Chopper Bicycle Conversion to Electric (48V 1000W Hub Motor)

Patreon - / evcustoms
Channel Support - www.paypal.com/paypalme/evcus...
EV-Customs Website - ev-customs.com
Instagram - / ev_customs
Facebook - goo.gl/tu3Qdk
Music 1) - Western Background Music // Tracks
ZitronSound - Wild West
2) - Curt Cheel
3) - Move_Out

[@electricchoppers]

Beautiful build 😎 Love the springer front end!

[@WhyNotCycles]

Badass built! Very nice file! το χεις πραγματικά!

[@bacabourke]

very interesting and helpful for peoplr such as me, who are not experienced working on e-bikes

[@RonGunnerRetzlaff]

Love your attention to detail in this build. Nice job Sir, cool bike.

[@EVCustoms]

Thank you very much my friend!

[@philippejoseph8604]

At 4:10 you should screw each spoke nut of the same amount of turns ( 5 to begin and then 5+3+2+1, etc... ) to avoid the wheel rim to "jump" up and down wich is the most difficult in lacing a rim.

[@gamerdad8531]

Really beautiful bike and think you may have inspired me with a problem I have with my big 260×160×70 so thank you

[@tonyfrewin4822]

Beautiful bike conversion. I have learned a lot from your videos. Thanks.

[@EVCustoms]

Thank you Tony!

[@autojohn-pu1vf]

@@EVCustoms Hey there EV, is that rear hub motor equipped with a coaster brake? All the rear hub conversion vids I see they are installing with derailleur setup on 1 3/4" wide mountain bike wheel. I have a nice new beach cruiser I want to put hub motor(s) on and it's wheels 2.125wide. I don't see them on Amazon... will I have to re-spoke the wheel like you did w fat wheel??? and will I have to install hand brake? TY

[@apoelalexis]

Excellent, professional build!! I want one ⚡⚡

[@EVCustoms]

Thank you mate!

[@adamoskalogeris]

As always a very clean build looks like it came out of the factory.

[@EVCustoms]

Alooooo... Thank you my friend!!!

[@user-or4vi1mm7x]

I want a bike like this for you, but I'm in Iraq

[@coachwesloc]

Freaking awesome build. I converted a tracer Santak. All I need is a battery mount like yours . Unfortunately I have no skills!

[@fajnyleon19]

Piękny rower

[@TheDaktary24]

beautiful, the birth of the new Indian Ebike

[@JohnSmith-nh3bc]

Nice frame design for a retrofitted and centered Shamrock gear array powered by even a 350watt, 100km/rad ride.

[@HeruVision-Thrive-Coaching]

This deserves a lot more likes. Challe holmes.

[@paulchristiansen7014]

agree with you about these guys, as they build rolling art

[@budrobadre]

That is awesome man. I want to build my own lowrider e-bike too!

[@joseaiartonsoaresdearaujoj4110]

The best!

[@mitsos306ify]

Great video! This was a beautiful bicycle and you made an amazing conversion!

[@Firsachi]

Talented Man!!!!!

[@TM-we6eg]

Damn that looks sweet!!! 🔥

[@topfunnyclips5807]

God bless you man you have golden hand✋.. awesome..

[@EVCustoms]

Thank you!

[@murraymadness4674]

Cool looking bike, would have liked to see you riding it. thanks

[@EVCustoms]

Yeah.... unfortunately i could not find time to drive it... The client he waited impatiently to pick up the bike when it was ready...

[@philippejoseph8604]

At 12:28 you can use a 23 mm open wrench to push outside the rubber part were you place you air so that it will inflate and free the handlebar without it being destroyed.

[@EVCustoms]

I will try it next time.. ;)

[@gugafigurinhas1026]

Show dms mano parabéns

[@TheKingdomof_Heaven-within_me]

so badass!

[@anotherworldanothertime7717]

Gorgeous!!!

[@EVCustoms]

Thank you mate!

[@alphonsotate2982]

Beautiful bike great work

[@EVCustoms]

Thank you MATE!!

[@russbarradell4323]

Great build, what length spokes did you use for the wheel?

[@leehewitt9559]

Great video. What type of spot welder do you use please and what is the BMS type in the batter pack?

[@irfanucarol]

perfect perfect perfect

[@EVCustoms]

Thank you my friend..

[@SamusUA]

Cool cool cool!!!

[@diverse.content4643]

Wonderful👍

[@frankierays]

Beautiful build… more braking power needed.

