I purchased a laser welding machine directly from a manufacturer in china. Just trying to go through the paces and figure it all out on my own #chiassonsmoke #welding #diyprojects #laserweldingmachine
Пікірлер: 400
@CoreyKortum8 ай бұрын
I have a 1500W laser welder. I have had it about 1-1/2 years now. Gun angle is important to get a good weld. Wire diameter makes a big difference as well. The larger the better. I run 1/16" wire most of the time on mild steel, .045 on aluminum and stainless. I would be happy to discuss with you some pointers on making work better for you if you want. Just let me know.
@ДмитрийВикторович-ъ7у7 ай бұрын
Just bought 1.5 Kw laser welding machine. Can you gabe some advice about working parameters?
@dangarcia74947 ай бұрын
@@ДмитрийВикторович-ъ7у Ware do you order your 1/16 wire from?
@iamthemastermind7 ай бұрын
What is the name brand on yours if I may ask?
@gags7306 ай бұрын
Great comment. Welding with a laser is just different. He needs to get some help and his attitude toward the laser will change. It isn't perfect but nothing is. Right now he seems more skeptical about it than anything.
@tonta1825 ай бұрын
i also have a 2 year old laser welder and im about to change it, the handle and the cable weight kills the wrist, just love the machine but the ergonomics are horrible when working with them
@ferrumignis8 ай бұрын
The issues with gaps suggests this system is more suitable for production of fabricated designs with machine cut or carefully hand fitted parts rather than general repair.
@HP318 ай бұрын
It has an adjustment on the machine to weld different gaps. With the double wobble machine you can adjust the weld bead to 5 mm wide.
@darrinjones93878 ай бұрын
Mine will do 3mm, but I just give it another pass
@kingrutse32788 ай бұрын
Use Tig welding rods
@DansBuddhaBodega8 ай бұрын
@@kingrutse3278 like hillbilly welding? Fill the gap with filler metal, then weld over it? I know guys who do alot of stick welding will put electrodes in crazy gaps, but they're usually welding steel at least a quarter inch thick.
@secretbassrigs8 ай бұрын
then just use a regular welder!
@noneofyourbusiness16838 ай бұрын
I used to operate a 8000 watt dual head laser welder. We used it to butt weld steel coils together. The two major problems we had was gap issues and the heads not tracking the seem but after a few upgrades the machine worked awesome. We could weld a 60 inch wide strip in about 15 seconds. There can not be any gap and the laser has to track center or the weld will break.
@therestorationshop8 ай бұрын
Thanks for taking the time to film and post.
@chiassonsmoke8 ай бұрын
You bet
@timmontano87927 ай бұрын
You should start up a group. You could call it, "Laser Welders Anonymous." As with all high tech products that hit the market, it's only a matter of time before these Laser welders get smaller, cheaper and more versatile.
@davidwillard73344 ай бұрын
Like the Laser Rust Remover ! Is !
@lancer22048 ай бұрын
From what I have been "TOLD" Fit up is crucial, as you mentioned they don't like gaps (the laser has to hit a surface to provide heat) Everything has to be CLEAN, there is very little heat (compared to TIG, MIG etc.) to burn off contaminants. GREAT on thin gauges (that low heat thing again) Autogenous welds are fun. Treat it like a low temp TIG Again, it's what I have been told, so YMMV
@KittyBertandErnie7 ай бұрын
Great point that the laser has to hit a surface!!... Im looking at a 2k raycus 3 in 1 on amazon
@dalewilson74348 ай бұрын
Nice machine, however, as you know, it's hard to get perfect fit up every time. But still interesting, would like to see more. I WAS in the welding business for over 20 years and it's still interesting. Thanks from northern Illinois.👍
@HP318 ай бұрын
It does not need perfect gap. You can adjust the width of the weld on the machine.
@thecapitalalliance8 ай бұрын
I can see how this would be useful for replacing body panels in automotive restoration/ RestoMod work. Often times the replacement panels are about 19-20 gauge and traditional tig welding is more time consuming and throws down a larger weld.
