Check Atomizer - Atomizer Short - No Atomizer - Atomizer Low -Error Messages Troubleshooting & Fix!

CHECK ATOMIZER - ATOMIZER SHORT - NO ATOMIZER - ATOMIZER LOW. This is a great video for vaping maintenance and education. Anytime one of these messages appears this video will help you resolve it.
We have all gotten them, check atomizer, atomizer short, no atomizer, atomizer low, and it has given us some grief as it holds us back from vaping. This is the most comprehensive video where Dan Hoff from HoneyStick will walk you through step by step how to diagnose and resolve any of these error messages. the video combines explanations with close-ups and How-To when it is needed. Detailed explanations on if the message originates from an issue in your vape or mod battery or if it originates from the tank.
Sometimes the solution is simple like switching to a new coil and sometimes it can involve a more detailed fixing or cleaning procedure. It doesn't matter what type of mod you have this video will show you all the angles on how to get a proper diagnosis and resolution to any of the error messages.
Visit: www.vapehoneys... and shop for dab pens, nectar collectors, or 510 thread batteries with Dan’s discount! Enter HONEY420 to save 25% on your entire purchase!
--
Comment if you have any questions and we will answer them in our next video 😎
Connect with us on Facebook: @Officialvapehoneystick and Instagram: @vapehoneystick. Share your opinion and your love for HoneyStick!
😎 Vape Responsibly and STAY LIFTED! 💨💨💨

[@claysutton223]

You don't even understand how much of a headache you just took away from me. Thank you Sir!!!!!

[@danhoff6890]

@Clay Sutton, appreciate the kind words! and thank you for watching! glad to help.

[@perrycichlidman5818]

Just wasted £80 of DMT 🥲

[@08lazza08]

Love it! It’s always been the coil change for me and then work backwards. 9/10 it’s the bloody coil or a good ole clean

[@onyxodyssey]

Voopoo Argus user, here! Thanks for this info! My spring pin was stuck down! 🙌

[@danhoff6890]

@Onyx Crystal,. Glad to help! thank you for watching, yes Voopoos are notorious for this happening after lots of use/ cheers.

[@ComradeZBunch]

Q-tips worked! Even if you don't visibly see dirt or grime surrounding your connection, I'd recommend still using the Q-tips for a nice clean-up.

[@danhoff6890]

@ComradeZBunch, yes that is very true.

[@Meknassih]

I've had this problem on and off for 2 years and today you helped solving it. Thank you for getting me out of my misery. 😭

[@danhoff6890]

@Meknassih, very glad we could help you! thank you for watching.

[@bdoon51]

You thank you You the dog Boss I cleaned the connection like you recommended and the No Atomizer Check Atomizer message gone. Boss you saved me $50

[@danhoff6890]

@B Doon, awesome, very glad to help! cheers and thanks for watchihg.

[@robbiesvids1069]

I had just changed out my coil and got the message. Too bad I had filled it up all the way with juice before I saw the error message. Had to dump out the oil and clean out the internal connectors like you said and that fixed it for me. Thanks a million!

[@danhoff6890]

@robbiesvids1069, glad we could help! Cheers and thx for watching.

[@sherrykington2613]

I took my vape into the store where I bought it, they put the wrong coil in, I got the right coil it's working great now thank you for this very informative video it saved me from a bad anxiety filled day.

[@danhoff6890]

@sherrykington2613, that awesome very glad we could help!!

[@brittanyarthur3621]

When I get this message… twice now… it’s because something was just a tad too tight. I have a geek vape Zeus aegis. The coils go in the bottom of the tank and when you take that bottom part off- don’t tighten it all the way or it will throw you the “protection atomizer short” error.

[@azrasashima3733]

shouldve led with wiping ur contact pins as its a more widespread issue then in the chip or battery. sometimes the tanks just not making a good connection to the 510 pins and the pin needs to be lowered. this is especially true if ur plagued with ohms too low as well.

[@danhoff6890]

@Azra Sashima, great suggestions!! thank you for watching.

[@somraj____0]

Thanks bro...my vape fell down while charging and it was not working..I was planning to visit a repairing shop but I checked on KZbin to get some clue and I found you...5 time clicking button worked and now i can enjoy my vape again✌️♥️....thank you

[@danhoff6890]

@Somraj634, our pleasure! Very glad we could help you fix your problem!

