CHOOSE OUR NEXT PROJECT TRACTOR!!

In todays video we need your help choosing the next project tractor!
Cast your vote here www.surveymonk...
Hope you enjoy, any questions hit me down in the comments below, thanks for watching! G'Luck
Please like and subscribe for more. Videos every Tuesday, Thursday and Sunday.
IAN'S COMMEMORATIVE TRACTOR RUN - 15TH SEPTEMBER 2024
All money raised going to the Irish Cancer Society and Longford Hospice Homecare. Buy your entry for the tractor run or make a donation at stewartfamilyfarmlongford.com/ianstractorrun
FARMER PHIL Merchandise:
www.stewartfam...
Stewart Family Farm - Home produced beef & pork
www.stewartfam...
Telephone: [phone]
Email: [e-mail]
EirCode - N39 C6V6
Stewart Agri Facebook Page for any work enquiries - / stewartagri
Also, head over to my amazon storefront to check out products that I use and would highly recommend: www.amazon.co....
For those that ask how they can help out the farm and support us: paypal.me/FARM...
Lickd - Licenced KZbin Music : lickd.co/r/far...
Business enquiries: [e-mail]
FACEBOOK: FARMER PHIL
INSTAGRAM: farmer_phil_135
TikTok: farmerphil135

[@declanlynch1702]

Your great grandfather's 20

[@janbuikema8941]

Agree!

[@gregshearer423]

Personally a think you should spend the winter going through the main fleet giving them a good going over and just a general tidy up cause at the end of the day use are relying on tractors with big hours wouldn’t hurt to spend a few bob just putting things right that are starting to get loose

[@ernopekkala4580]

Definetly vote for this, get yuor main fleet in tip top shape firts

[@denisoregan4801]

Well put👍

[@stevennesbitt243]

There all running ur fool

[@brows1000]

Have to have some tidied for the new museum. Main fleet does need tidying up but I think that's factored in to the timeline too.

[@martinbutler4322]

Your great grandfather's wee Fergie she's already stripped time to put her back together start with the small stuff work yer way up to the big stuff get a wee assembly line going 😁 definitely wasn't a tree covering the Nuffield last time I seen it either 😮😁 amazing how a tractor 🚜 wants to preserve itself should be room in the shed when you get the Fergie out 👍🚜

[@anthony342]

2725 or 4wd 590

[@sadierichardson2553]

590 please 🙏

[@casestockman7078]

2725 would be savage to see that done

[@mjsagriculture6119]

Zetor Crystal 8011

[@beyondnow1600]

Beautiful Tractor 👌

[@catherinemonaghan7dfdgffh604]

People who want him to do the 2725 👇🏻

[@Alan-rn5ip]

Definitely

[@sambrummitt3359]

2725

[@C.w-q3m]

2725

[@SilageSpec]

2725

[@seanmcdermott6715]

2725

[@user-zi3uf4ix7m]

Simple choice - the 2725. This is the only Tractor that would be a daily usable alternative should any of the main fleet breakdown. It would be the most sensible to spend the time and money to overhaul. When you were looking to buy one you mentioned it was hard to find, so I presume there would be a decent value to a fully restored model. As for how far to go on it - if you do a job, then do it once - so full rebuild on engine and full nut and bolt restoration. The other tractors are more a passion project, that once renovated will just sit collecting dust, hence I believe the 2725 is the best option to focus on next.

[@DiarmuidKearney]

Not everything has to help the farm, some things can be purely for fun too

[@paullynch277]

@@DiarmuidKearney if they were running a low hour fleet of modern reliable machinery then you would have a point. But they are Not so I agree with original point made that their effort is best put into something they could use and make money with.

[@ThingyGoos]

The farm pays for the classics, and considering the number of breakdowns b backup classic wouldn't be missed​@@DiarmuidKearney

[@uptoyou100]

​@paullynch277 he has a farm shop/museum to think about too..those old tractors when fixed up would be nice to see

[@darrenlord5439]

Crystal 8011

[@GijsRupert]

Ferguson 20 from grandfather 1 tractor for the new museum display

[@stevenewman8465]

MASSEY FERGUSON 590 or rough terrain forklift Nutfield

[@jarnoreurink6428]

Why not the dewo digger so you have a Nice digger you can use

[@dellhell8842]

Zetor. Plenty of restored Masseys of all types around already.

