Chiller Load Calculation | Load Capacity | Animation |

Chiller load calculation determines the cooling capacity required for a chiller to maintain a desired temperature in a specific space or process. It essentially estimates the amount of heat the chiller needs to remove to achieve this.
The primary formula used for chiller load calculation is:
Q = (m * ΔT)/24
Where,
Q is the heat removal rate in Tons
m is the mass flow rate of the cooling fluid (e.g., gallons per minute)
ΔT is the temperature difference between the entering and leaving chilled water (degrees Fahrenheit)
BTU Meter Explained
• BTU Meter Explained | ...

[@TanveerKhan-hj9lp]

Thanks Sir for uploading this video, I learn alot from your videos 😊

[@zebralearningsenglish-pn6fl]

It's my pleasure ❤️

[@smritidasmahapatra7950]

So informative thanks sir. Please explain the function of bypass valve and how to maintain delta t..? And explain different chiller particle issues ...

[@balajic8907]

Can pls make video cooling tower parameter tds,ph,condtivity,ect

[@safwanchappu5560]

Primary pump and secondary pump video apply

[@zebralearningsenglish-pn6fl]

The video making is in the process. Will upload soon.

[@faisal-hw5cm]

Very informative video 👍👍👍

[@zebralearningsenglish-pn6fl]

Thanks a lot ❤️

[@srinivas9391]

Thank you sir for your information 🙏

[@zebralearningsenglish-pn6fl]

Always welcome 😊

[@srinumaradana9971]

Why we take 2867 gpm and gpm 2867 number constant for any tr caliculation of chiller

[@zebralearningsenglish-pn6fl]

No, that is the water flow rate. We used that value for an example. The value will vary based on the flow rate.

[@user-so9yi9py1i]

Hello, can you send me a link to the simulation program for cooling and heating systems?

[@vikrambabu4720]

Hello thank you for the good video and why we divide it with 24? Could you please know me. Is it for 24 hrs?

[@zebralearningsenglish-pn6fl]

Yeah, I will explain it in a separate video.

[@vikrambabu4720]

Hi Thank you and you efforts are much useful to the learners like me.

[@zebralearningsenglish-pn6fl]

@@vikrambabu4720 Happy to help always 😊

[@elanchezhian.selanchezhian2374]

அருமையான பதிவு, நன்றி.

[@zebralearningsenglish-pn6fl]

மிக்க நன்றி.

[@Rps945]

Hi what will be the District Cooling plant load requirement for 20000TR

[@user-qs8yf4rq5d]

Explain hot gas bypass

[@zebralearningsenglish-pn6fl]

Sorry for late reply. I will make it soon.

[@achmaddermasyafii6861]

The calculation of ∆T is from condensor, righ? Can we calculate ∆T from evaporator too?

[@kennethlobo4420]

How do u derive 12.1 multiplying factor?

[@zebralearningsenglish-pn6fl]

12.1??? 12.2°F???

[@HVACengineer93]

1TR=2.4 gpm not applicable here 2867 divided by 2.4 should be the load on chiller approximately

[@zebralearningsenglish-pn6fl]

TR is rate of heat transfer and GPM in rate of water flow. So we can't compare these both values. And we have derived this formula clearly in a separate video. The link for the video is below. Chiller Load Calculation Breakdown kzbin.info/www/bejne/fITXaHRqq76Ijdksi=B1cMVHko79OvMG6e

[@tohidkhaji]

526.5 kwh Please reply

[@zebralearningsenglish-pn6fl]

Good...👍

[@prakashksp2918]

Please update video in Tamil Please

[@zebralearningsenglish-pn6fl]

Yeah sure, I will upload soon.