Chuck glider RC conversion - maiden flight [Part 2/3]

  Рет қаралды 6,302

Shogunemperor

Shogunemperor

Күн бұрын

Пікірлер: 40
@RCFlyer007
@RCFlyer007 3 жыл бұрын
I admire you for not giving up and the music was perfect during your maiden flight! You 😂 cracked me up👍
@shogunemperor
@shogunemperor 3 жыл бұрын
Hahahah thanks mah man! Much appreciated!!!! Yeah.. well I guess its kinda part of the hobby. U like, gotta make it work!! Hahahha
@unclealig
@unclealig 2 жыл бұрын
what was the issue why the plane did not fly properly on the first launches?
@shogunemperor
@shogunemperor 2 жыл бұрын
hahah it was a stupid error!! All my trims were reversed without me realising it!!! Geezz..... my stupidity!! urgh! I will remember this for life!! hahaha thanks for dropping by man!!
@theoztreecrasher2647
@theoztreecrasher2647 2 жыл бұрын
@@shogunemperor LOL. I was just thinking while watching the first half...."Why doesn't he just hold it by the bottom and launch it upside down if it keeps diving straight into the ground?" That should make it go up, no? 😜😂😂 Persistence pays off eventually, eh mate? 🙂 👍👍
@theoztreecrasher2647
@theoztreecrasher2647 2 жыл бұрын
We like making twin motor planes out of these and the larger LIDL-type gliders after our experience with the Eachine/AtomRC Flying Fish. No motor in front to get crunched, no torque roll and you can use smaller motors closer to the wing for easier COG considerations. Using tri-blades against the thinner wing gives better efficiency than against the bulky nose profile and the smaller prop disc means prop damage when landing is much less likely. Add a Byme-A stabilizer and they suit us Old Coots just fine! 🙂
@Mr_ZigZag
@Mr_ZigZag Жыл бұрын
Do u think this is worth building
@shogunemperor
@shogunemperor Жыл бұрын
Hey bruh! Really depends on you really. If ur not gonna be flying it much, then no. I just did it for fun as I've always wanted an RC plane and didnt wanna buy them off the shelf as they're crazy expensive.
@darylp.tumulak
@darylp.tumulak 3 жыл бұрын
i thing you forgot somthing you didnt get the cg or center gravity
@shogunemperor
@shogunemperor 3 жыл бұрын
hi, thanks for pointing that out. But u didnt watch the previous video. Battery was mounted at the CG point.
@irfunshah
@irfunshah 3 жыл бұрын
Bro, can share your 220g build? Etc motor weight or size
@shogunemperor
@shogunemperor 3 жыл бұрын
Thanks for dropping by bro! Im using a 5” quad motor. Ive changed it to the EMAX red bottoms 2300kv, the parts are in the video description of the previous video
@irfunshah
@irfunshah 3 жыл бұрын
@@shogunemperor noted bro. Thank you.
@JustInvertedFpv
@JustInvertedFpv 4 жыл бұрын
Nice one man! Had me laughing along with you lol!
@shogunemperor
@shogunemperor 4 жыл бұрын
glad it made you laugh bruddah!!! Laughter is all we need during this crazy period. Prayers to you and thanks so much for the love n support!
@JustInvertedFpv
@JustInvertedFpv 4 жыл бұрын
@@shogunemperor Best wishes for you and your family as well! I got a Mobula 6 today 25000kv version so I have a quarantine drone now. Ripped up the parking lot at home a bunch of times today!
@shogunemperor
@shogunemperor 4 жыл бұрын
@@JustInvertedFpv NIIIIIIICE!!! Its brilliant right??? DO make sure u back up the original settings. Mine's got this weird reset thing going on after each crash...
@JustInvertedFpv
@JustInvertedFpv 4 жыл бұрын
@@shogunemperor Yeah it's amazing! Unbelievable performance for a 1s quad. I had no idea it could be like that! I've heard if you let voltage drop below 3v the board erases/resets. I had one yesterday where I landed slightly below that and everything went black and thought it might have happened to me but I plugged in the next battery and it was fine. Fingers crossed!
@shogunemperor
@shogunemperor 4 жыл бұрын
JustInverted Below 3v ur VTX gets cut off. So watch that voltage.
@VictorFPV
@VictorFPV 4 жыл бұрын
Good job bro!
@shogunemperor
@shogunemperor 4 жыл бұрын
hahaha thanks mah bruddah! Much appreciated
@tahayt6142
@tahayt6142 4 жыл бұрын
Looks sick bro
@shogunemperor
@shogunemperor 4 жыл бұрын
thanks bro! Much appreciated!
@izzfpv5628
@izzfpv5628 4 жыл бұрын
Nice one bro.. Hahahahaa that first part
@shogunemperor
@shogunemperor 4 жыл бұрын
hehehehe thanks bro! Hope u liked it!
@blkmsk_fpv
@blkmsk_fpv 4 жыл бұрын
ahaha so funny! enjoy bro!
@shogunemperor
@shogunemperor 4 жыл бұрын
BlkmsK_FPV hahaha thanks mah bruddah!!! Kumustaka? Hope all of you are well!!
@banglaentertainmenthd2381
@banglaentertainmenthd2381 4 жыл бұрын
Nice
@shogunemperor
@shogunemperor 4 жыл бұрын
Bangla Entertainment HD thanks Baia!! Much appreciated!!
@maskystudio9193
@maskystudio9193 2 жыл бұрын
Spec motor ape . Esc Lipo Prop
@shogunemperor
@shogunemperor 2 жыл бұрын
BROOO.... check previous video!!!! The list is in the description below the video!!! hahahaa
@maskystudio9193
@maskystudio9193 2 жыл бұрын
@@shogunemperor sudah check bro takde
@shogunemperor
@shogunemperor 2 жыл бұрын
@@maskystudio9193 this video kzbin.info/www/bejne/gIa6iXtma5uraKc
@ВалерийЯкушин-ъ3й
@ВалерийЯкушин-ъ3й 3 жыл бұрын
It's hard to be clueless. Тяжело быть бестолковым.
@shogunemperor
@shogunemperor 3 жыл бұрын
hahah Спасибо, бро!!!! I think. LOL
Cheap Home project - Chuck glider RC conversion [Part 1/3]
12:35
Shogunemperor
Рет қаралды 49 М.
RC FOX GLIDER scale 1:3. construction planning and flight
6:44
חיים אדרעי
Рет қаралды 8 М.
Sigma Kid Mistake #funny #sigma
00:17
CRAZY GREAPA
Рет қаралды 30 МЛН
Convert a $3 Foam Glider to RC Flight!
15:50
Tim McKay
Рет қаралды 29 М.
EN Otto Lilienthal: "FIRST IN FLIGHT" - 7 Seconds for Eternity
26:56
Filmhaus Berlin
Рет қаралды 827 М.
I Built an Autonomous Drone at Home: Part 3 (Tilt-Rotor Wings) // EP09
10:22
R-X4R in an RC Chuck Glider
13:55
Andrew Newton
Рет қаралды 30 М.
Lidl glider RC conversion
4:42
saxxonian
Рет қаралды 52 М.
Kids Don't Fly RC Planes. Here's Why.
9:44
Tail Heavy Productions
Рет қаралды 218 М.
Chuck Glider RC Conversion - Part #1 - The Worlds Smallest UAV
26:32