[@EVCustoms]

Already updated,,! MAGURA Brakes on Front and rear wheels

[@sebastiankasunga3693]

Nice build it looks like a Lincoln continental bike built

[@EVCustoms]

;) ;)

[@paulfasse8032]

Only thing I don’t like is the use of adjustable wrench on crank. That’s a recipe for rounding out nuts. Otherwise totally creative and brilliant.

[@coachwesloc]

What type of wood did u use for battery/controller mount?

[@douglasmaclean5836]

37:48 absolutely beautiful. wow...

[@EVCustoms]

Thank you my friend..!

[@user-wr4el5yb4f]

Super!!!

[@gamerdad8531]

Hi what was the spoke length you used on the hub motor thank you

[@rafael31358]

TOP !!!!

[@tarekgf]

Very nice job 👍

[@freakenstein1984]

Everyone building bikes but no one to make one for you

[@paulchristiansen7014]

need more new builds, should have asked you guys for a build as waiting for one from a company, it's taking them 2 years for it and they saying 2023 spring time

[@freddysoto7021]

Hello, I have learn a lot more about this skill and with no words thank you so so much maybe later I can do business be safe.🐺🇨🇷🇨🇷🇨🇷

[@EVCustoms]

Thank you mate! 👍😊

[@Holocaust_Gaza_34000_dead]

great work can you think about better solution to hide the electric wires ad what is maximum speed it ca reach

[@EVCustoms]

Hello friend, maximus speed is around 50km

[@791번지]

The bike body design is very attractive. Where can I get a bike body?

[@lol-we8os]

Hello my friend, can I install EVE 280AH 3.2V LİFEPO4 batteries to my electric bike

[@dust6242]

Hello, very nice build, have you had any problems with the strength of the dropouts of that frame? Thank you...

[@EVCustoms]

No... dropouts was perfect for rear 1500w motor

[@normanwray1341]

Hello dear .y friend good thing you are doing let your money 💰 turn over ,by building a ebike thanks sir

[@EVCustoms]

Thank you very mutch my friend..

[@tristanedwards7521]

Nice work im looling into doing low rider or a cruiser can you tell me if you build wheels for customers and do you supply the electric hub wheel in a kit that can be bought and could you tell me where i can buy a custom bike from for a good price or some company that sells low riders and cruisers that are reasonabley priced.

[@wolfbane58]

What are your pricing aspects on your models these are the Bomb brother.

[@sdz6tre]

niceeeee

[@philippejoseph8604]

Of course screwing each spoke nut of the same amout of turns takes some time but it's a gain comparing to the time of truing the entire wheel rim by acting on ALL the spokes nuts. To simplify ou can eventually screw every spoke nut at the limit to see the threads disapearing into the nuts to begin the procedure and then +3+2+1, etc... This won't give you a perfect wheel but at the globality you will "just" have to act on 3 or 4 spokes only to correct each lateral movements and also I have to say that the final bike if very gooooooooood.

[@electricbikeretrovintage]

No screwing each spoke nut of the same amount of turns doesn't make it true. It is the tension that make it true not the amount of turns. You can have one extremely tight to screw with low tension and another one easy to screw with high tension. You need a tensioner tester and set them all with the same tension.

[@philippejoseph8604]

@@electricbikeretrovintage : Yes but as I explained "This won't give you a perfect wheel but at the GLOBALITY ...." This method will avoid the "jump effect" up and down that oblige you to act on each of the 36, 32, 20 or other total quantity of the spokes. If your rim is new and perfect then you will have to finalize the truing by acting on 3 or 4 spokes to eliminate the lateral setting.

[@philippejoseph8604]

@@electricbikeretrovintage : In addition, with a spoke tensioner you can be well tensioned but with an incorrect length.

[@electricbikeretrovintage]

@@philippejoseph8604 I understand. Your method is a lazy one. You want to avoid act on each one. I set every spoke one by one with the tension testing tool. My bike has 3 motor and 3 sometimes 4 battery and 165lbs. There is a clic noise that appear sometimes so I have to retruing the front wheel frequently because of the work load put on it.

[@electricbikeretrovintage]

@@philippejoseph8604 I don't think so. I am a guitar player. Tuning a guitar it's the same principle.

[@B0JIK0B]

Силовые провода слишком большого сечения. И красный тумблер на батарее излишне мощный. А так - отлично. Осталась только выкрасить и выбросить

[@arturodisenador290]

Hermosa, creativa, sin embargo no la usaría para andar en la calle. creo que es impráctica

[@rishanranatunga4851]

What is the capacity of a lithium cell used. why didn't you use temperature sensors on charging cells to help the charge controller, it's advisable to cover the drive chain and lubricated it with grease to last longer. cabling can be drawn through the tubing if you considered more. you should have end this video with a test ride too. good luck with your future carrier ☘

[@alexmaslove4841]

Добрый получился электровелосипед ! А сам чоппер кто делал, не нашёл в видосах?

