Chevy Express 1500 shifter interlock solenoid replace

[@danielgamboa4428]

Thanks got me home after being stuck for 3hrs.. and doing so much research your vidoe was helpful.

[@MM-fh3ml]

Excellent video. If you have no new solenoid, the quick and dirty solution is to remove the 2 wire connector going into the solenoid, this will allow truck to shift out of park without even pressing the brake. KZbin and internet is full of idiots that tell you that truck does not shift from park because of the brake light switch. Hahahaha. The interlock shifter solenoid, that gets replaced in this video, will cause your truck to not shift out of park and leave you stranded somewhere. The only problem I had was removing the solenoid from the bracket holding it. Excellent video.

[@tuscaroradave]

Thank you for the video. Who knew it could be so easy? My Park Avenue has the same problem when cold.

[@TomMack530]

I thank you, I can tell you are Hispanic and that kool I thank you for shearing this video, why I say that is because all the Hispanic videos all speak in there language . So it’s kinda hard to figure out what he is saying ? So thank you very much and god bless 😎

[@Lincolnpipe]

Thank you for the video. Super helpful.

[@67Therapy]

Thanks. This worked for my 07 Silverado.

[@morrofernandez5210]

Thank u man super helpful

[@pxndxlunx5821]

I personally just lowered mind down so it wouldn't interfere with the shifter anymore. Everything is great and only did this since I can not find a new solenoid anywhere for my car which is a 05 Suzuki Aerio.

[@josehernandez1036]

Tank you for this video I fix my van

[@kennyrogers3919]

Good job on the video Amigo! 👍🏻 quite helpful

[@kaylamarie8309]

Awesome video, thanks for posting it.

[@bruceshearer1719]

Thank you,Sir....great help🇨🇦

[@chaskelhorowitz7864]

Your a good men dilers r bad ....

[@icyroadwarrior]

showing taking it off was needed for this vid

[@dannyfubar3099]

Excellent Video, Thank You for Sharing.

[@bobcormier5098]

Good job bud.............dealer shops are total ripp offs

[@SHELLIANBLESSED4LIFE]

Thanks you so much great video

[@terrymarsh8094]

Thanks for sharing I appreciate you!

[@user-ez8nw6ik8e]

My van will work just fine just after passing 55. It would give a few jerks and then it would write smooth. Did this fix your problem too

[@waynewayne8430]

I have a 98 s10 and the part in the video is the same thing that was shipped to me. That same part will work on my s10 as well?

[@micahferguson9295]

Thanks for this video!! That was the problem with my van.

[@freeman368]

Thank you brother

[@Juli-n-David]

Yes they do i.do the same fix it myself too thanks fir video

[@angel447cruzify]

Buen trabajo grasiad

[@googlemall3323]

Thank u amigo🙏🏽

[@daronjones4408]

My guy 👍🏽👍🏽👍🏽

[@georgettecastillion]

Thanks!

[@michaelrowley8831]

Thank you so much

[@MrHRDGAMER]

Was it not going into gears or was the transmission not shifting

[@heberlara6079]

Thank you sir

[@larryeaton9437]

Buenos Dias mi Amigo! Great Video! I'm hoping it helps me! I want to ask you, well let me tell you what's happening with MY 2009 Chevy Silverado and I want to know IF its the SAME PROBLEM you were having with your Van in your video please? When I go to put my truck into gear after starting it, I have always needed to first, pull the gear shifter slightly toward me (I assume to get it out of gear) THEN pull downward to get into the gear I want to be in (Usually D or R). However when I go to pull downward the shifter will not move. I have to sorta "play with it" a little, wiggling the shifter while I pull downward to kinda find that "sweet spot" where the shifter will FINALLY pull down into gear. I too have been to two shops who do not seems to know much without me paying through the nose for a proper diagnosis. I have come to believe it's the very same shit solenoid issue you show in this video. Were YOU having this same problem with your van? Thank you so very much my friend for your video and any help you may kindly lend. Sincerely, Larry in Maryland

[@eddietorres7478]

Thank You

[@javierochoa432]

So if u just unplug it it would shift into gears ??? When I press my brakes it doesn’t let me change gears

[@jordanbowes5707]

no, the solenoid give the transmission permission to change, you'll likely need a new one

[@tomgiorgini9154]

yes just undo the 2 wire connection

[@ajaytn]

Hi. I also need to replace my shift interlock solenoid on my 2001 suburban 1500 but don’t know how to. Would you please tell me how you did it and tools required. I know where it is and have located it. But don’t know the procedure. Thanks in advance.

[@GlassmaN-GaminG]

what was your suburban doing trying to see if this is what is wrong with mine have you got your back up and running

[@jermainerobbins]

Thanks brother

[@ulala6221]

hi i got the 2005 Ford Econoline E250 When i shifted it didn't do nothing Van doesn't move don't you think should i replace that part ? Please help . Thanks

[@isabelle92335]

Did you figure out what it was? Please and thank you

[@alacacfltd1327]

U cud be having a blown fuse for the shifter.check ur fuses.it happened to my 2005 ford explorer too.

[@ddyson3015]

Sounds like your linkage cable on the side of the transmission has a bad bushing

[@totopink1]

I have same problem. Please I need the name or number of the part .

[@RazorFinish]

He sounds like the Diego puppet voice

[@alexzelaya7336]

I ziptight mine temporarily fix

[@jessegarcia5056]

Can it also be a fuse

[@tomgiorgini9154]

yes

[@sernoel64]

Hable español

[@franciscobarrera9424]

No te entiendo piojo