Chevron Training - Commission a Solar System

www.chevrontraining.ie/solarbi...

[@martincallaby5214]

excellent,clear and simple,informative-highly recommed,most helpful.

[@hansstofberg43]

Just looked at a different video the only difference was that he used the lower valve as a flow and the top as a return for the anti freeze. I reckon it realy makes no big difference it will work both ways . Thanks for the clear explanation. Just had to fill our system after 8 years the pressure had gone to zero . There where some connections on my system that had sweated over the years you could see the green and black build up on the connections . I guess the installer had not tightened it enough because I could tighten it a bit more . Just got a cheap water pump with a maximum out put of 3 ato and a plastic drum of anti freeze. It worked perfect the pump is silent again

[@viciriuctoader8406]

Ok felicităr

[@markdurnin9384]

What pressure should this system have reading on the clock when you close both filling taps

[@K-carbon]

If your using a proper fill flush pumping unit it could finish up at 4 or 5 bar you den have to release the pressure Generally speaking 2bar and have the expansion vessel 0.3 bar lower than the set pressure 2 bar .Both temperature gauge need to be turns to 45 degrees to fill flush the system and then return them to vertical when finishs this gentleman has did a very poor job of describing how to service fill a solar system

[@knallaff]

.... okey

[@badmadmas]

Please don´t use automatic air vents on solar...

[@K-carbon]

King span solar system never came with an automatic air vent this gentleman doesn't have much knowledge of this systems