Toyota Tacoma Pop & Lock | Remote Locking Tailgate Mod (Install + Review)

[@tonyxaypanya6094]

Let’s be honest without this video it wouldn’t be so easy. I appreciate it so much! Best instructions on KZbin for this install. 5 stars! Thanks

[@KungFuM0nk3y]

This was awesome! Thanks

[@testuser8977]

I see a potential way for a thief to get into your truck bed if you have this system and do not hide your wires well enough.

[@donovan007007]

She gives better instructions than most if not, all the guys out there.... subscribed!

[@RAWoutdoor]

Simp

[@Jerbt]

@@RAWoutdoor accurate pfp

[@robertofranciscocarmonasam5375]

As a mechanically-inclined guy, I completely concur. Chloe’s vids are always informative and her positive attitude is contagious

[@sebastiansolis5907]

Bro for real!!!

[@peterholub7662]

This vid is way better than the one Pop & Lock has. As always, you do a great job explaining the install process. You do a good job of not assuming people know things while not overly dumbing it down.

[@kitop310]

I went with the “OEM” kit, since it wasn’t back ordered. Only complaint is it was a royal pain to get the wiring connectors through the grommet hole. But then afterwards, having a beer, it dawned on me: “Hey dummy, should’ve run them down through the floor instead of up from underneath, yeah it would’ve meant more wire pulling, but would’ve saved you a lot of cussing.”

[@desmondgarcia8630]

Beer is important!

[@johnacott7045]

Could not have completed as smoothly without your video! Very very helpful.

[@zelaznog65]

Chloe, you weren’t lying about the routing around the gas tank! I got ‘er done though!!! Thank you for all that you do to help others in our Tacoma community!!! 👍💪

[@rildain76]

***WARNING*** ***WARNING*** Running the Pop&Lock harness down the passenger side and connecting to the passenger door harness DOES NOT WORK. It’s a great idea in theory to reduce wear and tear on the actuator, but the plug and play functionality for the Pop&Lock model only works on the driver’s side. Maybe other brands work differently. Hours down the drain. 🤬

[@RogerBarrera]

Awesome video! It definitely shows how much time and effort you put into this video. I ordered one from your link, appreciate the thorough tutorial. Thanks!

[@jimecee]

First, this video is the only reason I was able to install this myself, thank you Chloe. Also I’m learning that anytime a KZbinr says “this is the tricky part” is code for “good luck this is going to be a MF’er” lol going behind the gas tank and through the frame was miserable and I see why you didn’t film it 😂

[@jamesjastrzebski1536]

This is an excellent instructional. Clear, easy to follow, and I really appreciate your explaining why you used this particular solution. Great work!

[@azpete6436]

Nice to see that the kit is now"plug and play". It was not in '18 and required tapping into the wiring harness. Also looks like the actuator and linkage has been improved.

[@ronwaterman3335]

Just installed mine. This video definitely made it way easier. Thank you!

[@plinker2268]

This is a really helpful and insightful video, thank you. Think I will take this on myself after watching. However, whoever designed the tailgate panel with different sized fasteners deserves a medal, but not for anything logical.

[@Archifx]

I really do love all of your videos. I have been doing the KZbin thing for over 10 years and what an awesome approach you have to your edit and explanation. Really fantastic job. Loved your SUSP Lift vid on the Taco as well. Keep kicking ass from a fellow youtuber!

[@ItsariJasco]

That was one of my biggest gripes about the tacoma. Well, aside of the sluggish power. But why wouldn't Toyota have just had that on the truck standard from the factory?

[@buffalobmf]

I never even heard of a truck that doesnt have a power locking tailgate. Unless it didmt even power door locks then yea id expect it to have nothing else power but i never had a super base truck that doesmt have power locks or even power windows

[@williamgiacona4240]

$$$$$$$

[@andrewv9980]

Awesome! This was the review ive been looking for! Very informational, and SHOWING everything you need and what your doing is the biggest help! Thanks you!!

[@MrJdh567]

Some 21 Tacomas are starting to come with remote tailgate lock installed. Toyota part PK3B6-35JL0 if you want to add it to a 3rd gen with a key fob.

[@buffalo241]

Yep, My 2021 TRD Pro came with one.

[@90FirstGenPGT]

Got the 2021 trd off road manual. Mine did not come with it :(

[@samesame620]

Installed PK3B6-35JS0 (short bed) on my 2020 Pro, super easy!

[@MRLEE-of5fj]

Installed one on my kitchen fridge today!

[@GATORADDAM]

That's gotta be the best comment ever!! My f*cking ribs hurt! Hahahaha.