@d4z_l20svaQ128 ай бұрын
Maybe if it weren't for the gap issue. You'd have to cut a perfect replacement out. Might as well stick with tig since you can fill small gaps with filler rod
@Comm0ut5 ай бұрын
@@d4z_l20svaQ12 MIG brazing (and TIG brazing which you can also do with MIG brazing wire and pure argon like TIG) is increasingly popular for body work.
@umairaziz70235 ай бұрын
What is price this machine welding
@rezkidgamingyt47258 ай бұрын
This thing would be awesome for auto body, welding, vintage vehicles
@FairladyS1304 ай бұрын
Except for the gaps.
@bartekmedes82813 ай бұрын
Absolutely beautiful clean welds with no distortion is game changing, especially with automakers moving to aluminum bodies.
@Stoney3K8 ай бұрын
This thing has its limits but it has two *major* advantages: Extremely low power consumption when compared to a regular MIG so you can weld on the move, and the ability to actually see where you're welding, instead of only seeing the melt puddle.
@leonvdm4 ай бұрын
The 'glass' of your darkened weldingshield also is a consumable. Change it, it will change your welding for the better.
@PacoOtis6 ай бұрын
Excellently presented and very informative! We definitely owe you a beer! Best of luck!
@kevinlytle62158 ай бұрын
Really informative presentation. I look forward to seeing more complex uses as you learn the tool.
@codilankford61738 ай бұрын
Get real high quality laser goggles that are matched to the wavelength of the laser on the machine. Those cheap ones that come with it can make you end up blind.
@kitatit8 ай бұрын
Great vid! Thanks for taking the time to show us what a machine like this is like!✊
@Megellin8 ай бұрын
I think it would be good for things like auto body, decorative things like flower garden entry gates, picture frames, motorcycle gas tanks, and other jobs that require a thin extremely uniform welds. If a person had a business that specializes in that kind of stuff I can see getting one. I'll stick with my stick, mig, tig, and oxyacetylene for the stuff I do though. Tig can do all the fancy stuff too just takes a lot longer, but I don't get a lot of projects that require me to do that stuff.
@229Clayton8 ай бұрын
Agreed, though with new tech being developed daily there are 3kW machines that do a nice job on thicker 1/2 inch plate, only a matter of time before these machines will handle 2-3 inch plate, if it's not already available.
@johnjelinek-g7b8 ай бұрын
So, it's like a TIG and a MIG all rolled up in one with a bulky gun . Makes prettier welds than both (with less practice for a nice TIG look) , but has a problem with changing over to different materials . Wire changes would be a pain, especially all the different choices for stainless and aluminum . And then the cost . Last I heard they weren't priced like a little Primeweld . Like you said, it would be good at thin no gap jobs . :)
@HP318 ай бұрын
Wire change is simple. Remove one spool install a new spool. Welds many different types of metal. Even different types to each other.
@Th3_Gael8 ай бұрын
@@HP31where do you get these?
@chrisbryant66188 ай бұрын
Where did you purchase this from? Link please?
@riselaser69275 ай бұрын
I have a lower price version of this product here. Do you still need it?
@peterkacandes59055 ай бұрын
How much did it cost? I’ve been seeing lots of interesting ads, but who knows what is lgetit or a scam?
@riselaser69275 ай бұрын
@@peterkacandes5905 We have our own production factory and may I obtain your contact information to provide you with product quotations and detailed product information.
@bennyherrera6550Ай бұрын
Where can I get one of these bad boys?
@fahrzeugerklaerbaer8 ай бұрын
gaps aren't necessarily a problem. its a settings thing. I tried it to at a fair and it worked fine. also your feed rate seemed a bit slow. am i wrong?
@hanko4562 ай бұрын
Thanks again for shearing your knowledge. That's great experience. You explained perfectly
@JermichaelAdventures5 ай бұрын
Thank you for the information! Amazon does not have any reviews but sells the same thing you bought there.
@larrykent1968 ай бұрын
Thanks for the video. I seen these around, I went to the manufacturing shows to see these machines setup with cameras and precision controls doing some fantastic precise welding. Now showing these with that much power, 900 Watts for a hand held LASER is something. The process, the skill must meet you will get there I am sure. Technology once imagined now a reality, Einstein showed it could be done then in the 60's with a Red Ruby they made happen, now at our finger tips. Pretty cool. Cheers!
