Checking codes on International

[@user-et5om1ci9u]

Thanks for sharing. Just tried it, and it worked! Took a couple of pictures and emailed them off to our terminal manager and mechanic.

[@GCL61]

Great video thanks for sharing. I have 4 faults that read as such 4:240 639_14P 241:254 639_14P 1:240 639_14P 150: 1 2023_14P

[@jimwhitworth8712]

I have 3 fault codes 150:1 2023_14P; 1: 3 613_ 14A and 5:3 2033_ 14P Check Engine light comes up during start sometimes check AC comes on. Check Engine light has been staying on longer and longer

[@randallmotherfuckeradkison7864]

Well I used the same info you gave and by turning on the left blinker and simultaneously hitting cruise on an the resume up it did clear mine with 13 codes

[@javonjohnson4005]

I have a electrical fault light on also truck and trailer abs lights on, with the following codes SPN: 2011 FMI:9 OC:110 SA:23/SPN:2011 FMI:9 OC:1 SA:33/ SPN:2642 FMI:5 OC:1 SA:33/. SPN:3981 FMI:2 OC:2 SA:33/ SPN: 524285 FMI:14 OC:1 SA:150/ SPN: 520211 FMI:7 OC: 126 SA:58/ SPN:524285 FMI: 14 OC: 1 SA:150; I really need to get my abs working before Inspections and electrical fault would be nice also. Thanks

[@JawSales]

Hi, are you able to help us with the following codes on a 2010 Intl w/ 570 engine : SPN 8146 FMI 2 / SPN 8001 FMI 0 / SPN 7121 FMI 0 / SPN 3251 FMI 4 / SPN 520465 FMI 2 OC 1 SA 33 / SPN 597 FMI 2 OC 2 SA33 / SPN 164 FMI 1 / SPN 520905 FMI 13 OC 1 SA 33 / SPN 520755 FMI 5 OC 1 FMI 33 - It also has a check trans light on

[@luissuarez8096]

boss i have a truck just like yours could you tell me where is the engine brake on the international 2007 automatic transmission thank you

[@wojtekmatus6058]

Got 2017 4300 durastar, the 3 spn codes are 597 oc 126, 1552 oc 24, 2023 oc 126, check engine blinks 4 times after startup then goes off, just bugs me what could be wrong with truck, but it runs fine, thanks

[@josephsmith1132]

Hey my guy I have a 2014 international pro star and I have never noticed the power turn off switch under the fire extinguisher before I will look for it and try what your video showed me to do, I had it cleared once by a guy who had a little devise hooked to his phone some kind of way and it cleared it only to come back later on however I have been running with it on and my readings on my dash are alright the check engine light just stays on not flashing or anything however the triangle symbol shows up flashes a while the also stays lit and it does this often however does not affect the power of the engine or performance what could you suggest to do as I am mechanically inclined to do what i can do before taking it to a shop.

[@whitepeoplergullible9241]

He there thanks for the video, Im looking to get one of these it's a 2009 it starts only after priming it 3 or 4 times. I didn't pull the codes off of it. Have you ever seen that problem before?

[@RaptorVac]

Hey There Have a similar issue with a 09 maxx 10, did hou resolve yours?

[@shanmann6526]

What does the code 9 mean on International Prostar max force 2016 (Automatic)?

[@mrsuccess336]

Can u still help with the codes

[@lancetruong3075]

How can you tell which code was active?

[@ronbthetrucker3985]

I just saw your video about checking codes, I have 2 codes SPN 520981, and SPN 3226. Could u tell me what these are?

[@brianmillsap396]

The reason you can not clear them is because they are ACTIVE codes. The left turn signal and top button procedure will clear them if they are inactive.

[@ninawoody7847]

Hello There I have a 2003 International 4300 tow truck and i have 2 codes 613_14A and 2023_14D. Any hekp would be appreciated. Thanks!

