Chimera 7 Over Lake Long Range Test 17 Km from Home (FPV)

[@kgg8188]

very impressive.....I second a video of your setup

[@diverFPV]

Thanks . I'll try to find some time to make one

[@여-n8f]

You tried 40km here! Terrain and landscape. Which country is it? There are two people next to you today too.

[@diverFPV]

It's Greece . I always fly with company when I make long range flight.

[@kardady]

you are an amazing pilot

[@marcterryjadal6520]

💪😍👍

[@andreard267]

EXCELLENT

[@Repter75]

Do you have a video of your servo control setup? It was cool to be able to look down without losing altitude at 17:35.

[@diverFPV]

Thanks . Here is an experimental version with the old air unit kzbin.info/www/bejne/j2fJhGdsnbV1qLc . Now the gears are much smaller and I use a TPU belt for the transmission . I'll try to find some time to make a new video on that . Take care

[@atgfpv]

🚀

[@konstkarapanpro]

25:56👀

[@brianchen3093]

What modification done to Chimera 7 pro?

[@diverFPV]

Take a look at community tab in the channel

[@Binkoro]

I thought the O3 air u it had a 10km limit

[@diverFPV]

No. It's about 23Km

[@wonderbucket1242]

How can the altitude be 11 meters? It looks more like 1100 meters up

[@diverFPV]

The altitude is in relation with the home position , not the distance from the ground . In order to do the test , I chose that location so that the flight path would be a "straight" line and the power lose to be minimal. The elevation difference between home position and the lake , is less than 200 meters

[@Flying_Wild_Boar]

Amazing flight. What setting are you using on your o3 unit I’m getting Max 3 km in straight line then the signal breaks how I could adjust mine o3 unit to go further.

[@diverFPV]

@@Flying_Wild_Boar Supposing that there is no hardware problem (connectors, damaged antenna or bad air unit) , are you flying in CE or FCC ? Are you using stock o3 antenna ? What inclination does it have ? Are the antennas on goggles directional ? Does the area has interference ? These are some reasons which can affect the signal