Love customers like that. Every warning light is on, brakes are grinding, mismatched tires are unsafe and battery is bad. They bring it in because the power plug is out and they can't charge their cellphone!
@SouthMainAuto9 жыл бұрын
I literally laughed out loud haha... Glad to know it's not only happening here haha
@zab343446 жыл бұрын
Lmao!!!!
@daveblane64425 жыл бұрын
hahaha LOL
@InsideOfMyOwnMind5 жыл бұрын
Yeah how did they know they could drive it?
@thetinpin5 жыл бұрын
First fix the A/C and the power port, THEN look into the shaking, the white exhaust cloud, and the flashing yellow motor light thing, ok?
@paulpreston95559 жыл бұрын
Thank you for showing all the little details other mechanics leave out in their 3 minute vids on repairs.
@SouthMainAuto9 жыл бұрын
Sure thing!
@brianosowski27289 жыл бұрын
thank you for your help single mom trying to figure out how to fix truck and only money for parts u r amazing
@SouthMainAuto9 жыл бұрын
Brian Osowski Glad it could help
@johnreid8596 жыл бұрын
Getting ready to do this job, thanks for the video Eric! Chevy dealer quoted $624 out the door for this job. I finished the job in about an hour for the cost of the parts. Thanks again.
@conrado59105 жыл бұрын
John Reid. Good job saved alot of money
@nephetula3 жыл бұрын
I would NEVER go to that dealer again! (They are ripoff artists.)
@GregSr4 жыл бұрын
Wow! This repair is very similar to what I did on my 2003 Corvette. Same symptoms too. The oil pressure switch went to full scale which was 80 on the analog gage and 130 on the digital readout. One difference: my Vette did not set any codes. The oil pressure switch is right where you showed it - but one big difference. The back of the engine sits under the bottom of the windshield. It took me two hours to complete the job. The local repair shop wanted $250 plus parts. I said no thanks and did it myself.
@openyourmind553411 ай бұрын
Funny took me 10 min with the right tools and didnt have to remove anything
@michaelmoreno493910 ай бұрын
Going through this now. This video should help to avoid doing it the hard way. My shop wanted $475 for labor.
@simonchang39294 жыл бұрын
I enjoy how you chase those wires down with knowledge, experience, savvy and Logic, but, my real Respect comes from getting your fingers dirty with no sissy surgical gloves, like a real “mechanic”. Thanks to your shows, I learned a lot.
@jeepgarage9 жыл бұрын
Less blablabla than ETCG, much more humble and interesting, thanks for the quality of your channel
@SouthMainAuto9 жыл бұрын
Lol well thanks Jean Marc ... I dunno though I can blah blah on occasions
@shannoncole64255 жыл бұрын
I like both.
@WCGwkf5 жыл бұрын
Nothing is wrong with either of them
@josephsfields6 жыл бұрын
Eric, You are not an ordinary Joe, you're an exceptional Eric and I should know. I've been around the block a time or three and you're the real-deal.
@peterdragon96304 жыл бұрын
I have a '96 Silverado 454/7400 gauge does the same thing- shows zero at idle, then jumps to 50-60 when revved, no engine noise, would have blown by now, been over a year, pretty much assumed it was the sender like you found here, will get around to it sometime- it's a bit of a beast to get to and don't have that cool ratchet you have. I like that creeper thing too- never knew they existed. I learned something. Thanks.
@stewarttwins8 жыл бұрын
This was awesome! I wish that you lived in WPB!!! I would bring my car to you every time!
@KevinJohnson-fx6wq5 жыл бұрын
When I first got my '07 Mitsubishi Galant the guy I bought it from had some experience and told me oil sensors would go in these cars. About a year later I was driving up to Rochester and the oil light came on, so I put some oil in without checking the oil. Yeah, what can I say, when I got back and checked the oil it was overfilled. It took me a couple days and then I remembered being told about the light and ordered a new sensor. Yup, mine was in a weird spot behind the engine too, and think may have needed some special tool and since I had an inspection due I just had my mechanic replace the sensor. Well worth the $30 and I did siphon some oil out too. Thanks for sharing.
