1988 CRX Si Restore Part 21 - Assembly & Teardown

[@HondaStreetGarage]

Awesome work as always!!!

[@rushmatic]

Watching you clean the OEM intake tubing really makes me wish that I never threw mine out 15 years ago for an AEM CAI… pain points of being young and dumb.

[@hugorodrigues1057]

The love, the passion, the dedication, the knowledge , professionalism, the time, thank you . Please continue to restore this pieces of art. We need more of you. I’d love to see a k20 engine build/swap with your quality if one day you decide to do something of that. Or maybe you do already I’m new to your channel, but always waiting for new videos now. Keep the excellent work and dedication , I hope all comes good in your life.

[@Tony-ib2vm]

Those gold bolts, got me pulling every 92-95 door card in the junkyard.

[@pachecodc5]

I can't tell you great job and good content each and every video. So this time, Ill just say, project is coming along nicely and this will be a great example of a CRX!

[@pvang95]

Thanks for the video Seth!!! I was struggling with the sway bar links. Now, I know what to do. 😂

[@antoniogonzalez5993]

Always enjoy the CRX builds. Keep them coming.

[@Darthvolvo]

Loving the attention to detail! It will pay off when you sell.

[@wheelsofsteel]

Look into getting a hub shark. You can change wheel bearings without removing the spindles. Works great. Just use your 1/2 impact gun.

[@davidbeverly3463]

I'll have to check the hub shark out 🤔 @crxseth when I did my wheel bearings on my 97 Civic EX coupe I bought the Maddox front wheel drive bearing remover & installer kit from harbor freight for 125$ and did em by hand with 1/2 inch ratchet. Would've been faster and easier with impact but need to invest in that too lol

[@wheelsofsteel]

You won’t regret purchasing the hub shark. Matco tools also offers one. As much restoration work you do it will pay for its self. No more $40-$80 dollar shop fees.

[@johnrodgers1847]

You sir, make me happy. Great job on the restoration. And Thank you as awkward for sharing. God bless you.

[@victorwilks88]

The channel that just keeps growing

[@tobinschroeder537]

Great job Seth! Love you attention to detail! It’s going to be a beautiful car when you’re done!

[@jessy2904]

this is the most satisfying vid I've watched

[@z32luvr]

Great work as always Seth.

[@v-gc7257]

Nice restoration. Wow

[@codhub7095]

I love watching your videos, keep it up!

[@jeffhan25]

Love this series! That front suspension was gross. Can’t wait for the next one.

[@oldskool1979]

OCD is a good thing... when it comes to restoring CRX EF things ! yuuup !

[@jfply8]

Amazing work, you should get a sand blasting cabinet.

[@crxseth]

If I had space, I definitely would.

[@hecks_k20_fa5]

Wow congrats Seth almost to 25k!👊🏾 I remember when you had like 1k when I subscribed to your channel!👍🏾

[@crxseth]

It’s growing fast! Thanks for sticking with me!

[@sonhuynh8222]

Great content as always ….. looking forward to the next one 🤙🏽

[@grizzlyaddams3606]

Radiator holders never looked so g ooo d...

[@tonyekthree]

Seth your content is badass...

[@atemegabites2251]

Awesome content . I love the edits, lots of other channels just talk and yap non sense lol.

[@swide2750]

that paint job and zinc bolts😩

[@chriswinters4527]

Go to harbor freight and get the wheel bearing press kit. Works awesome! Skip the shop!

[@magno408_1]

What it called

[@jimmystop]

it looks like you could have retrobright the fan blades. also have thought about getting setup so you can re zinc plate your bolts. it would save having to buy new ones.

[@crxseth]

I’ve considered that, but haven’t gotten that far yet. It’s very time consuming to restore bolts.

[@familyengineering5591]

Seth dana has some videos of using a heat gun to rejuvenate old plastics maybe that will work for the intake box. Also Godwilling im moving to knoxville soon. Will def be at honda dragon event in oct if im there

[@crxseth]

Maybe I’ll see you there!

[@ynohtna1126]

Legendary man!! What spray paint do you use? I’m wanting to do the same for my wife’s DA I’ll be building.

