amazing build love seeing these motors make power, instead of the usual b16,18s or C18's D16z's are lit!!!! Keep it up sire
@ezragreene33847 жыл бұрын
there was a second there were i thought to myself "i bet this whole video is just gonna be a troll vid of him priming the car"
@ganjaspeeder11445 жыл бұрын
that sounds VIOLENT
@LorenaFagundes-ki3ee Жыл бұрын
goodnight friend!!! Congratulations for the project, I'm from Brazil and I'm starting a project with itb but I have some questions can you help me? my doubt is about what itb to use my mechanics is d16z6 with p29 piston walking with 13.1 rate.. which itb would be good. cbr 1000rr or srad 750cc? and about the accelerator I use the msm cable or not? I use the moto nozzles or I can use the 60lbs bosh ones?
@codewaterairsoftandmore10504 жыл бұрын
I like your nail polish man, just painted mine pink too
@SCKAPEE4 жыл бұрын
yea man, no problemo ;)
@JZKDutchYT2 жыл бұрын
Don't kick it so hard with a cold engine. Let it warm up first.
@glennrosheuvel8688 Жыл бұрын
Its a honda, it will handle it
@findtherightbeat6 жыл бұрын
Nice car, may I ask what the blue cylinder is in the engine bay? Is it a laminova oil cooler?
@findtherightbeat6 жыл бұрын
sorry just saw the answer on another comment hehe
@hunterrussell27675 жыл бұрын
What itb are u running
@EpicBurnReturn3 жыл бұрын
Forged water pump?
@SCKAPEE3 жыл бұрын
Standard
@ervin92163 жыл бұрын
Świetny projekt. Wzoruję się na nim konstruując własne ITB do mojego D13Z6. Sam to stroiłeś?
@SCKAPEE3 жыл бұрын
Wstepnie sam mapy zrobilem tylko do odpalania (ja tam mam jeszcze bisimoto stage 3 walek) i jak juz mi odpalal to zaciagnalem do profesjonalistow - masz moj temat na CKPL tam sporo swojego czasu pisalem.
@GamerPro-nw5lf2 жыл бұрын
D16 engine?
@86_craig7 жыл бұрын
all ready for the 9th?
@SCKAPEE7 жыл бұрын
hahaha.... NO! now im changing camshaft... then ECU, then mapping...
@86_craig7 жыл бұрын
hopefully before summer then! i may possibly have my other car running and ready by then
@SCKAPEE7 жыл бұрын
:-P
@bjerguotou38536 жыл бұрын
Very nice. Which mods do you think work best with d13b2 block? Im thinking of getting one of them fancy danstengineering bike carb kit
@vital5774 жыл бұрын
Props from Tijuana
@infinitig35497 жыл бұрын
Do you have to tune the ecu when you do a itb install?
@SCKAPEE7 жыл бұрын
yes
@zikang92496 жыл бұрын
What is that blue cylinder on the itb ?
@SCKAPEE6 жыл бұрын
vacuum collector for brake servo - but was too big and didnt work well... changed into smaller one.
@zikang92496 жыл бұрын
How did u make your car run to 100km/h under 6sec ?
@SCKAPEE6 жыл бұрын
light weight, short gear ratio
@findtherightbeat6 жыл бұрын
@@SCKAPEE what gear ratio are you running, thanks! Still D13 + vtec with the ITBS?
@SCKAPEE6 жыл бұрын
@@findtherightbeat FD - 4,437 1 - 3,250 2 - 1,900 3 - 1,346 4 - 1,033 5 - 0,878 yes, still d13 ITB 175bhp - but... didnt have time for my toy this year and didnt drive some like 8 months now... :/
@Metin2PLTYTANIS4 жыл бұрын
I co żyje ta Honda jeszcze ?
@SCKAPEE4 жыл бұрын
zyje, zyje... tylko od 2 lat nia nie jezdzilem...
@artemborovikoff27735 жыл бұрын
What is the mufler?
@SCKAPEE5 жыл бұрын
it is custom made exhaust.
@findtherightbeat6 жыл бұрын
I got your reply, how do I find you on facebook?
@SCKAPEE6 жыл бұрын
TYPE SCKAPE ;)
@findtherightbeat6 жыл бұрын
@@SCKAPEE I tried messaging you messenger, not sure if I got the right person
@SCKAPEE6 жыл бұрын
@@findtherightbeat yellow skull - sckape
@SCKAPEE5 жыл бұрын
or Piotr Gaczkowski -yellow scull avatar
@pawelyarosz16864 жыл бұрын
Źle to poustawiane. Przepustnice do synchronizacji.
@SCKAPEE4 жыл бұрын
Przeciez napisane jest w tytule ze to pierwsze odpalenie bylo...
@pawelyarosz16864 жыл бұрын
A bylo zle?
@SCKAPEE4 жыл бұрын
@@pawelyarosz1686 przepustnice byly ok, ale tu jeszcze b. ostry walek wskoczyl
@pawelyarosz16864 жыл бұрын
Tak czy siak dobrze nie bylo ;) spoko ci to wyszlo. Dopingowalem ten projekt ladnych kilka lat temu na c5g forum. Teraz trafilem na filmy. Gratuluje podejscia. Podro. Ps. Jezdzisz tym jeszcze?
@SCKAPEE4 жыл бұрын
@@pawelyarosz1686 po tym jak w pierwszym sezonie wygralem chanpion ship w mojej klasie w sprinach uznalem ze konkurencja byla za slaba bo czasy mialem katastroficznie duzo mniejsze od innchych, szczerze to polowe 2 litrowek kosilem... no i po tym 1 sezonie uznalem ze nie ma sesu latac w tej klasie i chcialem przejsc do 2l (to bylo 2 lata temu) no ale niestety mialem wtope w pracy, stracilem z 200.000 :/ a to bylo moje siano na chate ktora mialem kupic.. i milem wybor albo sie bawic albo odrobic straty wiec civic stanal na podjezdzie nieruszany, po poltora roku sie odkolem i postanowilem na poczatku roku reanimacie i starty w prawdziwych wyscigach a nie w jakichs tam zawodach - zapisalem sie na kurs zeby zrobic licencje wyscigowa i... ...i huj zaczela sie korona wirus, poodwolywali wszystkie kursy itd... Generalnie siedze teraz w takim zawieszeniu i czekam ale chyba bedzie lipa juz z tym sezonem... zobaczymy... Ale generalnie civica nadal mam, raz na pare miesiecy sie nim po ulicy przejade pod domem zeby sie zupelnie nie zastal - i tak to wyglada. Jak juz zrobie licencje to zdecyduje czy ladowac K20 czy opchnac civica i kupic sobie EVO. ale to dopiero po zrobieniu licencj. OT CALA HISTORIA ;)
@TheCitizenErazed4 жыл бұрын
So much rice
@gurjindersingh1994 жыл бұрын
It's literally a fucking track car how is that rice ?