Two way Switch Connection 6 Methods Connection Diagram

[@afzalaziz9703]

Very good and help full

[@nagnathkamble3925]

Nice👍

[@seenusamson7547]

Really good information

[@sohelsayed3589]

Real information, nice bro. 👌👌👌👌👌👌👌👌👌❤️❤️❤️❤️❤️❤️👍👍👍👍👍👍👍👍👍👍👍👍👍👍

[@CircuitInfo]

Thank you so much 😀

[@AwethentiquePtyLtd]

Method 1 and method 4 is exactly the same thing, only the switch is swapped around. Likewise with Method 2 Method 5 and Method 6 is exactly the same thing. Method 3 is something else

[@RenjithRs123]

😂

[@blessonjojijoseph9105]

Method 2 you're dead 😆

[@amitghosh6966]

Very nice. The third type looks like traffic light connection where red and green light glows alternately😊

[@Tselectricals]

Very helpful and presentation bhai ❤❤❤❤

[@CircuitInfo]

thanks

[@MusaKhan-jk5zx]

Good Sir ❤❤❤❤

[@valappadynoorvlogs6049]

சூப்பர் பிரதர் 🌹🌹🌹

[@mebrahtuhayleab]

Does exchanging the two nodes has effects while we're connecting the two switches....?

[@CircuitInfo]

there will be an ON/OFF switch position Change

[@joserupertochavezportilla4637]

Felicitaciones por el Diagrama.

[@rajeshnayak3131]

👏👏👏👏👏👏👏

[@ravichandrashetty7596]

Good sir but i would like to ask can we give neutral wire to switch ?

[@CircuitInfo]

Yes, of course, one of the connection.

[@aimbottg]

We can't use neutral for switch Thats more dangerous

[@kiranbhor5002]

Which method will save wire.

[@singaravelan6142]

Type 2

[@Arifhossainhalder509]

Type 2... But not safe

[@lnglng6961]

❤❤❤🎉

[@krishnakanthbandaru9308]

I have 3 phase connection in my home. Can we use R phase for 1 switch and Y phase for another switch?????

[@CircuitInfo]

Thank you for watching! No, it's not allowed-only the same phase is permitted (both switches should be on either the R phase or the Y phase). I mentioned this in the video, so please check it once again. It is generally not recommended for Type 2 connections. I demonstrated this option in the video to show that it exists, but it is not advisable.

[@ehabelbwab1783]

Thank you!

[@ParveenKumar-lf4my]

Good.thanx

[@cinemaarsenal6685]

Nice sir

[@muhammadyounas9029]

which type is better..?? Reply

[@singaravelan6142]

Type 2

[@ronakkhatkar855]

Wrong

[@Sonic_Rider2]

Type 4

[@aimbottg]

@@singaravelan6142 idiot We can't use neutral for switch When the switch fails to work there will be a very dangerous thing will happen

[@manivelusamy6145]

Methed second unsafety

[@j_arriero_bobinados_trifásicos]

In Spain this long commute is prohibited. In some modern mechanisms short circuits occur when activated. Regards.

[@aliashgar2789]

I think mathod two is not good because fase and nutral are one switch i think it is not safe and long lasting conection

[@gautammishal2115]

Why

[@AgainLoveStory]

Sem question

[@SPPushpaRaj]

Good

[@dineshchaulkar3119]

Very good 🎉

[@CircuitInfo]

Thanks for the visit

[@mazorr]

👍👍silent and most effective explaination.

[@supeskrim]

For AC type 1 = type 4 and type 2 = type 5 = type 6.

[@muwon8633]

Going by standards, its much appropriate to switch through the phase than having phase and neutral present in the same switch box, so 1 and 4 are better for me.

[@dilkhushgamer21]

I think method no 4 is best

[@FaizanAnsari-ps9ep]

Can it work on water pump

[@muhammadyounas9029]

Also helpful video..

[@BenedictMunya-fz4zx]

You're helping me thanks

[@adventure_999]

Hey mujhe koi aisa diagram btao ek taraf normal switch ho aur dusri side 2 way switch ho

[@Anilkumar-dt1ct]

bhai g type 2 me to phase phase mil kr bulb ko ura hi dega..ye galat wiring h....

[@akramulhaque6154]

and if we will try it for two way connection from two different places it will operate only one off and one on but the same time if we will off the both switch it on the bulb will remain glow so where is two way connection in all the 6 types of wiring

[@marimuthumarimuthu3574]

R u electrician? This is wrong.