[@paulkehoe371]

Please don’t think I’m being disrespectful- personally I love this channel, watch every video for the last few years…….. but, maybe you guys could sell a lot of these tractors, combines and silage harvesters? Free up a lot of room and a few pound in the pockets. Nut and bolt restoration is great but from your last videos ye have a lot coming up in the next few years, great videos, all the best to ye all

[@frankcarty]

If the 3690 needs new crank shaft, I'd get that into the workshop first. Otherwise it might end up like the 6480 or 6290! Same to see if parked after all the work and money spent on it this year.

[@brows1000]

It will be done in the next 11 months. He wants it for on the pull next year.

[@frankcarty]

​@@brows1000all the more reason to get it done first!

[@eamoncassells1658]

The crystal and the forklift. Advantage of the crystal is you have a lot expenditure coming up and it isn’t a family heirloom so you have something to cash in if money is tight

[@adamruttle7828]

8011 zetor full nut and bolt please very easy to work on 👍

[@MrShanbla]

Give us the zetor please Phil. Should be a reasonably quick turnaround vs the 1200 and give ye some heart to keep going!!! Also she's a beauty that shouldn't be left go backwards!!!

[@joinertanner]

Get the zetor up and going put her on the rake for the summer save dropping on and off the rake.

[@SpudSlingsby]

Stick to those with a story. Your dads nuffield forklift, grandads 20, the 165r. Nondescript money pits like the E27, 590 etc will take ages & cost a fortune! Petrol Nuffield & Gold belly fergie could become museum pieces without major work so tick boxes even if temporary. Recab 2725 so its usable. Is 3690 your first tractor? She maybe needs retiring, hell shes some bother, but she'd line up with the grey & nuff to show the first tractors of 3 generations? 6480 needs to go, could you part with it and the 2725 & get something better to replace both? Slurry 6290 is going to need a swap at some point too.

[@liamdunne5512]

I think the john deere. A tractor that has been in your family for years. Ferguson forsdon Nuffield ect you will come across any day at vintage days the john deere is rare and would look well in the museum

[@GeorgieRoss]

Shame the other 1200 isn't on the list... You know what you're doing now, it would take half the time... and imagine the videos with both of them on the draw ❤💛

[@matthewmckenna3186]

Lee is currently crying watching this video😂

[@johnmcmahon1553]

8011 full nut and bolt 👌🏻

[@ksmyth69]

zetor crystal 8011, all parts available new, not that expensive. Unique sounds of engine.

[@scoob3298]

do the zetor first as its quite easy to work on them which could be a bit of a project for yourself :) and definitely the 2725 after

[@Johnnycambell]

Crystal 8011 she would be a little dinger if she was done up

[@michaeljohndowney2756]

Love to see the 165 fully done

[@patscanlon4955]

Zetor 8011

[@jackoflaherty495]

I think do either the 2725 or the 590

[@TKingscott21]

How about the teleporter 🤷🏼‍♂️ something small and different unless you got a replacement for it due maybe a demo??

[@andykane9866]

Crystal full nut and bolt great work horse

[@damjord]

2725. No need for nut & bolt. Just get the cab back to what it should look like and make sure the rest of the tractor is mechanically sound. After that just a touch up of any rusty spots and new decals and you'll have a lovely useable tractor

[@DianeD862]

We would love to see your Great Grandfathers restored that would be great 👍.Great video Farmer Phil so it was .So happy Sunday a lot to keep up busy .So so good luck 🤞

[@michaelcollins1552]

The Ferguson 20 on pallets

[@liamcronin1546]

massey ferguson 165 r or the 590

[@Harry-dm7qp]

The Zetor Crystal 8011 definitely

[@keithmcdonald4949]

590 would be good to see done

[@ianwallett7438]

The 1200 would look good with a Shawnee Poole dump trailer on the back. The Zetor!!! 🙂

[@homey3051]