@SuperDave216 жыл бұрын
You really seem to have a lot of knowledge for someone with no specified training! Way to go...!
@16B92 жыл бұрын
It's always fun to watch your videos and listen to your commentary. Thank you for making my day. :)
@MrEmems9 жыл бұрын
Great Video, Straight and to the point,, you helped me out so much, thanks again
@byrysh8 жыл бұрын
ASE stands for *ask somebody else* 'cause they dont know.
@consaka18 жыл бұрын
+byrysh Lol. I have seen some pretty smart ASE certified mechanics. I have also seen some that were totally clueless as to any of the physics behind what makes anything happen on a car or engine. My first boss was not ASE certified and he was a bloody genius with truck engines and knew his way around a welder like nobodies business. He was an expert in many things and could pass the day telling real life stories to emphasize his point. In fact he could do that so well the day could end without a danged thing getting done. lol John Nesbitt. A great boss and genius in many things. No joke when I say ASE mechanics routinely called him with tricky problems.
@byrysh8 жыл бұрын
consaka1 I was ASE certified in 90's lol I was makin a joke. Ive seen some supersmart ones too as well as some that were realy... well not so much.
@kencaldwell13995 жыл бұрын
ASE is really about how well you could take a test. I used to be an ASE certifies Master Truck Technician. I was a pretty fair mechanic in the fleet world, but there were guys in other fields that were so much better than I was. They may or may not have been certified.
@mechanictaft48485 жыл бұрын
Ive been a mechanic over 30 yrs got my ase yrs ago never bothered to keep up with it i learn on my own school didnt teach me anything sorry
@kevinhoward66075 жыл бұрын
Yes I'm not certified but my resume fairs well
@jimbarnhart2059 Жыл бұрын
I am an ASE certified Automotive Master Tech and I have watched you for quite a while and I'm certain you could pass the ASE tests, if you ever wanted to go that direction.
@georgeprice6252 Жыл бұрын
Yes Did that to the 2007 Ihad But I was told to not put the screen in it so I did not put it in The oil pressure is great and truck is still working great
@int531859 жыл бұрын
No thumbs down. Pretty impressive, Eric O.
@swissking20029 жыл бұрын
Well guess what, it seem like it was the oil pump. I change out a lot of thing and this was a lot of work. I end up also changing the oil pan gasket, filter valve that located on the oil pan, timing chain cover since I took it off, also the oil pressure sensor and small filter. I used a proformance oil pump milling 365. Well everything is working great and oil pressure is back to 40. not to mention the oil pan was dirty and had some sludge. My truck had only 96,346 miles. I don't know why this happen, Well I'm happy to get her back on the streets. Thanks for help
@SouthMainAuto9 жыл бұрын
swissking2002 Glad you are back in business
@TractorMan1045 жыл бұрын
Gotta love that "cab forward" design.
@jeffbrown39635 жыл бұрын
Love your common sense troubleshooting!
@mattbartholomew57079 жыл бұрын
All the warning light bulbs are working atleast it has that going for it. Remember when my oil warning light came on with my last car on the highway within the minute it took me to find a safe spot to stop the engine was a gonner. Served me well though with a total of 213,000 miles on the clock to be destroyed by a o-ring blocking the oil pick up.
@SouthMainAuto9 жыл бұрын
All good things come to an end my friend...
