Ciro LED Bag Blades Brake & Turn Signal Install/Review

[@eddiereyes4707]

Great video, I followed your directions step by step, and successfully completed it without any issues. Looks great, thank you so much.

[@sikbaggers]

Thanks for checking it out and im glad it helped you!

[@robertsebena1488]

Just found you and like to say thanks for all the info and taking your time to explain everything to all of us.

[@sikbaggers]

Thank you for stopping by Robert! Much appreciated sir.

[@dejuanwilliams9197]

You rock Dude. The other guys doing this did not show under the seat. Rock on.

[@sikbaggers]

awesome man..im glad it helped!

[@snakebite6511]

I am new to the Harley work and since purchasing my 2021 Street Glide I have stumbled across this channel and your advanblack channel. I have self installed a few Ciro pieces and you have certainly saved me money on dealership service fees, all of your vids have been awesome and i have subscribed to both channels. This Ciro saddlebag lights will be my next purchase and now that we are getting closer to the end of the season here in Canada i will be ordering lowers for my 2021 Street Glide along with a Trunk and some liners for trunk and saddlebag. Curious about the chin guard, love to see that but can't seem to find a video for that, would like to see how it looks. Love the channels man, will be placing an oder very soon.

[@jdkmboy]

Glad to see you finally jumped on the bag light train.. welcome aboard! Another great vid. Thanks bro.

[@sikbaggers]

Thanks brother..Yeah man...wish you would have told me about these before ..LOL

[@JesusTorres-bd7mp]

Thanks for another great video, I purchased the same set up and now my red light and check engine light are on.😢

[@sikbaggers]

if you have an engine light on, that means you have a code. Check your ETC codes, then go to this website and see what it is www.wilkinsharley.com/--Checking-Trouble-Codes-2019-Harley-Davidsons then clear your codes and turn the bike off and back on. See if the code comes back on. More than likely its an open circuit and it just needs reset. no biggie. Things like this will happen if you ever turn on the bike while you are installing or unplugging lights and plugging them back in. There are videos youtube that show you how to check your codes. Its easy. I hope this helps.

[@joellongoria2239]

Great video!! Question...aren't the rear lights supposed to be red...when the turn signal is on they are yellow ??? 🤔

[@sikbaggers]

thank you ...but no not in the US...you can run red on red or red on ember...ciro offers both versions

[@stevebauer459]

This is the best MC DIY video I've ever seen! Awesome tutorial!!

[@sikbaggers]

Thank you Steve! ...Much appreciated man

[@cd4917]

Great video, thank you so much. I just ordered these today. I appreciate you!

[@djmyk702]

Sorry this is off topic but where can I find the 8in speaker grills you have on there? I bought the advanblack lids and installed Hertz 8's. Hard to find grills for them that will fit. Thanks in advance! Love your videos!

[@sikbaggers]

I tried 6 different grills from amazon and none fit..these do! But you have to buy 4..but hell for less than 20 bucks IUm good with it,..,.drop right in! smile.amazon.com/dp/B0725HYSSG/?coliid=IUDGX5TRA6WIN&colid=3Q7DIUCNMOLV&psc=1&ref_=lv_ov_lig_dp_it

[@djmyk702]

@@sikbaggers thanks for the advice.. I will have to try them out. How do they mount? Doesn't seem like there is any way to screw them down.

[@babybugspaw7085]

As usual Steve, very good explanations. Thank you!

[@sikbaggers]

Thank you! Glad the video helped!

[@dbrown2989]

Very nice demonstration!

[@sikbaggers]

thank you for checking it out

[@darionbrown7414]

Question I have a 2014 Harley Street Glide I put the saddle bag lights on I have static in my radio sos

[@jaaj699]

Great video, but you didn’t show turn signal with brake light activated.the sequential turns off when brake light is on

[@sikbaggers]

yep, every single brand that makes these lights on the market do that.

[@rpiii3755]

Is there enough room for the 12 or 14 plasma rods?

[@keith64093]

Hi Steve, you are doing great work. I have noticed on my 17 RG that under the seat and under the faring there are some pretty major plugs that are not being used. also there are empty switchs that are plugged in but don't do anything. can you do a video on what these are all for? there seems to be a lot of potential for custom applications. regards Turtle

[@sikbaggers]

Hey great idea...and yes I can do one on that...when I get back from Daytona I will squeeze that in! Thanks Keith!

[@puarideum6178]

When you use the blinker and press the brake at the same time does the brake lite go out?

[@randyoverton7951]

I want the bag blades but can't decide on Ciro3D or Custom Dynamics. I've heard that if I get the magic strobes the Ciro3D won't flash but the Custom Dynamics do. Just curious your thoughts on the bag blades or what you recommend?

[@sikbaggers]

You can get the bag blades that are not sequential so they will flash with the box. I would give them a call to see which ones they are. The sequential signals go from inside out so when the box is flashing its only flashing the first set of leds in the sequence instead of the whole blade. I just bypassed my blades to not flash. I really like the sequential turn signals better than the flash. My bullets and tri bar light still flash.

[@71cfree]

@@sikbaggers how did you bypass the blades not to flash?

