Circular Saw Rip Fence Guide : Unlimited length│woodworks

Hello, this is Dekay.
Today I made a fence for circular saws
Unlike the circular saw track I made before, the advantage is that it can be cut without any length limitation.
Please enjoy watching the video today
Always thank you very much for your support. =)
If you press the 'subscription' and 'thumbs' button, it will be a big help to me. Thank you. :)
Video equipment
= INDOORS
- Canon 70D
- Sigma A 18-35MM F1.8 DC HSM
= OUTDOORS
- Nikon D80
- Nikon AF-S DX 18-300MM F3.5-6.3G

[@suvallejo]

I absolutely love your videos and the beautiful simplicity of your work! Please keep it up and never stop showing more of your fantastic creations to us! They are very motivational! 👏🏻👏🏻👏🏻👏🏻🤜🏼👍🏼

[@dekayscrafts]

Thaaaaaaaank you 🤗

[@김영자-h6k2j]

우리나라에도 이런분이 계셨네요... 잘 봤습니다..좋은 영상 기대할게요..^^

[@dekayscrafts]

좋은말씀 감사합니다~~ ^^

[@ladykenja2700]

- It was a well done as are all of your woodworking projects. Excellence always has it's place. Thanx 4 sharing.

[@뚝딱쌍팔]

매번 보지만 가이드에 달인이십니다 ~ 한번만들면 유용히 쓰일텐데 한번만들기가..... 기찮네요 자주하시는 목수분들한테는 정말 꿀팁이십니다

[@dekayscrafts]

과찬이십니다~저도 초보라서 다른분들거 참고하면서 하고있어요 말씀 감사합니다~ ^^

[@이현준-m1n]

대단합니다~~ 앞으로도 좋은영상 많이 부탁드립니다~~👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻

[@dekayscrafts]

고맙습니다 ~~

[@SebastiaanMollema]

Fancy! Very handy and simply put together without permanently attaching the saw!

[@dekayscrafts]

Thank you 👍

[@chomp54321]

Bloody brilliant! I think the only thing that I may change is to make the side where the measuring tape is narrower to reduce the mass that's hanging off the work piece. Well done!

[@dekayscrafts]

Thank you 🤘🤘

[@KenPem]

Great build! Nice and simple, easy enough that I can make one myself. Thank you.

[@dekayscrafts]

Thank you too :)

[@upiupi2429]

always watching your video update, good build friend 😃👍

[@dekayscrafts]

Thanks freind =)

[@christofix]

Great idea! I looks good and the jig is a lot smaller than the one I use. I should make one like this too!

[@dekayscrafts]

Thanks Friend!!! :)

[@horaciocastillo3082]

ANOTHER FANTASTIC IDEA..THANKS FOR SHARING

[@dekayscrafts]

Thank you :)

[@andreanobili2040]

Very good idea 💡 I’ll do the same ASAP 👏👏👏👏👍

[@dekayscrafts]

Thank you :)

[@kenspix]

Ingeniously simple, I love it. Thanks for sharing.

[@donslee7563]

와!!대단하네요~~ 본대로 한번 따라해보겠습니다~^^

[@허생원生草]

잘봤습니다 초보 위해서 자재나 공구도 알려주세요

[@reneaguayo6505]

Saludos desde Chile, muy buenos tus vídeos, un gran aporte al mundo de la carpintería. Felicitaciones.

[@koreanwoodworker2582]

간단하게 많이 업그레이드 되네요~! 좋은 영상 잘봤습니다!

[@dekayscrafts]

감사합니다^^

[@taehyunkwon7261]

와~~~잘만드시네요~~~

[@muhammadfuad5449]

Great idea and thanks for the video. I was looking for something like this.

[@ketanparikh2106]

You do make some fantastic jigs but my only complain is you never show dimensions. However I did like the subs in English it was easy to follow along

[@dekayscrafts]

From now on, I will show you the dimensions. Sorry.

[@eliascastillo3494]

Buen trabajo me puedes decir como se llama el pegamento que usas para unir mader

[@한소영-c9p]

잘 봤어요~~

[@코코코코-q2k]

감사합니다

[@dekayscrafts]

감사합니다^^

[@SanderOpdam]

Definitely something I’ll make too. Thanks for the video.