@CompTechMike2 жыл бұрын
Another great video! Man, terrible location for that sensor. I need to get a wrench like that. 😁
@ronniecardy4 жыл бұрын
Had mine replaced also along with a leaking heater hose. Cheap plastic hose fitting on the heater core went bad
@SteveRobReviews9 жыл бұрын
Well done - at least GM puts a real oil pressure reading gauge on their truck. On my Ford they cheeped out, it's just a on/off switch shown in a gauge needle that swings to 3/4 and off. Hey Eric I don't have any ASE accreditation either, how did we ever survive this long :) I replaced the intake gaskets on my 6 liter 2 months ago and also replaced the knock sensors and harness , not the oil pressure switch. For sure after watching your vid it's going to crap out. LOL
@SouthMainAuto9 жыл бұрын
Lol oh you bet it will haha... Knock sensors and a harness on a chevy 6 oh.. never heard of such a thing haha ;)
@marvinmendoza53523 жыл бұрын
YOU THE MAN! YOU MAKE IT LOOK SO EASY
@tampabaybuccaneersfan79044 жыл бұрын
I have a 2006 chrysler minivan, with a V6, there's no room to do hardly anything without a lift, just changing oil is a project
@flexjay872 жыл бұрын
Had me LOL on " This is a real Gem" :)
@david600R5 ай бұрын
Eric you look so young 😂🙏🏼💯
@robertclubs99082 жыл бұрын
Great show
@HowardJrFord5 жыл бұрын
The engines in these trucks are famous for losing oil pressure, though. The O ring in the pump pickup is known to fail, causing it to suck in air.
@whitetiger86529 жыл бұрын
I need one of those ratchets and top side creeper.
@SouthMainAuto9 жыл бұрын
White Tiger Oh they are a great help let me tell ya
@rrcoster7 жыл бұрын
You direct link to where you can get one these snap on ratchets from snap on or amazon
@williammangold53054 жыл бұрын
You do a great job learned a lot from your vids
@DYLANTRIES5 жыл бұрын
I just pull the intake to replace them lol but I'm not a full time mechanic just a backyard guy so I've only done it a hand full of times lol
@carmencolumbusohio8 жыл бұрын
Wish there were Mechanics like you here in Columbus,Ohio. Everyone wants to rip you off nowadays
@MrYuck98 жыл бұрын
Wish you were in my area. Be my go to guy. : )
@HappyHands.5 жыл бұрын
this video made me go BRRRRRR!
@tweker694 жыл бұрын
U should by a cheap battery powered leaf blower to gett all that snow off so your not working in such a wet environment
@JRobert1111119 жыл бұрын
That part looks a LOT easier to do on a 4.3 Astro with the engine cover off. One advantage of a van.
@SouthMainAuto9 жыл бұрын
One advantage to a van... I think you mean the only advantage haha
@mdogg16048 жыл бұрын
When no.6 coil went bad on my '08 Cad DTS it set off a number of false messages including "Service Stabilitrak/Traction Control". A new coil and all warnings gone. I can see a lot of folks helping pay for the fancy dealership remodel project by getting charged for parts they didn't need or that were never installed.
@jaywebb01138 жыл бұрын
+matt zehentner when your coil went bad it was causing a misfire when these engines detect a misfire the traction control and stability control will be disabled and those lights will show on dash as something is wrong with those systems. I see it every day at work.
@springfield45222 жыл бұрын
WooHoo! an unviewed video!
@kozartlist6 жыл бұрын
Thank you for a useful video
@jakespeed633 жыл бұрын
Thanks for sharing but I’m confused Same code, swapped in new sensor not the screen Scan tool reads good oil pressure and I can sweep all the gauges using functional test
@SushiPac9 жыл бұрын
SNOW!!!!!!!. We don't have that stuff here in California
@SouthMainAuto9 жыл бұрын
+Paul Morales your missing out!
@RandallFlaggNY8 жыл бұрын
+South Main Auto Repair With snow comes the salt. Haven't I heard you piss and moan about rusty crusty vehicles?
@SouthMainAuto8 жыл бұрын
RandallFlaggNY I piss and moan about it, but it is where I get my living from
@slappopotamus10015 жыл бұрын
cali gets plenty of snow in the hills, cant say "we don't get that in cali".
@shimes4245 жыл бұрын
@@slappopotamus1001 most don't commute to work after inches or feet of snow
@jamesbailey77853 жыл бұрын
My neighbors 2007 1500 5.3 lost oil pressure the other day. Truck dipstick showed down a quart. I topped off and started, gauge went to 40 at 1800 RPM . I can keep at 1800-2000 and it will stay at 40 ish for about 3 minutes then slowly drop to the warnings coming on then to zero.. To me this sounds like once oil get warm this sounds more like pump area problem more than a sensor. Any thoughts before I dive in?? Tom
@randygreen89164 жыл бұрын
Good job, I probably would have traded it off.