[@axelthorfilms]

Why do you not show the mounting of the rear wheel?

[@omanganteng5697]

how many kilometer the battery need to refuel again. thanks

[@carmencarrasco4714]

This bike is almost perfect. It was very easy to assemble. kzbin.infoUgkx2YFGCCEkXKgqCOH-7vlvgb4L4hg4IrXI The fit was great as well. I am 5'11" and 160 lbs with a longer torso and rather shorter legs, and 55cm is a perfect fit. Every component seems to be pretty decent and durable except the rear wheel. It was a bit lob-sided and also the freewheel component is either missing a ball bearing or under lubricated, which prevents the wheel from rotating freely. Because of that, it requires more pedaling and also climbing hills a lot harder than expected. Other than the back wheel, I like everything else about it. Affordable and well-built.** UPDATE **It turns out the sound was caused by the tight chain tension. Once I loosen it up by moving the backwheel a tad bit closer to the crankset, the sound went away.

[@snoopysador]

Hi, could you make a video about replacing ball bearings on the inside of a hub motor?

[@EVCustoms]

Hello friend.... i have it already..

[@snoopysador]

@@EVCustoms i found it thanks :)

[@ericlakota1847]

Nice I was wondering what u did with those fat hims you made

[@EVCustoms]

What you mean?

[@haroldgibson4191]

My spokes on my bike came off I wish you could reinstall mines

[@acerview77ctre]

We purchased this Vivi 27.5” electric bike and a Tentaquil 26” electric bike for our 13 and 14 year olds. kzbin.infoUgkxUiL0GnyDjP32RJdd660sP8mZk4CRLTCJ The Vivi was much easier to put together. With the Vivi, there was a video link to assist with assembly which made the process easier to follow (we did put the handlebars on upside down, but it was a quick and easy fix). With the Tentaquil, the assembly was not as simple to follow, but after we messaged the company for an assembly video, it was easier and they did respond quickly. The other major differences were that the Vivi has a grip throttle on the right handle (like a motorcycle) and the Tentaquil has a push throttle that you use your thumb to activate. The monitors were also different, so if you’re looking for something specific in terms of changing the bikes functions, pay attention to what the monitor offers. We were really impressed with the overall quality and functionality of both bikes, but if you’re looking for more power and an easier assembly, definitely go with the Vivi!

[@taiwanyuyu]

很美

[@aarongallani9799]

once again great work. i have a question I have a Voilamart hub motor 1500w 48volt, i have upped the battery to 72 volts which controller shoiuld i use.

[@EVCustoms]

Hi... 72V 35-40A controller is good option for performance...

[@aarongallani9799]

@@EVCustoms would you recommend a brand . I get all confused on aliexpress

[@EVCustoms]

;) :) on Ali everything is Chinese no name brands.. but is not mean that is poor quality there... so don't worry about it.

[@aarongallani9799]

@@EVCustoms where do you buy your controls, i am in Australia. But the world is only a click away.

[@aarongallani9799]

I was also thinking of installing a front wheel motor same sizes as the rear motor 1500w. Can it be done and run in all from one throttle.

[@turbulenttuesdays4826]

You should wire the front hub so it's in permanent regeneration mode and never a motor. Hey presto constantly recharging when in motion. Wanted to try it for years! See how far you can go without plugging it in??

[@clixium]

it doesn't work that way, the bike would consume more power than it would be able to regenerate meaning lower speed, acceleration and less range

[@DexBerry]

where do i get that bike frame?

[@Korvvs]

TSP Cycle Farm

[@mihaisamaila7646]

No drive test footage makes this feel incomplete... ...too bad considering the excellent quality of the build and build video.

[@EVCustoms]

Unfortunately... the client was so excited with the project, he couldn't wait... so that's why i couldn't make the video with a test drive...

[@mihaisamaila7646]

@@EVCustoms sometimes it happens like this... Why did you choose to build the battery when there are batteries already built? You didn't trust the elements in the ready made batteries?

[@EVCustoms]

I always build my own battery packs, for sure don't trust any battery pack from internet! you don't know how many years they are in werhouse before they send it to you, you don't know the quality of the batteries, you don't know if they are balanced and most important is that you don't know how safe is the battery...

[@mokann7453]

If the controllers has low/hi brake whats the point of still having a rear disk ?

