CHOOSE DEKS OLJE D1 TO PROTECT YOUR HARDWOOD I Owatrol Deks Olje D1 I Owatrol

Deks Olje D1, (pronounced 'decks o-lee-ay') Saturating oil for interior and exterior hardwood with a clear satin finish - protects from within
Ideal for use on new oak and tropical Hardwoods - perfect for dense wood species
Penetrates the wood fully and protects from within
Extremely thin oil which saturates the wood, literally feeding it from within
Easy maintenance - no sanding or stripping
Properties
Can be applied to both horizontal and vertical surfaces.
Saturates and protects all woods - Soft and Hard; Oily and Dense.
Excellent penetration - non-film forming.
Replaces the natural oils lost from the wood - will not blacken the timber.
Transparent - Enhances the natural grain of the wood.
Deep penetrating, stabilises the wood - Protects against moisture ingress.
Easy maintenance - no sanding or stripping.
Used alone, gives a silken matt finish or overcoat with Deks Olje D2 for a high gloss finish
Where to use
Hardwoods and Tropical Timber : Teak, Mahogany, Oak, Chestnut, Movingui, Ipe, Bangkirai
Softwoods : Pine, Larch, Spruce
Exterior : garden furniture, hardwood windows and doors, patios, walkways, boat decks, topsides on boats, portals …
Interior : paneling, stairs, doors, windows, door frames …
Marine : Can be applied above or below the water line. Excellent primer for conventional single pack marine coatings.
Horizontal - Vertical.
Application
Apply a coat of D1 - Allow to penetrate for 15-30 minutes.
Apply a second application. Allow to penetrate for 15-30 minutes.
Repeat this procedure until the wood is saturated i.e. will accept no more oil.
Once the timber is saturated, brush out or wipe up any excess product that has not penetrated to avoid shiny spots.
Do not allow D1 to become touch dry or dry between coats (apply “wet on wet”).
Refer to the packaging for maintenance procedure.
Multicoat coverage :1 to 4 m²/l (depending on porosity)
Coverage rate for maintenance :8 to 12 m²/l
Application tools :Brush - Roller
Application temperature :5°C to +35°C
Drying :24 h.
Setting up time before use :3 days.
Clean-up :White-Spirit
📞 Contact Us: [phone]
📧 Email: [e-mail]
🌐 Website: www.igoe.ie
🌐 linktr.ee/igoe...
📍 135 Slaney Road, Dublin Industrial Est, D11 AW6D
#Igoe #ConstructionProducts #CostEffective #QualityProducts #RoofWaterproofing #MouldRemoval #WallInsulation #Cleaning #MetalRestoration #WoodRestoration #ProblemSolve #BuildingProducts #PropertyMaintenance #InteriorDesign #Roofing #Builders #HomeImprovement #DIY #Antirustprotection #Construction #Waterproofing #Asphaltmaintenance #Coatings #Lava20 #Owatrol #Zinga #ResinBound #LiquidMaskingTape #FlexTape #Liquafix