[@marryjane126985]

This helped so much turned out my coil wasn't turned correctly and didn't fall into the slot inside the tank twisted it into place and my z-tank works amazingly on my geekvape e100

[@danhoff6890]

@maryjane126985, thats Awesome, we are very glad the video got your unit running like a champ! awesome combo byt the way for big clouds! Cheers.

[@Maxchocar]

Faulty coil was the problem for me. If the mod was workin before the coil change then it’s probably the coil for everyone else who’s having similar issues

[@tonyadoty8258]

Changed my coil too that was the issue

[@LJGallien]

Thank you so much before you even say anything about taking the little tiny piece out and wiggling it out I started messing with it and it started to work so thank you

[@danhoff6890]

@SageAmethysst, really glad we could help! thank you for watching!

[@leratokomako8970]

I followed your instructions and my vape is working 💯 thank you

[@danhoff6890]

@leratokomako8970, Really glad to hear we could help! thank you for watching!

[@1matsg]

I found the problem, it was a dirty coil. Thank you for this video.

[@danhoff6890]

@1matsg, awesome! glad we could help!

[@moron1here2]

Thanks bro, I fixed my vape, I didn't smoke for a week!!

[@jujulacora3530]

BROOOO THANK U!!! I did all the steps and the last one worked!!!! Thank u!!!!!

[@danhoff6890]

@jujulacora, Very glad I could help! cheers and thx for watching!

[@richardc7941]

I did what you said and changed the coil and it worked like a charm. Thank you 🎉

[@danhoff6890]

@Richard C, very glad we could help resolve the issue! cheers! & thx for watching.

[@oakashthorn5714]

Great… I’m was the two tiny little screws at the base where you charge it up they became lose barley noticeable but there was some play so a quick tighten with a knife job done…

[@danhoff6890]

@Oak Ash Thorn, thats awesome, glad it helped and thank you for watching!

[@ddubs4387]

thanks mate!! have had the message for days.. wish i knew it was as simple as changing your coil haha, Subscribed

[@danhoff6890]

@DDUBS GAMING, my pleasure, very glad we could help!!

[@mistyhi63]

Thanks dude. It was when I did my coil change. It wasn't screw on properly lol. U Rock!

[@danhoff6890]

@Misty Hi, Glad the video Helped! thank you so much for watching.

[@Namdor2012]

I have a fix....Use a seal (O'Ring or flat O'ring) off an old tank kit to put between mod and tank, they leak out the breather then under the tank in most mods, then into the 510 connection which causes problems and then into the inner casing which kills the mod....

[@danhoff6890]

@Namdor2012, thats a fantastic tip.

[@Fightufcnight]

Fired after cleaning the connectors🤝🏻

[@sethjanssen6637]

I just had to take the battery out thank you didn’t know it even came out till u said that

[@danhoff6890]

@Seth Janssen, Glad the video helped get your vape back in the game! thank you for watching.

[@redrum2612]

Thank you!

[@danhoff6890]

@redrum, our pleasure, thank you for watching!

[@darkzildjianpro]

Watch in 1.25x speed and it's a bit of a better watch 😂

[@firass001]

Oh thank you man it's way much better 😂

[@mynes17]

Thanks bro.. had a mod sitting for a long period of time. Used isopropyl and pressed and cleaned all the pins where the tank goes! Works like a charm

[@danhoff6890]

@kyle mynes, thats awesome! super glad the video could help you get running again and thak you for watching!

[@TheeGreasyGamer]

I was in the same boat, I've been using disposables for over 6 months and my mod has been sitting (and leaking). Alot of cleaning and pushing the pin down to let it bounced back seems to be what worked best

[@elliedean2431]

Thanks my mod works again 😁

[@danhoff6890]

@elliedean2431, Glad to help, thank you for watching!

[@caffo6667]

for the it was the underside of the pod. it had a little screw what made connection to the actual vaping device, howerver, this screw was a little loose. I tightened this thing and was good to go

[@Jeff-tv2qs]

Thanks dude. It was the trip that resolved the problem

[@danhoff6890]

@Jeff-tv2qs, Awesome, glad we could help!

[@cemetery895]

Thanks it was my battery luckily my pod mod has replaceable batteries.

