CIRO3D Horizon LED Windshield Trim Harley Davidson Batwing Fairing Install

[@Bumanator322]

Great install and thank you for your service to our country.

[@sikbaggers]

Thank you!! Much appreciated and thank you for checking out the video!

[@pauljohnson7486]

Watched your live stream with your beautiful wife. You are a good dude and I appreciate you allowing us to know you and your family. I will stay a supporter from one veteran to another.

[@sikbaggers]

Thank you sir..much appreciated. We had a great time and hope to do it again real soon. Thank you for your service as well!!

[@bigalthecrusher]

Thanks for the video, just installed mine. Fairly easy, if I can do it, anyone can do it. Hardest part was removing the plastic from the trim piece LOL, then at the very end trying to line up the trim piece with the 3 holes for the windscreen, had a tough time, one tip I can share is put in the 4 fairing bolts loose, that way you can shift the batwing ever so slightly to get it where all 3 holes are lined up under the windscreen. Hope that helps someone down the road.

[@sikbaggers]

great tip!! And thank you for sharing! Glad you got your all lined out.

[@michaelterry885]

Nice install very clean look thank you for your service brother Can’t wait to watch the live stream you guys did just real busy trying to keep our grocery stores stocked god bless us all

[@sikbaggers]

I understand and thank you for everything you are doing as well! Thanks for checking out the video man! Much appreciated.

[@snakebite6511]

Just received this yesterday and will try install today, because of your vids everything i have purchased from Ciro3D has been really easy to install. Great vid again.

[@sikbaggers]

Great to hear! Thanks for checking out the vids...much appreciated!

[@jessepauly4240]

As always your videos are so well done and informational thanks for what you did Veteran and what you do. I'm sure it helps many.

[@sikbaggers]

Thank you man! I appreciate that! and thank you for checking out the vids.

[@moldmaker1]

Thanks Steve, just ordered mine!

[@sikbaggers]

Youre welcome Tim...youll love them!

[@jeffmartin6200]

Thanks for another great video I just clicked through and purchased it.

[@sikbaggers]

Thank you Jeff...they are way brighter than I thought they would be and love the turn signal function...pretty cool

[@ryanm8456]

Another great video. I’m going to consider this for my bike.

[@sikbaggers]

Good choice! Adds some much needed light to the front for sure!

[@OZARKSHDRIDERS]

Nice install brother and I dig the function of the lights,job well done brother 💯✌️😎

[@sikbaggers]

Thank you man..yeah those sequentials are pretty sweet!

[@OZARKSHDRIDERS]

@@sikbaggers really nice 👍💯

[@justindale9306]

Good looking install video brother! Ciro3d make some good products. Stay safe man and please keep the videos coming.

[@sikbaggers]

Yes sir..Agreed! Thanks for checking out the vids...be safe man!

[@kevinthompson3776]

Thanks for the vid Steve! Really enjoyed your live show the other night. Good to see you have the support of your family. I don’t do FB but I would like to know when the next live show will be as well as getting my hands on some SIK swag. You mentioned posting your email during the show. Thanks again!

[@sikbaggers]

Hey Kevin...I will post the next show on here as well on the community tab on the home page...my email [e-mail] ..hit me up over there bro im doing an order right now and probably submit it on friday...thanks again for the support!

[@kevinthompson3776]

Thanks Steve!

[@TAT2D-SQRL]

Damn it Steve now it is a tuff choice from the fang bezel or the windshield trim lights LOL

[@sikbaggers]

lol...yeah man they are both nice! Thanks for checking it out bro!

[@dong4702]

Good clear instruction. I'm putting in a Klockwerks windshield and have a custom trim on it also. Just wanted to see if there was anything I needed to concern myself with. You explained it fully and clearly. I also subscribed to the channel so looking for more tips from you. Thanks.

[@sikbaggers]

Thanks for checking it out Don...sorry I missed this comment the other day...and thank you for the sub! Much appreciated sir,

[@benpadilla157]

Great video brother always informative at least I know I am not the only dum ass that drops stuff made me feel good an not alone take care brother I am planning a road trip out to Illinois some time in June to see my buddy in marion will have try to come meet you somewhere later brother God bless

[@sikbaggers]

Well that should be easy to meet man..were in marion! Just outside marion anyway..about 5 miles towards the lake of Egypt...just let me know and we will be there!

[@Streetglidescotty70]

Do you have an install video for those passing lamps on the street glide?