[@tein7270]

I always wanted a pop n lock but toyota came out with their oem version recently so i opt in for the oem. I can say that it works with all model with keyless (currently on my 2018). The oem one is definitely sturdier and quieter compare to pop n lock

[@cosmobalderrama4419]

How much was it?

[@tein7270]

PK3B6-635JS0 is the part # for the short bed model 2016 and up.

[@desireevillanueva575]

Yes, like the OEM better!

[@franci8766]

It's a premium cost over other non oem, but it's well worth the extra few bucks for better quality, smoother and quieter operation.

[@chrisshaw2754]

Francis Kun 😂

[@0415jjttll]

I just installed the same thing on my Tundra yesterday, and definitely one of the best upgrades I’ve done so far. Glad you got the newer T-connecter because it was a chore figuring out which wires to connect into.

[@johncart100]

Would you be interested in drivers side grab handle and pillar 16 and up did not come with drivers side this one is oem matches passenger side have 10 available 100 00 each

[@stevetoeniskoetter7000]

Thank you, your video was very easy to follow and made the job simple. I want to comment on the tailgate wiring harness and body wiring harness. My truck is a 2023 Tacoma double cab (4-door) with 5 foot bed. I didn't use the tailgate wiring harness. The body wiring harness was long enough with about 8 inches to spare. This way I didn't need to have the two harnesses connecting under the truck.

[@Jason56B]

Theres a DIY version you can look up. Bought the lock motor off ebay $9 for both motors shipped. There are hundreds of people running the DIY setup. Had mine for about 3 months and still working great plus i still got an extra motor in the side

[@chrisshaw2754]

Yep. I did mine two years ago and spent 20 bucks on parts. Still have the extra actuator somewhere.

[@ChloeKuo]

Nice! I should have checked out that option

[@johnyoung5482]

Can you provide a part number or link? Thanks

[@bricks-mortar]

(remote) "won't effect how manual key works". Hmm. So, if the "manual key" is in LOCK POSITION, will the remote key fob UNLOCK the tailgate? Just wondering works.

[@JacqueDuck]

Great, you Need to Add the part # 66140A for the installation of the struts to install the system for Any Toyota Truck. Grumpy Old Vet👍

[@johnsalsiri8030]

What does that tail gate harness control prior to you replacing it . Only asking because I’m worried to play with things when I’m still under warranty

[@Nick-ji9ii]

Thank you for this video! Made installation super easy and smooth. Really impressed with the lock so far

[@makamakalena3464]

One of the best investments I made for my 3rd Gen.

[@kidamere2408]

you mean then taking the 5 seconds it takes to lock it with a key what a waste of money

[@makamakalena3464]

@@kidamere2408 a waste of your money.....not mine lol.

[@kidamere2408]

@@makamakalena3464 bruh you sepnding my money again, we have talked about this.

[@patrickwade3150]

@@kidamere2408 very convenient if you have your hands full, either touch the door handle or just the button on the fob. Plus you want to make sure everything is locked as you walk away, hit the button again.

[@MOJITO88]

I noticed that you did have a lot of cord to tuck after you finished. Is that because you have a short bed truck? I have a 2017 long bed Tacoma Taco.

[@das2190]

Anything with wires and cables and plugs, huge nope for me lol... I am not that inclined. I'll just continue to use my key.

[@fskrisfx]

I’ve been wanting to put one of these on my truck for a while now! 👍

[@josephmiller4239]

Has anyone tried this on a 2022 TRD Off-road model? The ones I’ve seen say it completely replaces the handle and latch, not like this video shows it only replacing the lock mechanism.

[@johart789]

They've improved that kit! I had to scab into the wiring on the passenger side. There was no harness. I like that a lot better.

[@richnichols9135]

Jo Hart, you are right. I had to do the same on my 17 about 3 years ago. The cost of the new kit has gone up, but probably worth it for the value added. Improved tailgate mechanism, tailgate plugs, and plug and play harness - all good.

[@stevec5000]

I'm starting to regret getting a PopN Lock kit for the Tundra! This is a terrible kit, why are there no directions and a long cable with no connections on the end for the plug n play harness? There is a white plastic plug that I suppose is to be used to connect it but no pins in it? And where does the plug n play harness go?

[@TacoDave2019]

What happened to the salvaged Tacoma TRD Pro you were working on?

[@ChloeKuo]

It’s still a work in progress, as the transmission is having major issues. I filmed some update clips, but it’s not enough for a video. Working on making some time to make a full update soon though! 😊

[@topsyball1049]

WoW, your system you installed is much better and easier than others out there. I hope your viewers appreciate your video and make this one their purchase. Thanks for the great video.

[@mrallen609]

I bought the manual version before I saw this video. This is cool but not worth the hassle although she makes it look super easy.