I would think you would want to be upgrading and fixing the equipment used to run the farm

[@gregshearer423]

They’d just want to give the whole main fleet a right going through this winter tidy them up sort out any of the stupid wee problems and just have them right cause at the end of the day there the money earners

[@homey3051]

@@gregshearer423 Ya I think that's what I said. I think it make more sense to work on the tractor in the shop that needs a new crankshaft than leaving it sit for two years while you do restoration on something you don't use. If you noticed there running old worn out equipment that something needs working on every week and that money used on restoration should be used for upgrading to newer equipment

[@robpaton9760]

Defo stick with the sentimental ones. Some of the ones 135/590 etc are always being restored Go for either your dads forklift or your grandads 1st tractor Great video

[@pencilandsharpener]

Granddads Ferguson 20 would be great for the new farm shop/ museum

[@warrenbarlow3110]

2725 or the 590

[@eamondempsey3018]

Hi Phil. I'd go with the crystal, should be a handy fix and would be a usable classic.

[@MarkRendall-f3y]

It would be the 590 for me.

[@Adrian-tj6ye]

Realistically if you got rid of most of them you could buy a couple of proper tractors and if Lee leaves there will not be another project done I’m sorry to say .. how much did the 1200 cost to restore? 20K ? I know this tractor had to be done but how many can be done economically? If father Phil would move with the times breakdown would be prevented or less common .. and we all like the vintage stuff but it will never be done when you have so many to do.

[@bren106]

Why the old stuff you may ask. If you need it explaining you'll never understand.

[@Adrian-tj6ye]

@@bren106 what ?

[@brows1000]

What is he going to put into the new business venture if he sells all the displays? 🙈

[@Adrian-tj6ye]

@@brows1000 most of them I said obviously some are going to be held onto for he shop

[@jacobunderhill4865]

2725 but and bolt it’s a usable tractor so get it to a nice comfy reliable state and use it for what it’s made for!!!!

[@stephenkelly2067]

2725 or 7610 both are usable back up yokes for likes off raking tedder etc and nice to look at

[@merlogo]

165r or the forklift!

[@RetireMentalityChallenged]

Uncle Ian Massey turned out to be just gorgeous! I vote for the little Massey that you have the cab for.

[@davidmahony6866]

You should do the 2725 and straight pipe

[@kevinjensen539]

Your great grandads Fergy 20. The story alone is worthy of the restoration.

[@rhianlawler89]

Zetor crystal 8011

[@dermotward6540]

Survey complete, hope your great granddads 20 gets the vote.

[@mickwalker735]

590. As a young farm worker i drove the 2wd from new for 3 yrs and then was upgraded to the 390T. I had the option to have the Ford 6600 instead of the 590 and wish i would have took it as the dual power was far better than multi power.

[@user-pg4ji9up8z]

Zator crystals

[@michaelcoffey8008]

Zetor

[@abbeyheatservices]

590 or zetor good rake tractors free up the big tractors 2725 would be handy for plowing ect massy digger if the jcb lays down

[@davidkeprt9433]

zetor 8011

[@johnconefrey499]

Well phill u have to do up your great grandfather’s tractor in his memory the auld 20 best little tractor ever we had one years ago

[@KevinBourke-b9j]

Zetor Crystal or your greatgrandfathers 20

[@leomcnally4999]

Nuffield rough terrain forklift or the john deere ❤️❤️

[@tadghmaw7013]

Nuffield forklift or Ferguson 20 on pallets

[@ronaldlucas5360]

I would choose the Zetor. Getting the engine unstuck and running.

[@ianhaggart1438]

HELLO... iv got a soft spot for the crystal for next restoration... a change from the Masseys ... 😊... but 165 or the biggest mf in your list... the three would be the most use in the fleet straight away a bonus.. stay safe 🏴󠁧󠁢󠁳󠁣󠁴󠁿

[@jonny3764]

Either the forklift or the 20 on the pallet. 20 once finished would look nice inside the new farm shop

[@roba4297]

Say bye bye to the 6480, and get something reliable before wasting any more money on it, as you need kit to earn money. The restoration jobs , although a happy diversion, need to take their place in the priority list. But I'm just an old grump!