@darrinjones93878 ай бұрын
1500 watt machine is pretty common now.
@Moonlightshadow-lq4fr8 ай бұрын
Good honest description and demo. Thank you. These videos are worth their weight in gold. Seems a great welding machine for tacking and serious model work, as for welding underneath cars hardly practical but for the likes of myself it would be fine for small jobs taking note of clean materials and gaps in hand, you have shown me it may well be worth having. I shall cogitate over this for a while before the land grab :)
@secretbassrigs8 ай бұрын
worth the price? lol! NO!
@BillyNoMate8 ай бұрын
well it makes sense that it doesn't like gaps, the laser looks straight through that gap to the other side of the work piece. Unlike an arc which jumps from side to side.
@joelamoos56847 ай бұрын
Looking at the amount of sparks, did you first do a focus test/calibration? You will get better and cleaner welds.
@gillyrcgilmore37428 ай бұрын
New tech is always fun to play with. Does it weld aluminum?.
@hinz18 ай бұрын
Kitchen builders will love it, for excavator, good old stick/TIG machine with lots of amps, for me!
@autoguy19808 ай бұрын
If you want to Fill, crank up the wire feed rate, but slow the drag. It'll do what you want it to do.👍👍
@Karmabim1238 ай бұрын
Good video, I was keen to see how this kind of welder performs. Just one thing, I think you really should wear a full-face visor otherwise you could still get UV burns on your face. I think the gap filling issue might be improved with larger welding wire and higher wattage.
@ScorpionRanchTX8 ай бұрын
Looks like it would be very useful if you find that specific application for it. What's the name of the machine/where'd you get it?
@Outland90008 ай бұрын
I'm guessing it might be useful if you're welding the same pre-fab thing over and over because of its speed?
@jeffl75818 ай бұрын
I have regularly visited Aliexpress to explore various welders, and have often found myself hesitant due to the pricing structure. Your recent video has further diminished my interest in this particular welder. From my perspective, it seems less accommodating for amateurs, prompting me to continue using my existing Mig/Tig welders for the time being. I hope the manufacturer will address the issues you highlighted and improve the design accordingly. I appreciate your detailed review and demonstration of the welder's functionality. It has been informative and has guided me in making a more informed decision about not purchasing this machine at this stage. Thank you for sharing your insights.
@ThePfirefighter28 ай бұрын
Makes sense that it won't fill gaps. If it is using the laser to heat/weld the metal, a gap gives the laser no place to focus the heat, except on the filler material. If you have a gap, then you would either have to machine the metal to tighter tolerances or build up from each side. Just my $.02 worth.
@scorp94383 ай бұрын
is it an all position set up ? the angle of attack might have to change , but i really like what im seeing , very interesting .
@DansBuddhaBodega8 ай бұрын
Ive only seen shops use this for cheap, "assembly line" type of welds on thin sheets of alloys. What use is a welder that can't handle a gap? Whether it be structural or pipe, proper fit up almost always REQUIRES a gap. I'll stick to my mig welder, thank you very much.
@bobreichel8 ай бұрын
It causes the beem to wobble back and forth in width. Yes it's on your machine. You'll need to find it as I'm not Sure where it is on your panel.
@teeanahera89498 ай бұрын
What’s a “beem”? Did you mean *beam?
@zugzug11078 ай бұрын
@@teeanahera8949 Yoy point the beem at the seem. You know what I meen?🤪🤪
@vociferonheraldofthewinter22848 ай бұрын
As an artist, I'd need to know the cost to see if it's reasonable. With my husband doing the big, serious stuff and me doing the fine projects, we'd be a great team, but I couldn't see myself spending more than $300 for the whole thing. I'm also curious about sourcing the consumables. Where do we get those?
@cnccarving18 күн бұрын
im before to get one 1.5 kw watercooled with 4 option shipping and custom fee it comes little under $k the possibilites maes it more valuable than any other conventional welding thank you much for your video
@mattweeks71428 ай бұрын
Great to see a good honest review on one of these things. Thanks for sharing.
@rogersliu12008 ай бұрын
in a production environment, this is supposed to be used with CNC cut tubing which fits perfectly together. if you manually cut or your joint is not perfect, it is hard to achieve good weld.