[@nickwoodruff7124]

nice bike where did you get the led strips for the fender filler

[@sikbaggers]

They are Plasma Rods from custom dynamics

[@chrisherrera303]

Thanks for this video Steve. I've been debating between ciro bag blades or the custom dynamics low profile bag blades ..and I think I'm going to get the Ciro bag blades , already have the filler lights , and the fang light head light trim

[@sikbaggers]

Hey Chris sorry for the late reply but yeah man I dig these..they are super slim and bright!

[@chrisherrera303]

@@sikbaggers just got mine in couple days ago , can't wait to put them on .

[@nstavely1]

Can you give me a quick run down for how to run the plasma rods AND the bag blades?

[@sikbaggers]

bagger blades are plug and play...plasma rods are wired into the harness...

[@willwalker5594]

Are these brighter than the HD bag blades?

[@sikbaggers]

Equally as bright I would say but a lot better looking...sleeker design than that big bulky bag light they sell

[@snomobila]

Love your channel, glad you came out with another video! You're one of the very few pros who mention activating the 3m adhesive, so good job on that!! P.S. I asked Santa Claus for a set of Advan black bag liners for my 2019 street glide!

[@sikbaggers]

Thank you much appreciated. Yeah these bag liners are nice..no more crap rattling around in the bags

[@weephen2506]

I put these on my 18 rug and now the check engine light keeps popping up. Any ideas?

[@sikbaggers]

acheck engine light indicates you have a code. Check your dtc's. More than likely it is a low voltage code. If your bike is all OEM bulbs and you added LEDs this can cause the issue. You will need to change all of your bulbs to LED. I know it can be pricey to do so but LEDs are much brighter and will last forever. This is on a 14 but my video here explains hot to check the codes..same on your 18 kzbin.info/www/bejne/kIebqYKEr76mirc

[@juneskiandladyt332]

Great show keep up the good work!

[@kevinlindstrom4078]

Nice work man, greatly appreciate your video's

[@sikbaggers]

Thank you Kevin...much appreciated man!

[@jimmyflowers6597]

you can still use those with the magic strobe and have them flash they work fine I've got it installed on my bike and they look good and they flashed just fine

[@sikbaggers]

you have the sequential turn signals? I put them ont he other side and when I apply the brake and hit the turn signal at the same time, while the bike is flashing the turn signals wig out until the flashing is done..mines on a 5 second flash then full red. Im saying that while its in the 5 second flash mode and i hit the turn signal it wigs a little.

[@jimmyflowers6597]

@@sikbaggers yeah that one might be a little different than mine I have the solid red mine don't have the one that goes Amber so maybe that's the difference

[@sikbaggers]

Yes sir...that's what I was explaining in the video..if u get just the red lights u can use the magic box...but with the sequential it makes them go goofy for a few seconds.

[@jimmyflowers6597]

@@sikbaggers alright thanks for the info good video keep the good work up

[@michaelowsley9258]

as always great videos

[@seanwenchell1034]

Hey man , I really appreciate your very thorough and detailed videos. I just got a new 2020 street glide special and can't wait to customize it with some cool CIRO LED lighting. I noticed your watch ⌚ , who is it made bye???

[@sstanforddpt]

Looks like a really loose fitting Invicta chrono to me.

[@SuperThunder911]

Cool brother,thanks ✌️

[@dustinlowe434]

How come you took off the cvo rear fender?!

[@sikbaggers]

Just not my style ....I didnt care for the gap around the exhaust plus I went no cut out bags and custom turn down exhaust. The cvo fender doesnt come in no cut out ..just dual exhaust.

[@dustinlowe434]

@Steven Housden i agree, i switched mine to the cvo style rear fender and feel the gap is huge around the exhaust and i have cfr’s

[@joshuarankin7518]

Can you explain your exhaust setup. I've been trying to find a way to hide my exhaust from the rear, but not have it on the side pissing off the old lady. Thanks.

[@jimmyflowers6597]

What size plasma rods are those?

[@sikbaggers]

these are the 8's

[@jimmyflowers6597]

@@sikbaggers thank you much

[@trenttaylor6823]

Ok so I searched ciro. There bag fillers look different then what’s on that black bike. So all I want is the fillers. Nothing else. The ones they show on there site is dual led on each Side. I don’t. Want that. I want exactly what you show. I don’t want the lid lights or license plate lights. Trying to keep it simple

[@sikbaggers]

The fillers that are on this bike during this video are from custom dynamics..they are plasma rods. www.customdynamics.com/dual-color-run-brake-turn-plasma-rods

[@joehiker5573]

3:28 Take your watch to a jeweler and have it fitted to your wrist... its too loose! takes about 15 minutes

[@sikbaggers]

all this info and this is what you concentrate on...how I wear my watch? lol ok Joe..thanks man

[@RuudHarman]

I can´t say about every Harley but the ones that I know all come from the factory with the possibility to leave the turning or hazard lights on with ignition off as well in accessory mode. Very important and safe when you have to leave your bike in case of emergency to warn other traffic and of course you don´t want to leave the ignition on. To my surprise I noticed that the controller that comes with the Ciro lights does not support the turning or hazard function with ignition off or in acc. mode. I think this is an error in the controller. When discussing this with Ciro, they trivialise the problem and at first did not understand why this matters. Even my suggestion to change this in future controllers to make the rear lighting a lot safer is not changing Ciro´s position in this. ´´It isn´t an issue´´ they say.