@skweekah8 жыл бұрын
Love your videos Bro!
@6n5182 жыл бұрын
What if you replace the sensor and you still have the P0523 code? Broken "New" sensor?
@marrerful5 жыл бұрын
You are defiantly SAF Eric and my name is........Eric
@donbraden85334 жыл бұрын
Glad I watched this video my 2012 silverado at idle has 40 psi while driving just under 50 psi do you think it would be the same thing
@chewls11336 жыл бұрын
My 2009 Silverado 1500 just started this problem. I’m not lookin forward to this work.
@MrMaddparkison5 жыл бұрын
I had to replace my pump an seal. I didnt even thing of the switch an filter. But my pump was blown.
@insaneasylum78988 жыл бұрын
the classic reach around.
@justinp89468 жыл бұрын
I live it when my wife does that to me.
@joes.75365 жыл бұрын
There is guys luke the one that own this truck , and then there is guys with me, with mild ocd, that spend 7 hours chasing down a broken wire igniting the airbag light on a $2500 winter beater.
@lorddpablo9651 Жыл бұрын
I changed my sensor still having the same problem . I think my oil pump isn’t working 😢
@nggdsb5 жыл бұрын
Question. .. can the 2019 Chevy Colorado Diesel fall victim to the p0449 issue? I cannot find any information about it. thanks in advance.
@SouthMainAuto5 жыл бұрын
no
@rodpalm63988 жыл бұрын
I like the ladder with the pad. You really can't work on these trucks without something like that. Formal training "classroom logic" is highly over rated.
@crapper19 жыл бұрын
wow from the looks of the dash lights and the fender a sensor might be the least of his worries
@SouthMainAuto9 жыл бұрын
+crapper1 I know right!?
@sueglenn83148 жыл бұрын
+South Main Auto Repair help what if my oil burns every time I go up a hill no matter how low or high it is to hills takes over 1/2 my oil and one more I check it and its bone dry I replaced all the filters and cover's no leeks but when on a hill it smells burnt on a Chevy suabern any info will help thankd
@ANGRYCHILD3058 жыл бұрын
+Susan Gle i know the question is directed to eric. but from the sound of it you might want to check the pcv system. its a cheap part to replace Nd also easy to diagnose
@sueglenn83148 жыл бұрын
OK thanks
@jimzivny15547 жыл бұрын
crapper1 But he's got a lift kit installed! Who needs dependable when it looks good! Lmao
@briansmobile17 жыл бұрын
The only reason I got ASE certified was my work paid for it. It got me my dealership job at Mazda, but that wasn't exactly heaven and a paycheck. So...... Small to medium sized independent shops are where it's at if you ask me- and they usually don't require it.
@sandyrandall73415 жыл бұрын
Eric you are not an ordinary Joe! You are a wonderful Mechanic in the Rust belt! Whoa Nellie!
@javierbetancourt82255 жыл бұрын
Lmao im an ASE master and watch you to improve my electrical diagnostic skills and procedure
@jarveysorensen55024 жыл бұрын
Im ase certified too .and it dont mean sqat.
@javierbetancourt82254 жыл бұрын
@@jarveysorensen5502 not saying I'm better because of it. I live in Miami where if you want to open a shop or be a shop forman and certain dealers one must be a master. Some places require two or more. And it means a bit more than squat something like $480 or more.
@BayAreaMCs4 жыл бұрын
You should also check out ScannerDanner’s channel .
@Barnekkid9 жыл бұрын
I'm new around here and I've been really enjoying your videos. I really like the thing about "I can do it, you can do it." Way to go. Big thumbs up too.