@johncollinsgrove17508 ай бұрын
I would bet its not the fact that it wont fill gaps but be the fact the laser has nothing to hit. Laser hitting the metal is how the heat to melt the metal is transferred. So if the laser is shooting through the gap then no heat is being transferred to the metal trying to be welded. But if you run a larger puddle of metal i would bet you would have better luck. Slow down your movements and maybe speed up wire some. No experience with laser welders but have done a lot of welding. Would be nice to mess with one tho. Seem pretty neat.
@MateuszLisek-og7ft6 ай бұрын
Hi, can you share the name of the manufacture or maybe a link?
@njnavarro20048 ай бұрын
What's the manufacturer's name and the model # of your welder?
@steventrog107823 күн бұрын
So i have seen many videos where they question the strength of a laser weld. So i wonder what if you layed a 7018 stick at the joint to be welded , would it be a better weld
@DansBuddhaBodega8 ай бұрын
Also... you're moving at a snails pace compared to how ive seen these used. Maybe bumping up the power and wire feed, will make it more like spray trasfer than short circuit? In my experience, butt welds are almost always cosmetic.
@thomaslangford63643 ай бұрын
Would Tack welding a ground to simultaneously to each of your pieces make the "no ground" issue better? or even attaching to a equivalent GROUND that you attached during the tacking process?
@duramaxpete52008 ай бұрын
So what does it cost!
@madmaxd18 ай бұрын
Yes! Laser welders are not ideal for welding gaps... but there's a trick. Obviously depending on the gap, you can use the electrode wire as a filler by feeding it. On wider gaps you can actuality not use the laser's wire but use tig welding rods. You basically use the tig's rods as a filler. I think as of the cosumer's available technology, the laser welder cannot replace the TIG welder but it can certainly fill in the gap for new users and the capacity for fast welding. Quality of welds are not bad, so there's definitely a place for these laser welders.
@alltheboost53638 ай бұрын
I've alway wondered how these work. thanks for the video
@111alien11127 күн бұрын
Awesome bro, keep it up. Thanks for sharing the knowledge.
@chopperhehehe8 ай бұрын
Cool machine welded all my life and would love a try out . Can you tell me how much . Machine was ? Hipe your stil practicing 👍👍👍🏴🦕🦄😁🤞✌️
@joshuapoelke65128 ай бұрын
This is a rad channel. I'm enjoying your content. This video was the kind of stuff I've been wanting to see lately. Keep killing it man!
@romeo0329828 ай бұрын
I’ll be following along to see what you do with this I love the easy clean up on the rust that’s awesome honestly you could start a business on just offering cleaning like that in my opinion now water no sand would perfect
@halamkajohn8 ай бұрын
i replaced mosfets in the induction heater board kit. not exact and just popped. i will try another board at 7 volts. the newer mosfets use a positive voltage to start conducting. john fron 1960's torrance was burning a tube of aim toothpaste. i think he worked on led screens. probably unloaded a shipload of color chemicals. i have an attempt at running a 60hz inverter. i burned out an early inverter trying to run a small microwave.
@Simon_Rafferty8 ай бұрын
Could you show us what the cutting is like? Like you I have a plasma table - but wonder if one of these could give me better / finer cut quality, particularly on small parts?
@philoso3776 ай бұрын
Like TIG welding we need filler material. For larger gap can we increase the filler rod feed speed.
@DemopVWgarage8 ай бұрын
Cost?
@abruptlyblunt8 ай бұрын
honestly i'm glad to hear it's not just another scam from china and it really does weld, seeing you wack on that weld with a hammer and it not break was very impressive, i was sure it was going to just snap off.......
@zenpro81648 ай бұрын
glad your honest about your review, I would buy it for thin material...
@okobloko8 ай бұрын
The second I saw those "welding glasses" I winced. It's the same crap they send with laser cutters. Please buy goggles which are matched to the wavelength of the laser.. and get quality. You only get the one set of eyes.
@3rdpig8 ай бұрын
My understanding was that you let the wire push the gun, is that not true? They do seem like their best application is perfectly fitted joints, tiny welds, no warpage and high speed.
@RG-gn1ln8 ай бұрын
Thanks for the video. Can you weave the Lazer to fill the gap? Also, can it weld aluminum.