[@danhoff6890]

Cemetery665_TOAO very glad we can help, and with external batteries this is the most common issue.

[@cemetery895]

@@danhoff6890 My old battery also started working after I stopped using for awhile so everything is good.

[@danhoff6890]

@@cemetery895 Perfect, do you are back in business :-)

[@lizanicole8410]

You fixed my vape. Thanks! Faulty coil😂

[@danhoff6890]

@Lizanicole8410, Awesome! Glad we could help!

[@mrorano8633]

Thanks man fixed it with ur help 🙏 👍 😊

[@danhoff6890]

@Mrorano, appreciate the kind words! glad the video helped resolve the issue! cheers,

[@althierandomvideos8195]

many thanks, i got mine fix i just tilt a little in my rda screws and it works

[@danhoff6890]

@Althie Random Videos, So Glad to help! and thank you for watching.

[@usernnaammeepassword9052]

thank you you helped a lot😁❤️

[@danhoff6890]

@usernnaammee Password, glad to help! thank you for watching!

[@user-Jay-C]

my batterys a bit fucked so it only really works above like 50 percent but i got the drag for free so i cant complain, this video was entertaining while watching the ecig charge

[@danhoff6890]

@user-Jay-C, well thank you for watching! if your unit has a replaceable 18650 battery if you swap it, should be good as new. If it has a built in battery component then just enjoy it as it is. You cant beat FREE, lol!

[@MegaRockfever]

I found after heavy inspection that my coil was not touching my atomizer base, so I have to use a Piler and forced it to close shut. Problem solved and MY DRAG MINI survived.

[@danhoff6890]

@MegaRockfever, glad you are up and running again!

[@vasilisanastasiadis839]

Hello, im new into vaping and your video helped a lot ! you got a new subscirbe , i had to change the coil even tho it was new and just placed it , do you know why this happens ?

[@danhoff6890]

@Vasillis Anastansiadis, Hi Thank you for watching, and glad we could help. The most common reasons can be that the coil got hit with too much wattage too fast.... like a car ideally a coil needs to get broken in to heat up and cool down to heat up instantly again, With high watt devices when people first get a coil , they stage it where they start off using it at the minimal reccomended wattage then work their way higher every few inhales...this gets the vapor flowing and allows the tank gaskets to set in properly. Sometimes it can be as simple as a defective coil or in a more complex case that the wattage regulator in the mod is bad and shoots out more wattage than indicated.

[@deanabrown404]

This video is very helpful!! Thank you!! New subscriber here🎉

[@danhoff6890]

@Deana Brown, So glad we could help! and thank you for watching 🙂

[@felypc7325]

I had the same error. After I tried everything suggested in 2 videos I watched I put back the old coil I just took out and all was good. So I determined it was the new coil. I got another new coil and all was good again. Thanks God 😅

[@danhoff6890]

@felypc7325. great to hear that you were able to fix it after some trial and error. ! thx for watching.

[@SameerShaikh-st3pp]

Thank you so much your video was helpful for me 😊

[@danhoff6890]

@Sameer Shaikh, very glad to help, and thank you for watching.

[@robbieorbit3677]

Thanks, I pressed the pin as you suggested and it works. Thanks bro!

[@danhoff6890]

@Robbie Orbit, Glad to help! thx for watching.

[@7beeb2020]

you've been very helpful, thanks

[@danhoff6890]

@Rabia Marashdeh, anytime, glad to help.

[@fragrooster375]

Wtf I restarted the vape, it still didn't work and then I 'accidentally' dropped it and now it works like a charm lmao

[@danhoff6890]

@e'rekt Zorah, looks like it was an internal contact issue, that fixed itself on impact. Thx for watching.

[@fragrooster375]

@@danhoff6890 Works for me! It's still going strong, haha. Thank you for the very informative video, btw! I might not need it now but eventually I'm sure I will

[@danhoff6890]

@@fragrooster375 My Pleasure and glad to help! I did that with a computer once and it is still going too 2 years later.

[@fragrooster375]

@@danhoff6890 Amazing how that works haha. Even more comprehensible and turning it off and on :D

[@belindasutton7814]

This has happened to me a lot! I fixed a pond pump once by slamming it on a rock! It started pumping water😉

[@missurbanxplorer]

Soooooo I ended up taking wire cutters and tightening the tank to the mod so the connectors touch. It worked. 😅

[@danhoff6890]

@missurbanxplorer, thats awesome!!

