Traxx 186 Tutorial 4: Cold Start And ETCS Staff Responsible Mode

[@A320Virtual_Captain_Pilot]

Hi Chris, what about.... is a wonderful project! I can't wait to buy it Friday :D I wanted to suggest some changes. If you have not already implemented them. The first is to recreate the power on and off monitor when you turn on and off the batteries. The second is the initialization of the monitor when the batteries are switched on. The third is the possibility to inhibit the train brake in changing cabs and parking (the inhibition is done via the white button near the central DMI monitor, the white button is pressed, it lights up and the brake is inhibited, the button is pressed again and it turns off and the brake is enabled) obviously when start this procedure , it is necessary to first brake with the train brake, "only train brake" and then inhibit it, so that the locomotive remains braked in the procedures. (See the BR193 Advanced of the RSSLO which performs this real procedure, active on the New Traxx and New Siemens loco). The fourth is the possibility of inserting the real procedure of changing cabins to drive from the opposite side and changing cab to use the rear locomotive to drive from the opposite side. I hope I was as clear as possible :) I do not know if you have already implemented all this but are tips to embellish the project even more :)ByDavid

[@christrains_real]

Hi. The 'gold master' is now done for the project so no more changes will be happening before the release. Maybe in a future update.

[@A320Virtual_Captain_Pilot]

Sounds good :)Thx

[@antonio.dauria]

actually prorail does not foresee TAF as the standard procedure. in genreal you start with OS and then FS

[@josh0203]

Hi Chris, i am amazed by your work but I have a question, is it possible for you to make some quick drive consists that start with a cold start? Thanks in advance

[@christrains_real]

It's a thought but the 'gold master' is now ready so no more changes are coming to the pack right now.

[@treinspotterzeger2890]

Hey Chris, kan je alsjeblieft de Railhopper maken? Of heb je die al gemaakt?

[@therealracer_1476]

Kan je in de volgende video laten zien hoe de stuurrijtuig werkt?

[@omarschocobleach8337]

Die rijdt niet joh

[@BlasterGames]

Die kan niet rijden omdat met de traxx kan je hem niet van afstand besturen. Daarom is de cabine van het stuurstand rijtuig ook niet functioneel meer