыл бұрын
What rear end is it it?
@jdarker3 жыл бұрын
Amazing. I want to do this so much
@ybnalex96283 жыл бұрын
Same here man just picked up my first s10
@drummaboiferguson21444 жыл бұрын
Is da motor stock
@danielacosta23505 жыл бұрын
What's done to it ?
@vicvic34993 жыл бұрын
What all is required to drop a 350 into a 93 with a 2.8
@karlosmccluster76542 жыл бұрын
A trans-adapt s-10 V8 swap kit it comes with everything
@venchuraparnellsr34122 жыл бұрын
What transmission
@DeanLouis-vs2gv5 ай бұрын
Cheapskate? Out ran 40 cops across 4 county's in a 327 powered S10
@peterodriguez64085 жыл бұрын
Damn!...that 66 Chevelle at .37 tho..
@cliffbadazz3185 жыл бұрын
How much horse power you think it’s making??
@blackonefifty5 жыл бұрын
cliffbadazz318 probably putting down somewhere 300 and 400. I remember him saying this isn’t a serious build so I can’t imagine it’s making big numbers. doesn’t take big power to send it with an S dime though 😂
@cliffbadazz3185 жыл бұрын
blackonefifty 300 to 400 hp on stock heads 🤔
@blackonefifty5 жыл бұрын
cliffbadazz318 I was being generous 😂
@robertsheets85945 жыл бұрын
I’m going to say around 360-380hp. It’s sounds like a healthy cam, it’s got vortec heads which flow pretty damn good, I guess it all depends on what compression the bottom end makes with those 64cc heads. I’ve seen 10:5.1 motors with those heads make a little over 400hp at the crank.
@Jmalcom20045 жыл бұрын
cliffbadazz318 prb 300 to the wheels naturally aspirated and it’ll be around 450-470 on nitrous. It’ll be going on the dyno soon. And it doesn’t have stock heads. Heads are aftermarket. Go check out my $5000 budget build playlist and look at all the episodes whenever you have time. I filmed the build from start to finish
@lexthelonewolf18644 жыл бұрын
2:37 scared me!
@powerhouseracin4455 жыл бұрын
I see jmalcom 💪
@1DonJulito5 жыл бұрын
Oh yeah💪🏾💪🏾💪🏾
@thotpocket77284 жыл бұрын
what trans? i haven’t watched any other videos first i came across
@MylesMoncalieri5 жыл бұрын
I thought this came out in 2005 the intro was that bad
@wesleyalloway53935 жыл бұрын
The big monroe GA
@judebuxton7104 жыл бұрын
2:35-2:38 balls?
@vicvic34993 жыл бұрын
GAAAAAAAH DAAMMMMMM
@shayearl23695 жыл бұрын
Seems like it may run when you put a little giggle sauce to it
@Jmalcom20045 жыл бұрын
Shay Earl that’s what I’m hoping. It’s getting installed now
@OLSKOOLKINGZ5 жыл бұрын
Blowing tires off
@Spennyman105 жыл бұрын
BadAss!!!!
@motorman18734 жыл бұрын
Lmao 250 to the wheel!!!!!!. Wtf???
@cfields85074 жыл бұрын
Compared to the 2.5 4 cylinder, or the 2.8 v6, 250whp is ALOT. Especially with no weight over the rear. Me and a couple buddies swapped an S10 in high school, and a totslly stock 350/th350 combo, with a welded rear end, went 14.0 at 100mph.
@kzfire5523 жыл бұрын
Someone needs driving lessons.
@pimpc599cc5 жыл бұрын
Looking good
@17SewerTeeth_The2nd4 жыл бұрын
I want one
@budgetbuildspeed36125 жыл бұрын
Love the truck man just started building my own it's come a long way in the last eight months from the little Vortec V6 it was check it out and tell me what you think almost done with it. Subscribe to my channel always adding new videos every time I add something to the truck only thing I got left now are some better tires and some traction bars. At the moment has a pretty bad well hop from a dig have a 350 with a small cam 410 gears and a mini spool check it out tell me what you think keep up the good videos