[@phantom_cards8599]

Thanks man! my spring pin wasnt connecting properly. I just pushed and moved it a little bit and bam! works! still going to replace it since my mod is a couple years old but this will do!

[@danhoff6890]

@Phantom_Cards, really glad I was able to help! thank you for watching!

[@kevinmaniram616]

Screw in the bottom coil before the top spent 20 min to find out the order matters

[@houndunderground1924]

First short atomizer message ever... Cleaned tank and everything, restarted device, changed coil (two new ones), the message is always there. Did all the gentle clicks&clucks you recommend on the mod and the tank (where they meet), but nada. And yes, the message appeared with one coil and remained after I replaced it, sounds like a mod issue right :( r.i.p?

[@danhoff6890]

@Hound Underground, yes seams like a connection issue inside the mod, probably within the chip circuitry, I would see if you can file a warranty claim with the manufacturer, other than that it wsounds like it can be sent off to its final resting place.

[@TomTom-jl9zd]

Just bought a vape and already have this problem…. It is brand new

[@maximeholtzinger3639]

lifesaver video for smokers

[@danhoff6890]

@maxime holtzinger, appreciate it! thank you for watching.

[@haziqehsan]

Thanks bro, u save my life hehe

[@rudymaritz1794]

Thanx bud. Helped alot Great vid

[@danhoff6890]

@Rudy Maritz, very glad to help and thank you for watching+ the kind words! cheers.

[@MAGEDOK]

Thank you 🤩😍 This helped me a lot

[@danhoff6890]

@MAGEDOK, Glad we were able to Help.

[@phsyque9786]

Very helpful. Thanks for the information!

[@danhoff6890]

@Fernanda Merino., My Pleasure and thank you for watching!

[@andreashelledahle6718]

i cant get the whole thing off my vaperesso, i get the tank, and coil out, but the threaded rod is destroyed or something, because it keeps spinning around when i try to take it out. What can i do?

[@danhoff6890]

@andreashelledahle6718, in this case unfortunatley you might just have toi use pliers, to try and get a good grip on the bottom and apply outward pressure as you twist so it catches.

[@andreashelledahle6718]

@@danhoff6890 okay thank you so much, its one of the older versions but it’s sad to lose it because of that you know:), I will try that today or tomorrow and see what happens👍

[@danhoff6890]

@@andreashelledahle6718 Sounds good, fingers crossed for you!

[@kattz753]

Thanks. I can't drive right now due to medical issue. The only vape shop close to me only sells these and VooPoo. All are crap. I have several broken ones here. I knew that it's something stupid with all of them that can fixed. The Aegis X is possibly one of the worst cases of bad engineering that I have ever seen

[@danhoff6890]

@Kattz, Aegis from Geekvape is notorious for connection issues for sure, I personally have had so many of them.

[@Scythaa]

you=shill @@danhoff6890

[@user-mc4di7sp1k]

I just got a new vape mod geek mod S100 I clean the tank then primed coil before vaping got short automizer signal with new battery.still can't set up.please help me get it vaping again

[@iti2620]

I have the fix, don’t buy Geekvape products

[@yesserdzgaming9423]

hi i have tesla cigar punk 86w and none of those worked is there any thine other i could do

[@jodyspower8565]

Thank you 🥰

[@danhoff6890]

@jodyspower8565, glad to help! thank you for watching!

[@teddyjameshemp]

In my experience, Honeystick SubOhm tanks do not work on HoneyStick Batteries. They are the worst battery I have ever come across, Defender, Subohm, whatever. They have a cannabis cup stick battery that works very well, but the Mods they have are all Alibaba specials with 0 support. They also give you a runaround on returns, rather than acknowledge the product is sub par and offer replacements. I WAS a wholesale customer. I have found dealing with some wholesalers is better than others, in this case, I do better with others.

[@jippyabella6382]

what is the problem with my vape when I checked the atomizer?

[@rahulsinha9031]

I have smok nord 4. The display is showing no atomizer constantly from past few days. No buttons are working. The display is stuck at No Atomizer message. Even when the pod is not connected. Waiting for the battery to drain so that the display goes away. Is there a way to do hard reset? It has fixed battery

[@danhoff6890]

@Rahulsinha9031 - I dont know of a hard reset for that model. Probably best to let the battery drain as you thought and see if it resets the frozen Screen.