[@MichaelBradley-j6z]

Before doing any classic tractor the 6499 needs tidying up then tge 590 or the 2775

[@nigelmadden2452]

The 165 or the 50 b

[@petrokemikal]

Better off do the 3690 but do it top to bottom, its obviously needs a proper rebuild, its in bits in fairness..Failing that the 8011 zetor should be simple enough to get going well and would be decent on rakes, tedders ect due to the 2wd turn radius..would be even usefull round the yard for shunting trailers about and maybe even the feeder..

[@garys4040]

590. My fave tractor from when my dad worked on a dairy farm in my youth.

[@patrickmcdermott9983]

the Ferguson 20 have history Behind as it was part off the family History on the farm

[@AislinnMalone-r2v]

165 It s a handed tractor around the yard

[@petermay2034]

Be lovely to get that 165 out the shed and I agree flatten the shed give you more space 🎉

[@jackoflaherty495]

Buy another sprayer to replace the 7610 and put the 7610 sprayer back to a 7610 tractor and restore it would be nice 😍

[@seanmoore4461]

They bought a self propelled sprayer this year already

[@BaldyBriand]

Jasus Phil some collection of vintage machinery , don’t know what I’d pick …. 👍🏻

[@seantormey3531]

Zetor Crystal full nut and bolt restore.

[@eastcorkcheeses6448]

Definitely the nuffield fork lift ,

[@RabbyB1]

Ferguson 20 🙏🙏

[@mucksavageIrl]

Grandads 20 0n pallet or forklift

[@michaelosullivan6943]

2725 or zaror or 590 because u could use them more often

[@dazsden]

I'd like to see the Gold Belly tvo get going! Have one myself!

[@roryshanahan3074]

defo do ur great grandfathers 20 be nice to have her back and running.

[@johnhurley9407]

Zetor 8011 would be a great choice

[@brown6480]

Most definitely 100% the 2725 👌 shes an absolute weapon and deserves to have a bit of love

[@briansweetnam707]

I would like to see the Ferguson 20 I just located and bought my grandfathers Ferguson 20 yesterday after 35 years

[@colmanlong1032]

Zetor crystal.

[@davidsata1]

Zetor. I seen a nice one at Longford show lovely tractor

[@madeljacky]

Ferguson 20 on the pallet or the forklift Nuffield because they both have family connections

[@HootMaRoot]

They're both great choices and the same reasoning I have for having them on top of my list

[@johnmccabe7431]

Definitely the ferguson 20

[@casperghst42]

How about an MF 65? When I was small (50 years ago) the 65 was the thing. We had an 35 Gasolin (gray, golden engine), but I was soooo envious of the neighbors who had an 65.

[@bren106]

Has to be the 20, and have it centre place in the new farm shop/museum to show the continuity of the farm down the generations.

[@agrilad5248]

Do the forklift that would look good done up

[@zacnew2688]

I'd say do a tractor like the 590 or 2725, which will be used afterwards and wait to do 1 like your great grandfather's 20 once the museum is underway so that it can go straight into a clean environment and not undo all the hard work.

[@jamesgriffiths7579]

i say the 2725 or the Zetor 8011 machines that can still do some work around the farm. 8011 should just be left in work clothes, but functional to run feeder wagon, straw blower in winter and rake in summer. 2725 should be full restoration, Masseys are your pride and joy.

[@laurencegibbs2753]

3690 tidied up, make the hard work pay for itself

[@MASSYMADMAN]

I’d go for the 2725 would end up a useful tractor. But seeing the Zetor restored would be nice.

[@andrewemerson8820]

Massey 165. As I have one. Can't get pto to engage..might see how to fix it.

[@user-ed5nn9zm2b]

I think if you put the reverse idler in back to front it will do what you said the gear's

[@Benic1991]

The rough terrain forklift or the 165R loader would be really cool to see done

[@Derry-px3ln]

Has to be the John deere and implements or the 590

[@SuperBigred86]

I think the rough terrain forklift deserves the love

[@jerrybernard6293]

Zetor crystal ,what a tractor.