@SouthMainAuto9 жыл бұрын
Barnekkid Welcome aboard :)
@brianmoore69214 жыл бұрын
Btw, GM has a service bulletin out now that says remove the screen and throw it away... thought you might like to know
@noahkb804 жыл бұрын
Where,?
@brianmoore69214 жыл бұрын
@@noahkb80 under the oil pressure switch
@jamesplotkin46745 жыл бұрын
Amazed the guage actually reads true pressure. Most are numb idiot "somewhere-in-the-middle-should-be-good," so consumers don't get all excited if it should read low in the summer.
@MitzvosGolem16 жыл бұрын
fixed three so far no oil pressure. It was the small screen under sender which also feeds lifter and cam bearings. Brake cleaner cured it . One shop said oil pump was bad...lol
@mtsanchez274 жыл бұрын
Whats the part name I need to change mine?
@MitzvosGolem14 жыл бұрын
@@mtsanchez27 remove oil pressure sending unit from top rear of engine there is a screen inside fitting under sender unit in pipe . Just clean it 2006 and up .
@blacktoothgrin58308 жыл бұрын
ya know it's one thing to be able to change the blinker fluid but this oil sensor on the ol' lady's '07 Tahoe had me broken to the point of driving it off a cliff. You convinced me right there at the end to keep on truckin. That's Awesome brother! Thanks for the Motivation i needed that!!
@AntonioClaudioMichael2 жыл бұрын
No oil peices because of a shorted Oil Pressure sensor Pretty Simple Diag Nice work Eric O surprised he was concerted about no oil pressure and they had a 30 minute drive there 🤔😬😳 @SouthMainAutoRepairLLC
@steamguy1015 жыл бұрын
Mr. O.: Don't be so humble here! I don't care how many certs such as you may have, there is no substitute for the experience level you are displaying. Kudos to you and your lovely wife and family, this should be a shining example of how we should be doing business in the auto repair world as well as almost all other venues. With love and admiration for all, Bill
@goodfellasinc.56487 жыл бұрын
Im glad you said you don't need to be ASE certified I been building hot rods and more for years quick story my dad fixed an ASE Cadillac certified mechanic mess LOL they could never fix the problem anyways love your videos you're the best I've seen on the Internet by far
@Mr92cadi8 жыл бұрын
oh and no brake clean??? you feeling alright?
@laohantun74048 жыл бұрын
Unbelievable Eric, lots of fun watching your videos. Straight to the point.
@josepeixoto33845 жыл бұрын
Don't worry,I'm sure this is the first truck they made; when they build their 2nd one,they'll put the oil sender where you can see it, but check for that anyway,BEFORE you buy... in fact,check for all other items too,if you can't see them,PASS on that shht until they show consideration.
@TheFoxShop9 жыл бұрын
First time viewer here! I just did this on a 2003 Chevy Tahoe.. what a pain.. Looked like my vehicle had way more stuff right back there where I needed to get to than several I have seen here on KZbin. That job literally took me 6 hours to do! 6 hours of laying on top of the engine trying to not only get my hand back in there, but replace the part! Used a little shop mirror and multiple lights... important thing is I got it done, but what a pain! I don't do this for a living, it was my wifes vehicle.. Im usually working on my 1994 Ford F150, so was a change of pace for me and a relatively bad experience. LOL!! I do have my own KZbin channel as well if anyone is interested, primarily about the restoration and other things on my F150 Pickup, but its not strictly a Ford only channel or anything, although that's mostly whats on there now. Hope you don't mind me plugging my channel here. At any rate, nice video and Im subscribing. I am very interested in that topside creeper that you have!! I have a 6 inch lift with 35" tires on my truck and something like that may come in very handy!! Im 6'2" tall or so, but still have trouble reaching stuff. Do you have any info on that creeper? Im going to google it and see what I can find as well. Keep up the good work! Going to be a horrible rotten hot and humid day here in Central Iowa, so may just stay kicked back in my recliner, nice and cool in the A/C and watch KZbin vids all afternoon. LOL
@SouthMainAuto9 жыл бұрын
The Fox Shop Haha nice sounds like a plan. It was pretty toasty here in NY today too. Did you find what you needed googling the topside creeper?