[@user-gz7oc9bz6c]

So I have a problem with someone who might be able to help me. I replaced my coil twice, and from time to time, I get an air hit. I've tried clearing the puff counter, and that didn't help. I have a morph3 using 0.4 ohm coils Thanks in advance

[@danhoff6890]

@user-gz7oc9bz6c, so if the lights come on and the counter starts and the hit is dry it sounds like a contact issue, the contact issue can be you need to clean where the coil goes into the tank base good and make sure the connection points are solid, or you need the check where the tank screws into the battery to make sure the tank lower 510 contact and the battery are clean and making a good connection. If you take your tank and use it with a buddies battery and it works flawlessly you know you have to check the battery you have, however if it is the same issue with another battery you know if is within the tank contact. Hope it helps Cheers.

[@seasonpathak7000]

I have got an argus pod. Was using it since a year. Had stopped using it for a couple of months and now when I tried to use it, it shows check atomizer. I was using an older coil so maybe it is a coil issue. Anyone got any idea?

[@danhoff6890]

@Seasonpathak7000, most common is a coil replacement or cleaning the connection area in most cases.

[@PalmaCode34]

thank you so much!!

[@danhoff6890]

@Teletubis, Glad we can help! Thank you for watching.!

[@user-qy5ub5sy9i]

O meu veper só ficará check- atomizer, oque eu faço?

[@Oli_wtvr]

Thank u so much u help me a lot

[@danhoff6890]

@olixia podsiadlo, my pleasure! and thank you for watching.

[@dustinplee5067]

I went to the vape shop and bought a new RDA and the it still doesn’t work so now I’m watching this video

[@danhoff6890]

@dustinplee5067, hope it was helpful and your up and running now. Thank you for watching!

[@walt2121]

I vapped a 1.2 coil at 95w without realizing it and the mod stopped recognizing the atomizer. I switched to a different tank and it worked so it's not the mod. I changed the battery and everything but it won't recognize the first tank. It's a geekvape Z btw. I don't have another mod to test it with, I also replaced the coil.

[@danhoff6890]

@Walt, so even with the new coil the tank was not recognized? If so the tank base probably has some conductivity issues, you may try disassembling and cleaning the tank, we have a video on tank cleaning here on the channel. If that doesn’t work you would need to replace the tank base.

[@jtmichaelson]

Nah. See none of that worked and to get to the point of taking it apart is not realistic because every thing I've ever taken apart turns to garbage right away. Just throw it away and go buy a new one - like they're cheap or I'm super rich and it doesn't financially phase me.

[@ChilledPsycho]

I just dont want to waste the 120$ I put into it 💀

[@rhydenegan348]

My 510 connections spring is not going up far enough and i cant fix it

[@danhoff6890]

@rhydengan348, if you cannot put a little spacer in there, then you should call the manufacturer to see if they can help you.

[@balitangpilipinastv6630]

Smok Nord 5 atomizer short, how to fix guys

[@frankcensored1186]

🚨 Q tip and alcohol……nice 🚨

[@Noah-ij2et]

i need a vape with the coils where u put cotton in them where do i buh for like 30 dollars?

[@danhoff6890]

@Noah, are you looking for a dripper mod / RDA? if so, there is several places online that close them out.

[@alexmaine2922]

My drag 1 doesn't recognize Kylin Mpro RTA, but it recognizes Reload s( maybe kylin mpro too big)

[@danhoff6890]

@Alex maine, check the bottom connector pin in the mod battery and & the Kylin, and make sure when you screw them in they are touching. Most of the time your symtoms are caused by a recessed connector pin ewither in the mod or tank. Cheers and hope it helps./

[@alexmaine2922]

@@danhoff6890 So i solved the problem, problem was that pin is too short to touch the connector, so i decided to put a small steel piece between connector and pin, then it worked now my drag recongizes it.

[@danhoff6890]

@@alexmaine2922 Awesome! Glad that worked, I figured the issue had to be there based on the symptoms, thank you for watching!