@teeanahera89498 ай бұрын
*LASER light amplification by SIMULATED emission of radiation
@pejoka4 ай бұрын
Hahaha! I’m sure you meant STIMULATED, not simulated.
@dmitribovski12928 ай бұрын
How much was it?
@Trial-N-ErrorFarms-jk9iz8 ай бұрын
6:06 Wrap that corner like a true welder! This machine is good for manufacturing small parts on a production line, but the average welding shop wouldn't need it much. Have you considered getting a manufacturing contract for small thing and hiring someone to run the laser welder? Then you can GO FISHING!! Yeah, I am going to give you crap about that from now on.... Love the channel!
@Raul281538 ай бұрын
it'll be interesting to see how you experience the life cycle on the fiber optic element.
@bryanmcleod93468 ай бұрын
In my experience, tool/machine life is directly influenced by the chynesium content.
@GrouchyGarageTips8 ай бұрын
Thanks for letting us see what its like!
@crebbsjd8 ай бұрын
Pretty cool. I wish they would have better written instructions for English and translation of parameters for what our welders are used to seeing. More extensive welding and NDT testing would be cool to see. More videos. It's pretty interesting. Good job.
@Metalcrafter8 ай бұрын
Thank you for the review. Very informative. Can you weld aluminum with this welder?
@chiassonsmoke8 ай бұрын
Yes you can!
@yankovalsky76968 ай бұрын
Welds probably any material that can melt.
@chrislingham7578 ай бұрын
Hi what is the cost of this an can you buy here S/Africa.....cape town???
@elsabadenhorst97468 ай бұрын
@@chrislingham757 Jy kan dit invoer. Google dit net en let op na die invoerbelasting ! Die masjiene is noggal duur en nie die moeite werd nie. fluxcore is maar altyd n wenner. Tig is natuurlik n goeie keuse as jy regtig n netjiese sweis naat wil behaal
@quickquote15688 ай бұрын
What brand is this laser welder? Thanks
@dpjazzy158 ай бұрын
That would be great for welding large steel and aluminum tanks. Even welding some thinner pipe. Maybe joining copper tubes?
@NextEraCustoms8 ай бұрын
does it cleans and how low and it go on watts i just ordered one for auto restoration paint and rust removal and i am curious how low in amps can you get and how is it going to work and not warp the auto panels.
@paulnewton9438 ай бұрын
I'm now following your channel. I want to know how many watts you have purchased and how much. And see what it is capable of in your hand. Nice work on your channel too by the way
@NextEraCustoms8 ай бұрын
@@paulnewton943 1500 watts and it was 52 I just placed the order
@NextEraCustoms8 ай бұрын
@@paulnewton943 it has the Hanwei controller it has several different features yours does not have. I can't wait to have it in my hands
@dustup22497 ай бұрын
LKaser weldingdoes not rely on grounding. The gap welding required manual circular moveement by the operator or thare are also guns that have a very small rotating / scanning prism that rapidly span gaps as the operator manually sweeps a handheld .045" non flux core welding wire media across the gap to maintain a puddle hot enough to cause penetration.
@g41thomas8 ай бұрын
How much this unit costs
@donaldsullivan69798 ай бұрын
Cleanliness isnt as critical with laser welding as the laser is cleaning too. When you have gaps, use filler rod if needed, if its a smaller gap then thicker wire can help too and you set the laser to span the distance. As with anything, its all about learning how to use it
@blokin50398 ай бұрын
More info on the machine itself would be appreciated.
@swish1onu6 ай бұрын
great video... always wondered how good those laser welders worked...
@RichSobocinski8 ай бұрын
Um, how much is it?
@scottjenkins60316 ай бұрын
Hi what was the price of the unit that you bought and were did you buy it from . Thanks Scott
@Pocketbassist8 ай бұрын
If there is a gap can you use a bigger wire? Also I heard you can make the laser swing wider.
@juiceofsapho6 ай бұрын
Great vid 😊 Do you need gas when welding? I mean what is the advantage over standard mig?
@danmarley29265 ай бұрын
Better than MIG, TIG or any of those prehistoric methods. This is the future of welding. The gases used are nitrogen and argon.