[@dougmaccoll7564]

The Toyota OEM from Sparks Toyota is only $142.....a no brainer IMHO!!

[@javis1873]

Hey chloe, nice video! Its a very useful mod which i did on my 2016 tacoma, i bought an unbranded motor though and its working great for about 3 years now, one hint for everyone and even you, i did the wiring on the passangers door so the actuator isnt locking and unlocking everytime you step in or out of the truck, only difference is you have to press twice on the key fob to unlock the tailgate. Keep up the good work!

[@rildain76]

Man, that’s a great idea. Wish I would have read this before I ran the harness all the way past the fuel tank. That was a serious pain in the butt. 😢 Update: I undid all the work to run the harness to the driver’s door and rerouted to the passenger’s door and then the Pop&Lock actuator wouldn’t work. Now I wish I hadn’t seen your post at all, lol.

[@rildain76]

***WARNING*** ***WARNING*** Running the Pop&Lock harness down the passenger side and connecting to the passenger door harness DOES NOT WORK.

[@MyF1Scuderia]

so now you have to have 2 key FOBS? the original key W/FOB won't unlock the tailgate, only the doors

[@guywhosleepallday8194]

Pop&lock is garbage. Super loud, not my cup of tea. Not my truck I was just throwing out my opinion.

[@brianbooher7138]

Does it unlock like all the doors when you put the truck in park? That way I don’t have to turn my truck off when I want to load something?

[@shawnc3030]

Great job on your install! I went with the OEM tailgate lock and watching your install made me glad I did as I prefer the OEM.

[@Timmytom16]

This should be one of the FIRST mods you should do for your Taco! I love mine!!

[@stevenkhan4344]

Can’t see bec hand is in the way. I don’t have a 10mm bolt. But maybe if I could see better I could tell

[@mocyr67]

Chloe...Will the Pop n Lock work on my 2022 Tacoma Limited? MCyr

[@haroldjackson6848]

Does the wire run down the driver side or the passengfer side. I have seen videos with them running the wires down the passenger side. Which is it?

[@stevenkhan4344]

Well can’t see what you’re doing bec your hand is in the way. Camera work is poor.

[@Tacorice]

On my 2nd one in 4 years.... the 2nd one the connections always come loose inside the tailgate .....👎🏻

[@ezekiel5170]

Love the Taco enthusiasm🤍 It be cool if it would open w/the remote🫶🏻

[@seanpuello]

If only we can take the real key somehow and modify it so it's not a stickout key like that. Make it more modern...

[@mario7232]

as someone who just got their tailgate stolen 2 days ago, wish. I would I’ve seen this sooner lol

[@TygerBlueEyes]

some sponsor should setup and send you a mechanic plastic creeper board so you dont have to lay on the floor.

[@alejandrogarcia6835]

Pretty easy to open it’s just 16 bolts 🤣 it just sounds funny

[@stevensrspcplusmc]

I laughed, when you said , it’s only 16 screws 😆

[@bhongkyle]

Is this gonna fit on my tacoma 2022 limited edition nightshade?

[@alexgarcia3900]

I just got mine and it only came with one fuse. Is that normal?

[@Smalls1000]

Does it also unlock the tailgate from the unlock button inside?

[@zachfeeney7919]

Is there another link the one in the description isnt there anymore, thank you!

[@kable2918]

Anyone else think she looks like the Forensics actress from Lucifer?

[@danielduron6131]

Chloe how is this install working for you? Is it still working good?

[@feeling_lucky_4560]

I assume it will work on the 2022 it says its not compatible

[@joecerda630]

Mine didn't come with the connector on the long wire like I see in yours

[@homesbyjeffblack]

Oh almost forgot 2016 Tacoma 215,000 miles

[@IFLTW]

My pop n lock Barnes with the 10 pin connector has more wires than just the green and blue. What are they for and can i just leave them unplugged?

[@Nick-ji9ii]

Are you talking about the wires with metal tips encased in plastic? Connect the green and blue all the way through. You can leave the rest of the metal clip wires unplugged. The other colors (I think) are just to make it universal

[@ICanDoItMyself]

I went with the oem kit because it's plug n play

[@cory5233]

I had no idea my tailgate didn't lock with the fob

[@stingr1971]

Toyota makes this and it's better than the pop and lock

[@WJr_88]

Thanks for the information and install video!

[@EdwinCV-dh8qc]

Great info ,with a good video thank you.

[@JosephJaneth]

your a 10 haha

[@randomstuff2607]

Here is a $8 version, works great. kzbin.info/www/bejne/mHOoq5Z-lpineMU

[@streetglide2245]

I like your key fob cover. Where you get it ???

[@nizmo3fiddyz]

Leave it to toyota to not add the most simple crap

[@blackpantherx4019]

Chole how much do you charge to install ?