[@omarstephenson7000]

The rear disc acts as a failsafe if something were to ever go wrong with the controller. Better to be safe than sorry.

[@murraymadness4674]

The motors can't hold the bike stopped, can only slow it down.

[@noka7776]

13S-5P battery pack???

[@Re-cycles408]

❤❤❤

[@SebitaLugano]

Y si se quema el fusible hay que desarmar media bici

[@fredfullilove5688]

really nice bike ! what's the name of that frame

[@EVCustoms]

Yeah... i don't know the name of the frame,, but i know that is Italian style chopper..

[@foreversolvent5334]

is that a 20Ah battery?

[@romeocorvinus3465]

22:26 the way the white figure outside of the window moves, doesn't look natural...

[@user-wj1ze7mw9g]

люди подскажите где он такую вилку взял?

[@hermanbarbaantelo8508]

como puedo acquirir una bicicleta asi o el costo usted vende

[@lorenzoparra6192]

where can i find this 1000w brushless hub?

[@stockey]

Alibaba.

[@FightFilms]

Your handlebar isn't clamped down correctly.

[@JaboodyEnthusiast]

How much do you charge to make something like this?

[@EVCustoms]

Job + e-bike kit + extra custom builds with 2 years warranty on electronics... about 1600euros

[@Azaakiel20]

the battery is pretty small for a 1000w motor..

[@zecsabbath7160]

será que andou ????

[@user-tp7uq1cn4v]

No test drive?!

[@EVCustoms]

Unfortunately this project finished on first lockdown...

[@bossqueensurvivor7583]

Hey is the bike for sale?

[@bossqueensurvivor7583]

Let me know if the bike is up for sale thanks?

[@doctor1faust]

omg

[@EVCustoms]

Hi... frame plus 1000W conversion is about 4800euros

[@federicopolano5691]

En prese o nabtes las visis tunig

[@christianwhite1771]

Looks mad AF, great work, have you got a link where can get a frame the same or similar

[@AddictRC]

Can I buy this chassis?

[@EVCustoms]

Yes.. from Italy..

[@user-ns4vl5tk6m]

Як правило все те що гарне-не практичне( Проїздити на ньому сезон 7000км і 2+метра цепка перетвориться на 3метра і буде аж на вухах наїздника. Так що тільки для старих пердунів яким нікуди швидко не потрібно їхати і нічого везти теж не потрібно...

[@dannydyer2879]

Looks heavy doubt the battery lasted more than 40minutes id say top speed 18-20mph looks good just heavy bike

[@wolfbane58]

Are you selling any of these models , these are the bomb Brother you know you’re shit!😎👀✌️👍

[@EVCustoms]

No.. unfortunately this conversion made only for one person (client) ;) thank you mate!

[@gabsab5443]

Hi, First of all, please excuse my English. Now I gonna explain the problem to you : I have an electric scooter SPEEDWAY LEGER LITE when I put it on a chair and I activate the accelerator to make it run without anyone on it for a few minutes everything works fine, but when I'm on it, it rolls a few meters, it suddenly brakes and stops moving forward, it looks like the brake is activated on its own, the first time it happened I wasn't expecting it and it's really scary because I was driving at 35 km/h, I almost fell, I was very scared and and when I came to my senses, I wanted to hit the road again by activating the accelerator nothing does not happen, it did not want to move and when I push it, it looks like the rear wheel(motor wheel) is semi-locked, I manage to push it but with difficulty, I have to turn it off and turn it on, now the rear wheel(motor wheel) is unlocked and when I activate the accelerator again it starts and rolls but It will do again the same thing I described above, therefore impossible to use it normally since it stops every time when I want to ride with it Hope you can help me solve this problem. Thank you in advance for the help you are going to give me. PS: I changed the batterie with a new one, but same problème Codially Gabriel

[@balloney2175]

You did not test drive.

[@josecolon6584]

I dont even have a table to work on.So I buy from 🇨🇳

[@gilmarsardinha3150]

andar mesmo nao vi ne ???

[@user-yr5cu1xk4z]

Τιμή ;

[@EVCustoms]

Giati..? tha pouliseis to kormi sou?😆

[@chetandalvi3372]

Muje chahiye ye cycle kitne me doge bolo

[@royganjar4615]

lieur

[@Fromard]

Another build video that doesn't show the object in use once completed.

[@EVCustoms]

Sorry about that... i format by mistake last records...

[@user-ks6zu6vn9j]

Эфектно, но не эфективно. Не жиснеспособная модель. Педали сильно не покрутишь. Нижняя труба сотрется на горках и ямках в течении года. А куда брызговики вешать? В общем настоящее исхуйство.