[@kumkumdas8611]

Boom 💥🤯

[@essmehraj1147]

How it is wrong

[@PhuongTran-yd1lv]

Video 5 , tắt đèn pha nóng vẫn còn

[@multaja3906]

not wrong two of them i experienced practically

[@tapankumarsahoo22]

You need to know everything about Electricity and it's equipments😮😮😮​@@PhuongTran-yd1lv

[@rajeeshmk131]

No1 is using kerala

[@kaustavbhattacharya1540]

Type 2 suitable for water pump?? Genuine Reply

[@hailulenjiso8088]

Thank you for your clear presentation, what if you incorporate advantages and disadvantages if there is any of each method over the other?

[@shivaprakash.b]

Only two types wiring...

[@singaravelan6142]

Yes your are right, just connecting node changed top and bottom wise

[@augustblanco7831]

You're just making it looks like 6 diagram. But 1 & 4 are the same and 2,5,6 are also the same? sorry mate

[@ElectricianFuri]

😂😂😂😂 so dangerous N and L in one switch

[@gautammishal2115]

Why?

[@rohitbansal78]

If the button fails it will short-circuit

[@saurabhbhatia48]

Type 1 = Type 4 Circuit ✅ Type 6 = Type 5 = Type 2 Circuit ⚡️ Risky but it works. Type 3 ❌ it's not 2 way switch circuit 😂

[@vijaychandran7952]

It's only three types why are you tell it's 6 types

[@RajeshKumar-fn9jq]

Type 4 is best

[@AgainLoveStory]

2no method is working but mcb down same time

[@CircuitInfo]

Thank you for watching! No, it's not allowed-only the same phase is permitted (both switches should be on either the R phase or the Y phase). I mentioned this in the video, so please check it once again. It is generally not recommended for Type 2 connections. I demonstrated this option in the video to show that it exists, but it is not advisable."

[@ARUNKUMAR-vw9pu]

Types 3 method is waste any one light on the position

[@MahdiDahir-u1v]

connection wrong

[@LeelaRam-h7h]

Y

[@abdulmahusook4613]

Type 4 easy way like

[@kalisettyprakash]

First method is ok remaining method's not safe and you're repeating same this is foolish

[@aramachandran4039]

Wrong connection.one side of the bulb should be from phase.phase should be connected to the switch centre pole.

[@CircuitInfo]

Thank you for watching! No, it's not allowed-only the same phase is permitted (both switches should be on either the R phase or the Y phase). I mentioned this in the video, so please check it once again. It is generally not recommended for Type 2 connections. I demonstrated this option in the video to show that it exists, but it is not advisable."

[@buraqstudio0786]

Reported

[@MaiappanMK]

Only 3 method But you show 6 method You are .,.....

[@ZafarKhan-ip1um]

Type 3 is not a 2 way switch

[@sumoonline]

Type - 2 is risky

[@buraqstudio0786]

Type 2 will burn the electronic. Have you no shame ? You will hurt someone

[@akramulhaque6154]

no one connection is right its either two on or two off in all the 6 types

[@jayantaroy1543]

No 6 methods only 2 useful methods

[@dadabranding3537]

Starting the dots at the neutrals is very mis-informative. Pretty useless video.

[@anupkumar97230]

दो मैथड 5 बार बातला रहे हो।

[@markymckaland5045]

nalla

[@suryasimha000]

Only 2 types

[@aramachandran4039]

Don't give wrong ideas

[@santhoshkumar-io3pe]

Time waste

[@anupkumar97230]

काहे बुरबक बना रहा है बे

[@paransothyparamanandhan738]

wrong connection

[@CircuitInfo]

Thank you for watching! No, it's not allowed-only the same phase is permitted (both switches should be on either the R phase or the Y phase). I mentioned this in the video, so please check it once again. It is generally not recommended for Type 2 connections. I demonstrated this option in the video to show that it exists, but it is not advisable."

[@DharaniDhivya-iz6rk]

Very very wrong

[@CircuitInfo]

Thank you for watching! No, it's not allowed-only the same phase is permitted (both switches should be on either the R phase or the Y phase). I mentioned this in the video, so please check it once again. It is generally not recommended for Type 2 connections. I demonstrated this option in the video to show that it exists, but it is not advisable."

[@rahulmalutty1751]

Wast

[@sojosoman7851]

Remove this vedio