[@sikbaggers]

The passing lamps are part of the turn signal assembly. Just take off your turn signals like I did in the video and replace them with these. Plug and play.

[@Streetglidescotty70]

@@sikbaggers Oh perfect thank you

[@benpadilla157]

Yup I forgot thank you for your service my brother

[@sikbaggers]

Thank you sir!

[@gucci4871]

Cool

[@sikbaggers]

Thank you for checking it out

[@gucci4871]

@@sikbaggers thanks for content we all enjoy it.

[@grahamjohnson3154]

I love Ciro3D accessories and the instructions they send are easy to follow, none the less I love to watch you install videos and find them very helpfull and insightful. The passing light turn signal assembly on the SG in this video, is that an HD or after market brand item, since HD charge so much for theirs, any suggestions for a good alternate.

[@sikbaggers]

Hey thank you for checking out the videos we really appreciate it! The lights in this bike were purchased from Advanblack. Here is the link but I think they will sell just the passing lamps, you may give them cal..they have been on this bike for 4 years now and no issues... www.advanblack.com/harley-parts/harley-lightings-sounds/headlights-parts/advan-black-chrome-7-led-daymaker-projector-style-headlight-auxiliary-passing-lamps-fit-harley.html

[@fishaman1968shadow]

Great video as always buddy. It's a shame it costs so much to send to the UK. Keep safe buddy.

[@sikbaggers]

thank you sir...yeah the shipping can be crazy..even more so now..it seems the delivery people have jacked their rates over this virus crap

[@pengyG10]

if you have the fork LED do I need an additional splitter ?

[@cd4917]

No, they daisy chain right into your turn signal plug. Very easy install.

[@Blackangus-nm4mr]

What kind of drill is that being used? I took off my rear reflector today and could’ve used that?

[@sikbaggers]

The Milwaukee m12 www.homedepot.com/p/Milwaukee-M12-12-Volt-Lithium-Ion-Cordless-3-8-in-Ratchet-Kit-with-One-1-5-Ah-Battery-Charger-and-Tool-Bag-2457-21/202957709

[@justanotherviewer52]

Thanks Steve. Unfortunately, another great product that doesn't fit the 2013 FLTRU.

[@sikbaggers]

Yeah I saw that when i was searching the product and was surprised there wasnt a 13 down model. Maybe they are working on it.

[@justanotherviewer52]

@@sikbaggers I sure hope so. I have noticed there are a number of items they have discontinued as well. IE: The Spark Plug Hut, but I was able to find one on Amazon. Installed it yesterday, after some new plugs. Looks great. Next - Bag Blades.

[@JokerTheVlad]

Time to buy a new bike!

[@stuartmacarthur1000]

Do you ever do work or adds on older bikes 2005 & up?

[@sikbaggers]

Its very rare that we get older bikes in..some 09 to 13 but mostly 14 up

[@onpointdetailingbrandon6119]

WHERE DID U GET THAT TAKE BAGE AT ? ON THE BIKE ON THE LIFT BACKGROUND

[@sikbaggers]

Detroit Choppers ...call Mike Suggit over there

[@Randystites66207]

I need to see if Ciro has them for the 07 Street Glide. Love the look and its all about being seen. Thanks for the video.

[@sikbaggers]

I think for now they only have them for the 14 up

[@luismata6099]

What speaker system is that in your fairing? Looks like the speakers have their own box thing,?

[@sikbaggers]

yes they do on the 2014 up models ..they are stock like that from harley..they are just pods.

[@SMAN132]

Would that be the same as 2015 ultra limited?

[@sikbaggers]

yes it will be the same

[@oddbjrnblomsnes547]

Washers?

[@sikbaggers]

Youre going to have to be a litte more specific if you want an answer from "washers"?

[@oddbjrnblomsnes547]

@@sikbaggers Sorry for that. But in the beginning of the video where you showed the parts included, you mentioned som included plastic washers. You said that you would address them later in the video but you never did. I do know where they go now, but still. By now means intended to criticize your videos causeI do like the way you do them. Keep up the good work, greetings from Norway.

[@TobyNorthEN]

First comment!!!! :)

[@sikbaggers]

haha!! Thanks man!

[@TobyNorthEN]

@@sikbaggers what's a good way to reach you (PM, email, DM)?

[@MotorHead963]

cool video, lights look bad as

[@sikbaggers]

Thanks man...yeah they are way brighter than I thought they would be for sure.,