Citroen C4 starting issue with p1169 fault code

[@ako568]

Thank you very much for your help I saw you and I fixed my C4 thanks again

[@sanmechanic9040]

La xzmat dam bram 👍

[@ako568]

Zor swpas barezet

[@DannyV94]

Could you please explain how you connected the wire into the fuse?

[@hadial4260]

Hi mate I got Citroen C4 grand Picasso 2011 at 1st gearbox lock up soledond and car not moving then now not starting at all no cranking at all . what do u think plz ?

[@wifetien2673]

Hi, do you connect wire from battery to the fuse connector or do you have to have fuse connected at same time? So put a wire in there then jam fuse in there with the wire? Then use fault reader to clear fault codes? Thanks

[@sanmechanic9040]

It doesn't matter how you connect the wire to the fuse just you need connect the wire from the battery to the fuse on the same time delete the code then you should able to start the vehicle

[@joelifbarbe292]

halo i have a citroen xsara1.4petrol years2004 it has no ignition on dashboard all fuse and eart h wire okay engine crank no start can any body advice

[@sanmechanic9040]

First try to disconnect the battery leave it for few minutes see how it goes

[@DannyV94]

What kind of wire do you need to connect to it? Also do you just twist the end of the wire and put it in the fuse?

[@sanmechanic9040]

you can use any wire. Just do what I do on the video

[@sanmechanic9040]

Please follow my channel for more videos thank you

[@frydrychm]

@@sanmechanic9040 Hello, have you connected it when battery was also connected to the car or i should have disconnect main + and only connect it with this 8 fuse?

[@yousefbhoyroo6960]

Did the car start

[@sanmechanic9040]

Yes

[@user-bj3km4hg2s]

I have the same car crunk but not start maybe this the problem if you can help my I call you what's app thanks

[@user-bj3km4hg2s]

My car is in economy mode help me thnks

[@sanmechanic9040]

Hi for this job you need diagnostic machine to delete the fault code then you will be able to start the car

[@user-bj3km4hg2s]

@@sanmechanic9040 i am a diagnostic man , I trying to delete but is tell in the bsi problem , the car is replaced to new engine , I try to change the fuse box bsm to new the same problem

[@sanmechanic9040]

You have to connect positive power with number 8 fuse then delete the code then you'll be able to start the car

[@archiebold1395]

Hi ! what does the no 8 fuse power? Thank you

[@arthunterns]

I hate that BSM unit