[@kh.khalequzzamanpapon6032]

you are a goddamn Genius

[@alleypog]

how do i do, pls. help my vape just say battery low! my battery brand new why, and when i open we just say" it short"?😓

[@danhoff6890]

@alleypog, does your mod have replaceable 18650 bateries or is it a "built -in-battery" ?

[@bigdaddyjavie]

It's kinda sad to know that there was people out there who couldn't and probably didn't check everything said in this video. Because they lack the capacity to think of the these possible fixes. Just in case I'm not being clear. They lack common sense.

[@johnram3430]

speed 2.0 thanks me later

[@tomtreacy7700]

Are you able to get add revenue for this video or is it demonetized and or rated as 18+?

[@nightfury1348]

I got this problem my vape was fine I changed the coil let it sit for about 20 minutes then was vaping away for about an hour or 2 then all of a sudden I got this problem could I have a faulty coil ?

[@danhoff6890]

@nightfury1348, yes it could be a faulty coil, also it is best to stage the coil where you kind of break it in before hitting it with any high wattage because then it prolongs the life of the coil... also in rare cases the mode may be exerting more power than it displays.

[@nightfury1348]

@@danhoff6890 it’s all good thank you for your help I changed they coil and it’s back working fine now thank you for your help and taking your time to respond

[@danhoff6890]

@@nightfury1348 Sure thing, Anytime! glad its all good now. Cheers.

[@speedymfrrodriguez1299]

Mine asks “New Coil”? This video doesn’t have this in it I had to adjust the watts 😅dabarooski up

[@danhoff6890]

@speedymyfrodriguez1299, sometimes your mod will wonder if you have a new coil, and want you to run a certain wattage or run a program for it. this is to protect the longevity of the coil. sometimes your mod can give you this message in error.

[@miikkakoskinen366]

my rta fires 10times then just saying ”check atomizer” what i need to do i tight screws

[@danhoff6890]

@mikkakoskinen366, you might be giving it too much power, or when you give it power the Screws and wire go out of place and make a contact issue.

[@miikkakoskinen366]

@@danhoff6890 i do new build and still not working

[@visualdeepmix4960]

i have find something i remove all the screw , clean & that's it zeus x mesh problem short or no coil now fixed

[@danhoff6890]

@Visual Deep Mix. great suggestion!. E juice residue must have gotten into your Mod.

[@visualdeepmix4960]

@@danhoff6890 it do that a lot of time zeus are the best but sometimes still boring 😅

[@visualdeepmix4960]

@@danhoff6890 For my liquid i use only 20 pg 80 vg

[@danhoff6890]

@@visualdeepmix4960 Well that is thicker juice so i can see how it would need to be cleaned more often.

[@visualdeepmix4960]

@@danhoff6890 ok thanks for your answer

[@Serectos]

Still does not work I have hade this problem now for 3 days i have changed the battery,coil and cleaned it still get the Message

[@danhoff6890]

@serectos, if you tried that and still getting issues it must be the base of the tank has a contact or electronic issue.

[@user-jk2qv5kh5b]

I have a Voopoo Doric and I can't take my Doric apart so I cleaned it the best that I could and changed my coil and still nothing oh also I've changed my coil 3 xs and the first 2 coils somehow got broke because I have another tank and tried them in that one and they aren't working so whatever my problem is it's breaking my coils as well so do you have any ideas on what this could be I've even used the pod from my other atomizer and I know its my tank because my other pod that's the same as the one that the Doric has on it isn't working on my Doric either . Please help

[@danhoff6890]

@Kim Baum, it sounds like you have a pretty complex case but you did everything for that Mod to get it running, i think it has a problem with the wattage regulator and it is frying your coils by letting too much thru and masically ruining everything you have on there, I have seen batteries you have turned down to 2 or 3 watts and you hook it up to a Watt tester and it is pumping out 40 watts. Basically if thats happening you have to call the manufacturer or the shop that sold it to you to see if they can swap it or take it apart and replace the circuit board.

[@user-jk2qv5kh5b]

@@danhoff6890 thanks for the feedback I appreciate it so much Thank you

[@danhoff6890]

@@user-jk2qv5kh5b Anytime! Cheers, and thank you for watching.

[@YobboCat]

geek vape error 'atomizer short'. so far there has been no way to fix it. i already tried all the stuff youre banging on about, ie you havent told us anything that i hadnt already worked out via plain old logic .... lol .... any other suggestions?