[@isamora4685]

Wow you're impressive on what you do

[@ceeIoc]

Does this work with the touch lock/unlock?

[@FranciscoGalicia]

Do you think the OEM is better than this? Thanks

[@JimmyMakingitwork]

Need to do this on mine, pulling the key out of the remote is a pita.

[@daveb7476]

This is one of my favorite mods. I ended up tapping into the rear door locks, so the hatch locks on a double click only. This will help with wear and tear, as well as, keep the noise to a minimum. The pop and lock can be loud, but the noise can be remedied with some sound deadener around the actuator. Thanks for the great videos. Please keep them coming.

[@ChloeKuo]

Nice! I had never thought about tapping into the rear doors, but that’s a great idea!

[@ngallop]

Hi Dave this was my thinking. I haven't installed yet. Are you aware of any instructions on how to tap rear vs drivers?

[@daveb7476]

@@ngallop There are a few threads on tacomaworld and a Taco Twonz video on how to tap into the passenger side door. It may depend on the year of your Tacoma as to the specific wire colors. I would bounce any info you find against your model/year wiring diagram which can also be found with a quick Google search. All the best.

[@ngallop]

@@daveb7476 thank you Dave. It looks like twanz does have a video here. kzbin.info/www/bejne/m5nMhGt-i7mFocU I believe the new pop and lock comes with harnessing for plug and play. Thank you again.

[@mccringleberrydoritos2537]

Awwwe she said Makita gun, how cute ☺

[@KevinBarry-s9m]

Awesome job 👍👍👍👍👍👍👍👍👍👍👍👍👍

[@hbpu2156]

Let’s go Tacoma together? 😉😉😉😘😘😀

[@tr4ilblazin]

Nice will work my 2nd gen 2005 ?

[@DIMITRY8]

Great video as always, but I paid $137 shipped for the OEM kit from the dealer which includes heat shielded wiring harness. The deals are there, you just have to invest time looking for them.

[@cbgny23]

I get it, we buy Toyota's for longevity, and for some, simplicity, but for f*ck's sake, it's 2021! There's no reason why modern Taco's, let along previous generations, don't come with a remote tailgate lock/unlock as standard OEM. There's absolutely no excuse for this. Great video though, Chloe. Thank you!

[@tommywallbanger]

Chloe you have so many cool mods on your Tacoma. Off the top of your head, about how much money do you think you have invested in your Taco. I'm on the other side of the spectrum. I have a 2003 SR5 4x4 2.7 liter Tacoma that I bought for $10,000 about 10 years ago. I had to replace my 5 speed transmission and I've added Rancho 9000 shocks. Other than that, it's pretty stock but I still like watching your vids.

[@gorditolucho1]

were do you get the key fob case is cool

[@christinapuglisi3607]

Love your videos! Am I correct that it looks like it unlocks with drivers door on first unlock? Thinking about installing on passenger side so it unlocks with passenger doors on second click.

[@luism9820]

Took me bit longer but worth it 👌

[@lanspc]

The manufacturer's website was no help. This video was pretty darn good and saved me a lot of frustration. Thanks!

[@boom-bf6wo]

Awesome video, and you made the install look easy. The amazon link doesn't work, but I'm sure it can be googled. Glad I stumbled on your channel - I'm now your latest subscriber!

[@toanho1280]

Just did my 2023 passenger door gray and purple wire so press 2 times unlocked passenger door and tailgate love it. Thank you for your video!!

[@armanminasyan6850]

Does this work on a 22 Tacoma?

[@rubenduarte6676]

Just be careful. I was followed by theifs, they cut the power cable to the lock. When i locked it and walked away. By the time i got back. My tailgate was gone.

[@dragonite986]

Would it even be a tacoma if there weren’t any zip ties on it? Mine has so many.

[@antipfi]

Few comments for those with a 2016 taco limited. Great video btw, would have taken me MUCH longer to complete without you helping so thanks a lot. I had to modify the grommets from the kit to fit snugly in the tailgate. They have this little knotch in the bottom I had to widdle away with a knife and a side cutters. The rubber grommet used for the running the wiring into the cab; its further in under the carpet in the driver's side rear. I drilled a 9/16 bit then forced it through. I still put a small bead of silicone on underneath. I tried running the t harness to the connectors in the pillar like in the video, but harness doesn't fit those connectors. I ended up running it to kick panel. I had about a foot left of wire so all good there. Fun little project!

[@hike2024]

Just ordered this. I only cary my key fob with me (My MESO minimalist key fob as you have), so every time I need to open my tailgate I have to get my key out of the console. Your video is very detailed, and will be very helpful when I do mine. Thank you.