Cisco ASA-5506 MGMT Interface Configuration to access (ASDM)

In this video, I will walk you through how to configure the management interface on a ASA 5506 so you can access the ASDM.
******************
NOTES & Configs
******************
MGMT Config
****************
interface management 1/1
ip address 192.168.10.10 255.255.255.0
security-level 100
nameif MGMT
***************************
Config Allow Https for(ASDM)
***************************
http server enable
http 192.168.10.1 255.255.255.255 MGMT
#This will be the ip address of the PC#
Verify if you can ping the MGMT ip address
Open an web browser go to 192.168.10.10 or the ip you set on the MGMT
You will be prompt for login we set admin/admin
If you don't have the ASDM installed you will be asked to install.
You may have to install (java run time) as well.
#Set the Target Location on (ASDM App) if it's not set correctly#
Target # C:\Program Files (x86)\Cisco Systems\ASDM\asdm-launcher.jar # or where ever you have yours installed on your PC#
#Look under C:Program Files (x86)#
#On ASDM App#
Right click the ASDM App click Properties and change the Target to point to # C:\Program Files (x86)\Cisco Systems\ASDM\asdm-launcher.jar # click Apply and launch the ASDM

[@Kron0s6]

thank you for this, really helpful as a student

[@penah4855]

Thank you bro , its helpful 😊

[@trangtrang5841]

Good job Coles, keep making more vid please . Can you do a Vid about the remote desk top from Dallas to Houston using VPN ?

[@moondoggspicoli1583]

Great video! How do you get your console colors like that?

[@jarodgramata9245]

May I know how the cabling was set up here?

[@wizardz7938]

dum question i just got my cisco firewall 5506 and when i plug the console cable its on com3 but when i use mobaxterm and access serial com3 nothing shows ....what am i missing thats how i connect with my router and cisco servers thanks. I have the 5506 connected from the console port to usb

[@coles-tech911]

1.Check device manager to verify the correct com port( make sure it’s not showing need driver). 2.Make sure your bud rate is correct as well. 3 Try putty as well. Hope that helps

[@wizardz7938]

@@coles-tech911 i think its damaged amber light of death im getting

[@eurixfranx]

I am receiving this error below, which version of packet tracer supports HTTP % this version of Cisco Packet Tracer does not support this option

[@coles-tech911]

Sorry this was done on real equipment.