[@danhoff6890]

@YobboCat, yea the plain logic is all I got lol, if that doesnt work get in touch with the store or the manufacturer and poke at them as it comes down to the specific programing of the device as this is probably an internal error on the motherboard. Rarely if you take the casing of the device apart, you can see the wire going up to the connector detached where the soldering failed giving you that signal.

[@PrinceNinoCabug-lt5bw]

still no coil even in new atomizer ,how to fix

[@danhoff6890]

@princeNinoCabug-It5bw, so in the video I talk about determining if the issue is in the battery or the tank. if you try a different tank and it still is an issue the connector in your mode could be either dirty or not making contact with the tank pin. If you clean this area and still nothing you should call the battery manufacturer and see if they will swap it for you. Hope it helps.

[@tikamyagdile]

NO ATOMIZER HOW TO BYE THIS IN DOHA QATAR CAN YOU HELP ME PLZZZ

[@marionikic4261]

Can u help.me it says no amotizer and ive tried evrything took it all out and put back the same way and nothing happens

[@danhoff6890]

@Marino Nikic, if you tried everything in the video, even took it apart to check for contact issues and it still shows, you need to contact the manufacrturer as the actual circutry / microchip in there is damaged.

[@manjelos]

Thanks, I tried cold reset, battery out 15 Min, turn off and on, nothing worked. After replacing the coil did work again

[@danhoff6890]

@manjelos, Glad you are up and running again!

[@manjelos]

@@danhoff6890 es, well, my Geek Wape felt down couple times last days and even glas broke. Had to replace glas but left the coil, was still good. Day after I got this message. I guess, the coil got somehow short contact

[@Ajdolo2]

Nothing worked , was internal issues … my vape shop (vapor 100) let me swap mine for a new one for free !

[@danhoff6890]

@aljean7157, glad you got to the bottom of it and it was resolved! cheers.

[@PleaseLeaveMeAlone-we9fc]

Fucking hell I tried everything from the start and none worked then I changed the coil and it registered

[@Arianna_Elizabeth]

Okay but when I hit my fire button it just goes to the menu and doesn’t fire anymore

[@danhoff6890]

@girlyghoul999, what model battery do you have?

[@youtubecommenter2527]

What is High Atomizer?

[@danhoff6890]

@youtubecommenter2527, never seen that one before, but could be that it is running too hot and the unit needs time to cool down before you can hit it againl.

[@godwinpasia9382]

How to fix may rx200 reuleaux to atomizer short? I can't fix it 🙂

[@danhoff6890]

@Godwin Pasia, if none of the tips in the video resolved your issue, you should contact Wismec .

[@theonelion]

I have 3 different Wismec mods and they all have this issue. Their 510 connections are horrible. I have a lot of mods from various other brands and have no such problems with any of them. Either it's poor quality control or they just don't care.

[@danhoff6890]

@@theonelion I had the same thing with a Wismec Rezin series. Amazing Mod, great body, texture, buttons. connection failed.

[@theonelion]

@@danhoff6890 I have th RX Gen 3, the RX Gen 3 dual, the Ravage and the Tinker 2. The Tinker 2, a great looking and feeling mod, is the best one out of the bunch and malfunctions the least. However, the mod can look and feel great, have a good chip and function perfectly in every other aspect but if the 510 is faulty, the mod is pretty much useless because it's just not reliable enough to use.

[@danhoff6890]

@@theonelion That is exactly how I felt about my Wismec Resin series.

[@thedanyel0000]

High tem error on innokin sensis?

[@danhoff6890]

@Daniel Pirvulescu, it usually means it is running too long or too strong and the internal batteries are overheating. Might be a time to get some new internals 18650's.

[@paulgibson3343]

I have changed coil twice and still says atomizer low

[@danhoff6890]

@Paul Gibson, it could be a connection issue with your tank to the battery or an issue where you have to clean out the insides of the tanks and the base that the coil connects to. If that doesnt work the mod has internal circuitry problems.

[@bernchyu1181]

None of that worked. I used other batteries other mod, cleaned the tank put new coil, still says atomizer short.

[@danhoff6890]

@Bern Chyu, I would get in touch with the mod manufacturer, it sounds like something wrong with the internal circuitry of the mod.