@ericthecyclist8 ай бұрын
Could you solve the gap problem by putting a length (or two) of wire in it, and welding on top of that?
@aavantrhec35208 ай бұрын
I think you may've found your niche for KZbin content, views, and exposure my guy. I noticed those numbers from the laser video. 😆 The more views you get, the more toys you can buy for the shop... show momma that ROI. She'll be happy. Keep it up man.
@sigmawarrior.fokeryou8 ай бұрын
There's no much real field welders out there with this toy to show, and make a true opinion on this machine. Keep videos coming... Try different things.
@aavantrhec35208 ай бұрын
@@sigmawarrior.fokeryou Ya, I know he's not the first, or only one to do a welder/welding review video.... but that doesn't negate the fact that this video has become his most successful one he's ever created. Its gotten crazy engagement and views compared to anything he's ever put out.
@richardfuhr71658 ай бұрын
If I'm not mistaken you can set up for a wider pass to weld with.
@LFo-z1q8 ай бұрын
Ive done some tig and gas welding, this is kind of impressive and looks almost as clean as tig. Wonder if there would be a cutting attachment as a bonus for an all in one unit, that cuts cleans and welds.
@Diesel357..8 ай бұрын
How much does one of these things cost? and where do you buy them from?
@davewarrender20565 ай бұрын
Could this be used for repair of military vehicles like tanks or apc
@mckenziekeith7434Ай бұрын
How dark are the glasses? Can you see what you are doing before you start the laser?
@lnr122417 ай бұрын
I'd like to see it on 1/4 inch plate. Something that won't need as easy. Although that was a solid weld
@charliesaba98518 ай бұрын
Everything you are welding is very thin. How thiick will it weld? Why are you pulling rather than pushing?
@emmittbishop47838 ай бұрын
They should definitely do it but I'm diggin that 300 render just as much, if not more.
@douggolde75828 ай бұрын
Light travels in straight lines. There’s nothing to absorb the energy in a gap. No ground cable and no UV radiation. Safety glasses must be made for the wavelength you’re using.
@Scott_A8 ай бұрын
If you were able to get the bigger tips and wire id would be great to see how well it works on the gapped joints
@contractorwolf5 ай бұрын
what did it cost?
@justinsymanietz3875Ай бұрын
They are like 8000
@conradowen5416Ай бұрын
His was 5k
@limabravo606519 күн бұрын
I know that's a good chunk of change but just a couple years ago these things were in the 5 to 6 figure price range. The thing I don't get is that it still requires the same things that a quality welding machine would use, the only difference being the use of laser light instead of an electrical arc, it just doesn't seem like there's an advantage to the laser outside of that rust removal feature, build an inexpensive version that just does rust removal and im all in
@bennyherrera6550Ай бұрын
How much was this piece of equipment?
@steveobaba17 ай бұрын
Thanks for your reviews, but I guess if you use some thicker wires than the one you currently use it should be able to cover the gaps who knows...
@ByDemonsBeDriven8 ай бұрын
Nice introduction! Can it weld other metals, like aluminum or titanium?
@stinopharan55288 ай бұрын
All i see is lead welding, other videos as well. I wouldn't this welding machine unless you house roof repair.
@ByDemonsBeDriven8 ай бұрын
@@stinopharan5528 no lead here
@Shueysstuff3 ай бұрын
Did you ever solve the welding of gaps?
@clydewater7 ай бұрын
What was the price tag to get the setup that you were demoing in the video?
@DonNixon-mv7mi4 ай бұрын
Are their welding procedures.
@doranmaxwell17558 ай бұрын
I am a hobby welder.. meaning my hobbies require some welding once in a while. I have a gas mig and a 110 stick welder. neither of which I could have afforded 30 years ago and both smaller than anything then. they work fine. I will get a laser welder if the cost goes down enough before I die. One small weld a week is a lot for me...I have to run test welds every time cause...well... I forget this or that. Both of my welders have some sort of basic chart. that works for me.
@claytonblanchard44518 ай бұрын
Could you weld like TIG using it as the torch with a filler rod?
@darrinjones93878 ай бұрын
You can try. It has a spot function. You can tack without the wire or use a nail if you want so long as it is shielded with gas