[@pushpinderbhullar6107]

That helps...all I see is Prev Active codes

[@robertjohnson707]

I have a customer that has a 2008 7300 international he was working on the boom cross some wires over and it shut the vehicle down on it I can bypass the starter relay and it will crank but it will not accelerate can you give me any information on what you think might be the problem

[@candinelson7972]

I have a 2017 Lonestar & when I turn the engine on it is showing GI on the display, what does that mean? I tried what is on this video but it’s not telling me anything

[@howardharrisjr4755]

Spn 5357 is a active code on my truck, can you help me with this

[@howardharrisjr4755]

International 4300 cummins engine 2017,, code 5357 is the active code fmi 31 oc 1,,,any suggestions?

[@mannymx51]

Hey man, got a few codes on mine. A/C not working correctly. Replaced both thermistors and high pressure switch with no fix on the A/C. Compressor works, bought the truck with a switch to turn compressor on manually. I just got the codes today but not sure how to read them. No scan tool for me. it shows: 1:4 613_14A and 150:1 2023_14P Thank you

[@ShiftingSkys]

Likely need to charge Unit or take to a dealer to get the "Sticky" Code out of old Modules. Those Low charge faults in older programming can become "Sticky" and will not clear. Even with software. have to Update the BCM

[@ashleyychanel]

Hey do can you still help with codes?

[@Kodiak9292]

It will clear the codes marked with a (p) (past codes) wont clear the A codes (active)

[@Hboushka4]

Hi there, could you help me out with the code my bus is throwing? It's says theres 1 active and 4 total but it's giving me 2. SPN: 1378 OC: 1 Conn:---- FMI: 31 SA: 0 Pin: N/A SPDN:2237 OC: 2 Conn:---- FMII: 9 SA: 33 Pin: N/A It's an International HC/TC 2014 with a Maxxforce Engine

[@johnunderwood8827]

hello wanted to know are you still active helping people with codes?

[@hiawathasmalls73]

👍👍

[@boogump4500]

How do i send a pic of my codes?

[@clydeharper1157]

I have a truck that doesn't shift gears code's are 000612 spn. 14 fmi

[@urielhernandezT150]

I think the codes should be checked on international school buses as well

[@scotttorres3302]

Spn-3984 Fmi-2 Spn- 2237 Fmi 9

[@larryjohnson194]

Please help me know these codes

[@robertjohnson707]

I read codes like you showed in your video we are showing a 639 Dash 14 P 5 98 Dash 14 P 6 25 Dash 14 P 6 12 Dash 14 3639 Dash 14 P 6 13 Dash14

[@littlescod22]

@mechanic 101 I have a 2010 international and I got some codes spn168 fmi 4 can you help thanks

[@ggray1213]

How has your 2010 been as far as reliability?

[@littlescod22]

168 4 means you have an electrical short some where in the system

[@jamesconley3262]

Sa:0 Spn:1209 fmi:2 oc:1

[@8mpgmafia109]

How do you make it go back Sir?

[@cjones582191]

Cycle the key

[@durtlyfe119]

Hi , couldn’t find your email. Check engine light on Active codes 0 Total 8 Codes seen 639 520856 593 597 5319 Any help would be appreciated, thanks Daniel

[@nealcummings1803]

Can you help me with a code,2009 transtar 8600 international Spn 3984 Fmi 2 Oc 5 Sa 33 I would appreciate your help,I can’t quite locate this and it’s turning on the triangle warning light and de-rating my engine

[@juanumana2590]

Hi I hope you can help me I have a 2013 international maxforce 4300 and I had the yellow warn engine light on

[@SmeeUncleJoe]

These codes are rather useless without a website to find out what they mean, no ????

[@larryjohnson194]

Whats your email

[@JCH722]

MaxxForce code=666

[@luissuarez8096]

boss i have a truck just like yours could you tell me where is the engine brake on the international 2007 automatic transmission thank you

[@dthetruckguy1499]

What engine do you have?