Civic Truck Project Ep.4

[@ACCORDriver_NL]

Make sure you can always access the shocks in the rear. In case you need to replace them or do an upgrade, you should make like a small detachable panel there. Also make sure it's a bit higher than your bed floor, in case new shocks are taller ...

[@mumleysgarage7144]

I’ll show you how I plan to do that next video!!

[@jordanhickman]

Just found your channel, sub’s from Utah. Big fan of Hondas, big fan of utes. Can’t wait for more progress, keep it up 🤘

[@mumleysgarage7144]

Thanks man!! More to come!

[@jordanhickman]

Any progress updates on this truck?

[@Skudster13]

I'd love to see you put out more content. I think you're off to a great start and this project is awesome! If you come up to a stumbling block on the build, make a 2-3 minute video showing the issue and let the comments help you, even if they're nothing more than a muse to get you the idea you need. Can't wait to see more of this build!

[@mumleysgarage7144]

Thank you I’ll take that advice!!

[@ricardoj.martinezmalavet2027]

👍

[@HaierUp]

Look into Dubby energy they do little sponsorships type things.

[@mumleysgarage7144]

Thank you!!

[@weskillall]

following this build! lets go!

[@mumleysgarage7144]

Thank you!!

[@josedejesusperez4568]

Project is really cool man, going to be an awesome little truck

[@mumleysgarage7144]

Thank you!!!

[@frias2287]

Nice one bro 👍 🔥⛽️🚘👍🐐

[@Grant7]

What color are you going to paint it?

[@mumleysgarage7144]

To be continued 😂😂

[@mac4427]

Gonna need an access panel for the fuel pump also. Dropping the tank for a fuel pump would suck.

[@mumleysgarage7144]

Next video will show how that will work! 😬

[@mikeskustomgarage6463]

to add to Accordrivers comment be sure you can also access the fuel pump. i put a door in my Altima truck to access that.

[@mumleysgarage7144]

Check out the next video to see how that will work!

[@aaront4494]

Hey brother, I’m just glad to see the videos. It’s a cool project to follow. We all have lives and know how builds go (or at least should if you’ve ever built something). So when you’re able to post I’ll be watching.

[@mumleysgarage7144]

Thank you!!!

[@timothygingras]

Can't wait to see the bed all fit and welded 🤙

[@mumleysgarage7144]

Sooooon!

[@jonnymiskatonic]

There we go!

[@carbongecko]

@1:22 will you incorporate a drain for the roof rail? just curious, i like the build so far.

[@mumleysgarage7144]

I like your thinking, I should address that issue!

[@GT.Bugger]

Just found your channel. I love seeing people fabricate and do something different. I understand you timelapsing a lot of stuff, it's hard to make welding interesting and fun to watch lol

[@mumleysgarage7144]

Thanks man!!! I hope you keep enjoying

[@tbdogfosters]

looks amazing mate 👍

[@mumleysgarage7144]

Thanks dude

[@C.p-q2x]

Finally some on made my dream car. I did wanted to do the same thing to my del sol.

[@mumleysgarage7144]

Hope you enjoy!

[@_autoverse]

You’re making great progress, I’m intrigued to see the end result. Nice work on the B-pillar and capping off the sides, looks like you’ll have a decent little truck when you’re done. A quick suggestion, perhaps maybe you could add underfloor storage accessible from the inside to shove the stuff you only need occasionally.

[@mumleysgarage7144]

It’s a thought! Next video will show some stuff like that, I’ll take your input into consideration!!

[@miguelpagansr6128]

It’s looking really good so far, I noticed that you have no access to the strut towers and spare tire due to everything being fully welded.

[@mumleysgarage7144]

Check out the next video to see how I make that happen

[@RTRtm13]

Cant wait for you to get monetized 🎉

[@mumleysgarage7144]

Thank you! Me too!!

[@Tea18236]

Looks sick, keep it up bro

[@mumleysgarage7144]

Thank you! Will do!!

[@mattcrotts8370]

Nice work! I am enjoying the videos.

[@mumleysgarage7144]

Awesome thank you!!

[@dannydodge7191]

Unless you’re going to turn that daily into a pickup truck. lol. This is very cool stuff. Definitely would’ve loved to see much more of the entire build. My advice is find another civic hatch and start over. Now that you’ve hooked a certain audience.

[@mumleysgarage7144]

Thank you!! I should have recorded a lot sooner, it sort of happen and then everyone said…. Record it!!! So here we are!

[@philjohnston9616]

Nice progress. Keep up the good work. Look forward to seeing more. Thanks for sharing

[@mumleysgarage7144]

Thank you!! Hopefully get back to it real soon!

[@obleter]

This is a great project, it is going to be real cool when completed. I would have made the floor lower and make it so you access to under the floor if you need to get in there.

[@mumleysgarage7144]

Floor was going to be lower but it caused a lot more work, maybe if I do another one I’ll fix a lot of small issues

[@Superb_Owl80]

This is cool, man! Its sad to see a hatch go, but it sounds like it was wrecked, so way to save a Civic!

[@mumleysgarage7144]

It was pretty rough! It was a perfect car to start with

[@donleydoesthings8643]

Love the b roll at the end😎 cant wait to see it with a floor welded in and epoxied! Awesome video bro

[@mumleysgarage7144]

B roll b beautiful

[@Letsgocarcruising]

Nice work. My friend @mikeskustomgarage is doing similar stuff in CT.

[@ronsonkawewehi7985]

One of my favorite Honda eg hatchback… my dream car is a ef hatchback

[@mumleysgarage7144]

EF would look cool as a truck!!

[@josemontero4145]

next part please

[@blacknightcreations]

Apparently this video is recommending my video, subscribed to see if you’re doing things differently to my E30 M3 truck build.

[@mumleysgarage7144]

Thanks hopefully you can gain something that will help!

[@johnnymack8442]

That metal work looks good.

[@mumleysgarage7144]

Thank you!!!

[@TheJNALife747]

🔥🔥🔥LOVE THIS BUILD BRO👌🏽

[@mumleysgarage7144]

Thanks my man!!!

[@TheJNALife747]

@@mumleysgarage7144 for sure brother ..here to show love and support.God bless 🙏🏽

[@dannydodge7191]

And poof! it’s all done. Trust me. Placement and fitment is what KZbin viewers want to see.

[@mumleysgarage7144]

I agree, watching back, I missed so much. It’s a learning experience

[@SpiritedAdventures-wb4eb]

Just been watching your videos, looking good tho,but I noticed when you weld the read floor in how are you going to get to your rear shocks if you end up changing them ??😮

[@mumleysgarage7144]

Next video will show how I’ll access the struts! Stay tuned