[@dekayscrafts]

Thank you 👍👍

[@정성엽-e4c]

45 도각으로도 가능한지요? 정말 예술이시네요 부럽습니다,취미로 하고싶어서 장비만 사다놓고 맨날 눈팅만 합니다

[@leopham163]

Nice idea. But only work when you already have a straight edge

[@ccaaproduction105]

Thanks

[@dekayscrafts]

Thanks =)

[@FELIPE-lf7df]

La mejor idea para lo q necesito hacer.muy ingenioso maestro..

[@dekayscrafts]

Gracias👍

[@denisholodov5315]

Полезная штука, давно искал как заделать и вот нашел. Спасибо за видео.

[@dekayscrafts]

Я рад, что это помогло Спасибо

[@한소영-c9p]

Good job👍👍👍

[@jarosawderybowski3506]

Awesome!! Thanks for sharring.!!!

[@숲속고양이-n5d]

와우!! 대단하세요!!!

[@dekayscrafts]

감사합니다 ^^

[@ThomasScience]

우와~ 조기대네요 이번엔ㅎㅎ진짜 소리만 들어도 힐링되는 먼가 ASMR같기도하고~ 보는내내 시간가는줄모르고봤습니다.ㅎㅎ

[@dekayscrafts]

좋은 말씀 감사합니다~~ ^^

[@sapelesteve]

Just brillant Dekay! Had to bookmark this for later viewing as I intend on making one of these....Thanks

[@dekayscrafts]

Thank you 🤗🤗🤗

[@geraldoexpeditodosreis8932]

Belo trabalho

[@minkyupark8111]

인테리어쪽 일 하시나요? 잘보고갑니다

[@김남자-w2f]

어떻게 저런 생각을 할수 있을까

[@alejandroleejh]

와 대단하네요

[@dekayscrafts]

고맙습니다~

[@ΚωσταςΣχοιναρακης]

So simple but so Genius! Thank you, i enioed that more tha a movie!

[@dekayscrafts]

Thank you :)

[@Rick_Sanchez_C137_]

Good video, but if I need a table saw and jig to make a fence for the circular saw there is a huge issue (mainly that the circular saw fence is not needed if I have a table saw, especially if I have jigs for it)…. Also, I see you make a lot of jigs with 1/2” or thicker lumber, wouldn’t it be better (such as for this jig) to use 1/4 inch ply and then reinforce the jig by gluing a couple 1/4 inch ply strips on the outside upper edges running the length of the jig where the slide goes back and forth? This would reduce the standoff of the saw from the board to be cut and provide for greater cutting depth while still making the jig sturdy enough that you don’t have to make a new one every six months. IMHO

[@eloadasokbzsa8753]

Dekay, why not bring that triangle closer to the blade, so you could rip thinner boards than apr 10 cm according to your jig? The jig is very good and simple. I would however make possible thinner rips too. Congrats!

[@cuih]

Very inspiring 👍

[@dekayscrafts]

Thanks👍

[@turtleclans1]

checked out your vids. Awesome.... subscribed

[@dekayscrafts]

Thank you so much 👍

[@gomesdasilva5844]

Quando uma ferramenta tem qualidade ela é chamada de boa Agora quando um ser humano é a sima da da média ela é chamado de gênio Mais eu prefiro lhe chamar de mestre

[@dekayscrafts]

Muito obrigado =)

[@나르탐지기]

플런지쏘 사는게 마음 편할듯 ㅎ ㅎ

[@luisrubenmedina5340]

Excelente

[@dekayscrafts]

Thank you

[@설마유-k6t]

👍..구매 하고싶어요!! ^^

[@dekayscrafts]

목공 시작한지 얼마 안된 초보라 판매할 정도는 아니예요~ 말씀 감사합니다^^

[@davidmuresan1735]

See my Parallel Guided Power Saw.

[@sayedsaqr4593]

رائع 👏✊👍

[@dekayscrafts]

Thanks =)

[@ronaldorodriguesdacosta443]

stayed top, needed the measurements of the wooden pieces

[@garcia678]

GRACIAS POR EL VÍDEO Y APORTE, EXCELENTE IDEA.....