@TheFoxShop9 жыл бұрын
To be honest I didn't get much of a chance to look around much longer after posting that. LOL!! However I do plan to. My sister ended up coming over.. then we got busy freezing corn, then hit the pool, then took a nap, LOL! I like your channel though and plan on spending hours searching through it. :-)
@notyou18775 жыл бұрын
The man who designed this thing will never try to work on it and fix it. I think they should. Or, get shot if they can't design it for ease of maintenance.
@briantomazi94915 жыл бұрын
just a regular joe from one of the best at test not guess mechanics in the country
@dwoodog5 жыл бұрын
I'm watching this video in aug of 2019. Little did you know how popular your channel would become. Tons of great videos.
@EasternExplorer8 жыл бұрын
My dash is lit like a christmas tree to. My motto? "run her till she blows" lol
@johnferguson72356 жыл бұрын
Park it and leave a key in the ignition and wait for someone to steal it. Take the check from the insurance and go get another one.
@VBshredder5 жыл бұрын
LOL - seriously got a good laugh out of this. But hey if it's a $400 beater car this might be the way to go!
@85square4 жыл бұрын
More like "it's a chevy"
@ThecardoctorTV4 жыл бұрын
Can I borrow your creeper?
@WelcomeToLogoland9 жыл бұрын
I just went through this and the thing I found most challenging was to get the connector off. after lots of research I found I had to remove the grey tab and push on the clip that was help back by the grey tab. little things can mean alot.
@TourettesMobileMechanic2 жыл бұрын
Sooo. Was it a partiality collapsed lifter or should I try this I’m having the same issue. Usually when unplug a sensor it should not change operations? If it’s bad correct?? I’m asking because I’m having the exact same issue with a tic. 5.3 liter Tahoe 2008 and I have no oil pressure but it’s I believe just dirty fluid. Ima run some liquid Molly through. 98% partially collapsed lifter?? Thoughts?? Also. ABS I fixed. Rusted out ground plates Underneath the frame. Undercarriage…
@tomchristensen29145 жыл бұрын
would love to see a video of an oil pump replacement on a 6.2 gm motor. I need to do mine and you do the best videos
@angelramirez77476 жыл бұрын
You're the man Eric O. I've learned alot by watching your channel.
@MrWoowootila9 жыл бұрын
New subscriber, really enjoy your videos. I work on my own cars, but have a aviation maintenance background. Just curious, you mention you do not have your ASE qualification, did you go to school in automotive maintenance or did you learn on the job? Your definitely a very sharp mechanic and I am learning a lot from your videos keep up the good work.
@SouthMainAuto9 жыл бұрын
Johnny Woo Nope just on the job :)Went to school for building trades actually.
@MrWoowootila9 жыл бұрын
I can relate with that. I started out graduating business school. Hated working in a office. Started flying, bought a airplane and went into business my self. Worked on my aircraft and flight schools aircraft in my 20's and now flying for foreign airlines. Alway enjoyed the aviation maintenance part of my life and was often surprised that people who did not have formal training were better mechanics than the people who went to aircraft maintenance schools. Learned a lot from the best, and tremendous respect for great mechanics, aviation or auto. Keep up the great work, learning a lot from your videos.
@williamsavage63015 жыл бұрын
I don't care if you are ASE or not, you are the "car whisperer."
@fullcend-tkm734 жыл бұрын
Also if the digital display in like the Escalades mess up, but the vehicle is running fine. If you pull that oil pressure sensor out, there's a little filter down there that you can replace or clean out and that little filter underneath the sensor gets plugged up. I just didn't want on a 2007 Escalade
@NJPurling5 жыл бұрын
I know he was only bringing the truck off his parking lot in this instance. In the UK I see people driving to work after clearing a pie-plate sized spot on their windscreen.