[@crxseth]

I use different paints to be honest. Just depends on what I'm painting.

[@sold_tortoise5712]

Nice content as always man. are you going to do an oem replacement or an aftermarket setup?

[@crxseth]

Just OE replacement and probably some coilovers to lower the car some.

[@traktion9]

Great editing and camera work, straight to the business I like it, your channel will grow fast. Curious what type of wheel did you use to get the rust off those parts?

[@sevenmileshome]

looks like a nylon wheel? not sure though

[@crxseth]

It is. Link in the video description.

[@marcoreis1214]

Really good job. I am doing something similar with 2 cars, the Carzy (my daughter's Civic), and the PurpleMobil (my Caravan). As stupid it may sound, all the cars in our family have names. I am watching many different Chanels and videos, and getting good ideas that I am using on the cars. Just a suggestion if I may (and it would help me, or someone else, a lot), for people like me that likes to let the mind to run everyting after watching the videos and visualize how to apply (if the case) on what I need to do, just the mention of which products (I will keep the name out, mas I recognized the can brand for the Primer, but I am not sure for the after Primer), or which kind of product (self Itching Primer and ?), you were using, would be an enormous help. Thanks a lot

[@crxseth]

Any primer should do the trick. There is nothing special about the brands I chose.

[@arockpcb1347]

That girl is looking good

[@bodevaughn1599]

Hey I saw in one of your previous videos that you use one of your civics to drive to work, if you don't mind me asking what do you do for work beside youtube?

[@crxseth]

Electrical Engineer. This KZbin isn’t really making money. Maybe one day it will, it it’s mainly just a hobby and a personal goal I’ve set for myself.

[@magno408_1]

@@crxseth keep up the good content!

[@101spacecase]

I swear ever single inch of this car was dirty.

[@TealEF90]

Hey Seth Any way you could help me out? What axle do you have in the b16 crx. I have a 90 civic hatch with a gsr and ls cable trans. I'm currently using all 93 integra axles and half shaft. My problem is vibration when accelerating. Any idea how to remedy this

[@crxseth]

I’m just using DA axles. I’m not sure other than to simply start ruling things out. It’s obviously on some rotating piece, so start ruling each one out and you’ll eventually find the source.

[@TealEF90]

@@crxseth thanks for the reply I'm leaning towards the cheap autozone axles I have.

[@TealEF90]

@@crxseth also are you using hasport mounts? If so does your driver side mount have a split in it where it bolts to the post mount

[@crxseth]

@@TealEF90 Yes, Hasport. I’m not sure what you mean by split?

[@TealEF90]

@@crxseth emailed hasport and they said it's not supposed to be, and they will replace it for free

[@land0_built]

What camera do you use to record?

[@crxseth]

Canon 6D

[@TheGT6Crew]

I imported a 88 crx si from japan do you have any sites for parts?

[@crxseth]

Most of my stuff is just from individuals on Facebook and Instagram.

[@cheuknamchan2064]

幾時有新片出呀

[@toddboisvert8168]

#SavetheEF

[@victorwilks1110]

Brilliant as always...like share and subscribe

[@manuellopezej1]

Need to get a press from harbor freight

[@crxseth]

I’ve run out of room!

[@dxz3]

how much are you selling this crx for once you’re done? i’ll buy it - i live in ohio so i’m close

[@crxseth]

I don’t have a price yet, not a completion date, but I have $6,000 invested in the car thus far. It will be priced $10-12k most likely.

[@Waveito2]

Not bad but I did see 3 specs of dust so it’s not 100%

[@oldskool1979]

I counted 4 specs of dust...

[@rashidgujar4678]

Hy Bro Wher from

[@Ken-rw2vh]

pքɾօʍօʂʍ 💖

[@oldskool1979]

I dont like those ugly shiney silicone rad hoses you used though lol

[@crxseth]

They were free so I made use of them. ;)

[@oldskool1979]

@@crxseth excuses excuses... lol

[@kaiserchaoui6143]

@@oldskool1979 his project car, He does what he wants with it.

[@oldskool1979]

@@kaiserchaoui6143 No..us CRX owners have to meet certain standards ! haha