[@dekayscrafts]

Thank you :)

[@ubiratanoliveira692]

parabéns pelo projeto, vai ajudar a muitos.

[@dekayscrafts]

Obrigado!

[@d3strac00l]

Inspiring, I'll make one...

[@dekayscrafts]

Thank you🤗👍

[@DIYFixMan]

nice ❤️

[@dekayscrafts]

Thank you ❤

[@R7045-k9c]

Brilliant, what model this Dewalt saw

[@dekayscrafts]

Dcs-391 Thanks:)

[@남이강석-j1q]

고민해결 엄지척

[@dekayscrafts]

감사합니다. ^^

[@gl4267]

Excelente !!!

[@dekayscrafts]

Thanks =)

[@리니온]

파시는거면 구매하고 싶네요

[@dekayscrafts]

영상을 편집해서 그런데 판매할 정도는 아니에요^^ 말씀 감사합니다~

[@mattlamp8331]

nice build! what thickness mdf did you use? and for the triangle did you use thicker plywood? thanks

[@dekayscrafts]

mdf : 9mm / guide : 18mm Thanks =)

[@МихаилГрецкий-ч8ю]

Инструмент прост и удобен , спасибо за ваш труд, едиственно вопрос возник, не зажимает заготовку на выходе в конце пиления? но думаю сперва соберу возможно просто сам не продумал процесс пиления. Еще раз спасибо !

[@ENERGYELEC-nw9sb]

졸라 머싯어

[@dekayscrafts]

ㅋㅋㅋ 고맙습니다~~

[@OD_88]

이렇게하면 합판 원판 재단도 문제없이할수잇나여?

[@dekayscrafts]

네 가능합니다. 제가 그렇게 사용 했어요 ~

[@코코코코-q2k]

공구 모델명이 먼가요

[@dekayscrafts]

디월트 무선 원형톱 dcs-391 입니다~

[@코코코코-q2k]

@@dekayscrafts 감사합니다

[@trooperjoe73]

Very nice. Copying this.

[@dekayscrafts]

Thank you =)

[@luisambros3987]

👌👍👏👏👏

[@dekayscrafts]

👍👍👍👍👍

[@청년아빠-b1m]

혹시 원톱모델명좀 알수 있나요..구입할려고 합니다

[@dekayscrafts]

dcs 391입니다~

[@chsh851016]

하나.파세요

[@dekayscrafts]

하나밖에 없어용

[@oscamnalbur]

Brilliant thanks

[@dekayscrafts]

Thank you 👍👍

[@waynepan1750]

Genius!

[@리꼬끄-w7t]

유용한 영상입니다 .감사합니다

[@dekayscrafts]

제가 더 감사합니다~~

[@gentle5333]

Nice job

[@СтаниславБровко-ч1м]

Как всегда и все Ваши приспособления очень практичны и простые в изготовлении. Спасибо и удачи.

[@adrianperalta7192]

Gracias! a tu video excelente

[@dekayscrafts]

Gracias tambien!

[@Cat-dl2bl]

👍👍👍

[@dekayscrafts]

👍👍👍👍

[@khaliderregragui6695]

Hi thank you again. Khalid Orlando USA Florida

[@dekayscrafts]

Thank you so much 😀😁😃😄😆

[@nireekshanvkumar8660]

Watching all your videos. You got a very creative mind👍😊

[@dekayscrafts]

thank you =)

[@esWoodworker]

Nice Build Thx , can make it cut more than 40 cm? (if use more taller slide)

[@dekayscrafts]

I will later =)

[@vivaldorodrigues7298]

Muito bom

[@gusntroll]

Great jig, good design, simple and sturdy

[@dekayscrafts]

Thank you too :-))

[@앵두-t7z]

항상 잘 보고 있습니다~ 나무는 mdf인가요? 몇t인지도 궁금합니다^^

[@dekayscrafts]

영상에서 사용한 목재는 mdf입니다만 일반 합판 15T정도 사용하시길 추천드립니다 ^^

[@jorgerosa3398]

Genius.

[@dekayscrafts]

Thank you 😄