@RedArwBus5 жыл бұрын
They do the same thing here in the USA,I'm from Philadelphia PA and see only a small spot off the windshield and nothing else cleared off and they are going down the road at 50mph, and a friend of mine got hit by a guy like that who has a 6 inch circle cleared on the windshield and nothing else,he said the cop threw the book at him for not properly clearing the snow off the car
@NumberOneCook6 жыл бұрын
I need help!! I have a 97 chevy silverado that died on me while driving and now it won't start. Checked the relay and it's good but when I checked the fuel pump connector I only have pump prime power. Anyone know what this could be?
@joetiller10318 жыл бұрын
I've watched all you videos so far just wondering never seen you work on a diesel truck do you not work on diesel's don't blame you if you don't the newer ones are junk the way I see them.
@baims8367 Жыл бұрын
This happened to me last night after doing a pan gasket guy wanted to use 10/3o oil 5 qts w 1 qt of Lucas. Used Mobil 1 oil filter fired up fine and normal sounded great I hopped In truck saw dash and 😮passed out Wtf. 05 sierra 5.3 had acdelco on it. Help he’ll 😢. 😩
@kws19575 жыл бұрын
You're cool man, I like guys like you. God bless you All ! Bye.
@chunk3865 жыл бұрын
Eric I will pay you right now if you can give me a 2nd opinion. I know it's hard over the internet to do it. but my wife has a 2012 chevy sonic. about 75-80k on the clock. its having oil pressure problems.. took it to Chevy they said it needs all kinds of stuff. I changed the oil pressure sending unit already. dont like being a parts changer but figured was worth a shot. I'll send you the invoice from dealership if it helps. they want 2300$ to fix it. I can get a new engine and have it put it for about 1600. they say it needs both cam actuators. oil pump. timing belt, idler, tensioner and necessary gaskets. would you fix it or change motor. or can I go about it different. start some where and see what happens. I will pay u right now through pay pal patreon. what ever. I'd bring it to your shop if I could. I live in fl
@KRTube753 жыл бұрын
It's next to impossible to get to on the LTZ Suburban. It has an insulated sound proofing cover back there that blocks access. Had to remove the intake to fix mine twice. It's a 2007 with 320,000 miles on it.
@rodneykillian76963 жыл бұрын
I have a 2007 Avalanche LTZ , I just rebuilt the motor new rings , pistons , cam bearings , etc did the break in process . Now the oil pressure gauge has dropped to zero. Replaced oil pressure sensor , still on zero . What should I check next ?
@davidhollfelder99405 жыл бұрын
Hmm .. “It all was just fine a week ago” ... 🤠
@eastside04342 жыл бұрын
I have no oil pressure in an 06 2500hd 6.0 225k miles,hearing a lifter ticking,does this rule out sensor and more likely an O ring or oil pump,hopefully not a spun cam bearing.
@billdoell990 Жыл бұрын
Had no oil pressure, in my 2009, changed sensor, still said, no oil pressure, ran fine, took out the old screen, fixed the problem. The screen was, plugged, through, new screen in garage. Runs fine, lots of pressure now.
@mrbrowz10001012 жыл бұрын
I'm going thru the same problem. My mechanic replaced my oil sensor but my engine light is still on and my vehicle runs sporadic. Crazy part is my engine light turned off today for a good 5 mins and the truck ran beautifully. Soon as the light cut back on, it tried hesitating again. Smh.
@larryehrlich87023 жыл бұрын
What all that white stuff...I live in Florida and we don't get any white stuff here. Wait, wait, wait, I grew up in Colorado and lived in Alaska for ten years...I vaguely remember that white stuff.
@billymikoliza4 жыл бұрын
I had a similar issue. But mine was reading 20psi. Dealer wanted to charge me 500 to do it. I did it myself in 30 mins, with a Delco part. Cost me about 70 in total, tools and all. How do they get away with such prices? I keep the tools used handy, because the damn thing is bound to go out again.
@JAVY-sj9uy4 жыл бұрын
i changed sensor , oil pick up tube O ring,new oil and lucas oil stabilizer and still have low pressure .38 psi when driving and like 22 to 25 psi when stop. is it normal? 2011 tahoe ls 5.3