Beam, Column, Slab and Foundation design by using STAAD Pro V8i Software

[@sivaprakasansivaprakasan1479]

Done Wounderful. Super.... Continue.......

[@manojm6219]

Super... It is very helpful to me.

[@prafullwadavraopv9801]

Thank u sir..it's really helpful to all of us...great job

[@civilengineeringbyshravan9596]

It's my pleasure

[@lasanafofana3403]

This is really informative, I learned a lot from this video; Beam, Column, and Slab Design in one kick. Quick question, how do you get/resolve the warning sign, and what does it mean for your design? Plus, can u repeat a similar video with different slabs dimensions?

[@shreydutta1904]

In STADD we did not model the slab because when we use plate element to model slab the stiffness of plate is very much higher and all the forces and bending moment will be taken by the slab. Compare the bending moment in beams with and without modeling the slab. If you model the slab then you have to considered that slab also taking part in earthquake forces.

[@mastitour2899]

Thanks.....Video is very good but speed is high. Please make a complete video for beam, slab, column, chajja, staircase and foundation design for multistorey building.

[@dhanuvirat3901]

Thank for ur videos I always support u ...!!👌

[@notre115]

thanks for your vdo.

[@NithishKumar-uh3wi]

Thank you bro

[@sanjeev433]

Nice video.

[@CarMusicMania]

Thanks from your great video, it really helped me :)

[@dalveersingh582]

Great

[@rahmanrahmani2896]

Excellent but you are too fast to be followed specially for the beginners . Thank You!

[@civilengineeringbyshravan9596]

Definitely I will try to reduce my speed from my next video

[@eiq107]

@@civilengineeringbyshravan9596 no speed is really good, for people feeling high speed, tell them pause and seppd reduction option is there in KZbin

[@pavankalyanannam1111]

At 5:17 how you showed deflection...by pressing which key...

[@civilengineeringbyshravan9596]

Use roll in mouse and control button

[@gelor5050]

Nice one but just a question d slab with is always 100mm don't understand dat even when using a different value of slab width

[@amitindrasarkar1199]

nice sir ji, Thank you sir

[@vivekkancharla3249]

plz post a video modelling flat slab with drop and column head ;

[@civilengineeringbyshravan9596]

Sure I will do as soon as possible

[@tnnammacontrol3913]

@@civilengineeringbyshravan9596 Load applied on structure video upload pls

[@muthushanmugam]

excellent

[@civilengineeringbyshravan9596]

Thank you very much

[@gharnakshacom]

Sir How to find out no. Of bar and bar size and spacing for slab design in staad pro

[@cesargonzalezorozco9321]

thanks man!

[@smithas6621]

How to put frames of different size for an entire house analysis. Frame dimensions changes according to the room dimensions, how to do that?

[@jaybadoni8084]

how did you cheak the deflection just after analysis

[@kaleswars8600]

Sir I have one dought ,can you clarify me ....how do we found proper size of columns, beams and plate thickness

[@allaboutcivilengineering.]

For this we have to perform design which is not shown in this video. Only the analysis part has been shown here. While designing the software itself will show whether the beam columns are passing or failing for any particular load.

[@civilmoments5706]

Sbc is not required?

[@erprakashchand6371]

Hello sir...i am cofused by the no. And fia of bars which comes after rcc design as per is 456 2000...is that bars are enough for practical use... which comes 10 and 12mm in every Beam...in anyone reading my comments plz reply

[@civilengineeringbyshravan9596]

It is the final reinforcement as per our assumed load cases but in real projects we will take more load cases then it will give you proper reinforcement

[@erprakashchand6371]

Thanks a lot.....can you design a building with maximum load assuming which will give final details which we can share to client

[@sudhakarvishnupurikar2563]

Dear Sir, Why we take BS code into account once IS456 is adopted.

[@civilengineeringbyshravan9596]

for slab members design I was assumed BS code

[@sundharagoutham9392]

Super

[@civilengineeringbyshravan9596]

Thank you 👍🏻

[@justinadam3679]

How to check slab reinforcement just like beam and column please tell us

[@oscarvaron5024]

convert the LL load from 2.5kN-m2 to kN-m to the contour of the beams?

[@tnnammacontrol3913]

Nice

[@civilengineeringbyshravan9596]

Thank you 👍🏻

[@flutedilse4264]

How to set secondary beams?? and column anywhere??

[@erprakashchand6371]

Hello sir..... kindly tell me how I can do permanent of trail version of staad pro

[@dhanuvirat3901]

Pls do interactive concert design in staddpro...

[@civilengineeringbyshravan9596]

Definitely

[@SonetThomasP]

Good one but too too fast for beginners

[@androidguy7000]

In slab design report, it is showing AS P. and AS R. What does that mean? Please simplify the report. How to conclude the analysis report and give details to the contractor?

[@civilengineeringbyshravan9596]

ASP is area of steel to be provided ASR is area of steel to be required with the help of the report will conclude the Ast required and Ast Provided then we need to give extra reinforcement for slab element which is greater that Ast for our safety......

[@structuraldrawingsforfresh9437]

Part by part video banao sir

[@civilengineeringbyshravan9596]

Ok sure 👍🏻

[@nutchanonjiwprasert2112]

Sorry I want to know how to know Area steel min. Can you tell me please thank you

[@ChiragPatel-fk4rz]

Bhai hame bhi sikha do yar thoda dhire se.

[@executiveengineer8927]

Can u please share steel truss design through stad pro.

[@civilengineeringbyshravan9596]

Definitely I will explain u soon

[@erprakashchand6371]

Hello

[@jainikshah3875]

9:36 As(%) used in your design is 0.5% but minimum limit is 0.8%. Similarly in my design, the As% is 0.67 and min. Limit is 0.8% as per IS code. So sir how can we rectify this mistake. Thanks.

[@moonjyotiyt7554]

I am also suffering from this problem

[@s.m.asaduzzamanreshad575]

I can't move on to foundation design. No option for ''run as staad foundation / advanced staad foundation'' will you please help

[@civilengineeringbyshravan9596]

Text me to my mail I will share u Software link

[@s.m.asaduzzamanreshad575]

Can I have your email id

[@civilengineeringbyshravan9596]

[e-mail]

[@rstomar9495]

i didn't understand why the slab divided in three part during surface creating

[@harveyzhu4377]

the way he model the slsb is wrong

[@samel8572]

ok

[@prashantsrivastava372]

Many details are missing..

[@civilengineeringbyshravan9596]

Please check it once again

[@Islamicfiqhchannel]

Ok

[@prashantsrivastava372]

You can contact me for exact explanation

[@NikhilSingh-mw9fn]

Baii plzz pdf dede report submit krni hai

[@aniruddhanarvekar7969]

Bhai itna fast bol bhi kaise leta hai tu.. sunne se pehele khatam ho jati hai teri sentense

[@bhupendrakumarpatel7490]

VERY SERIOUS MISTAKE YOU COMMITED . YOU HAVE TAKEN INDIVIDUAL LOAD CASE FOR DESIGN . YOU SHOULD ENETR LOAD COMBINATION OF DEAD LOAD AND LIVE LOAD WITH APPROPRIATE FACTOR. BECAUSE DEAD LOAD AND LIVE LOAD ARE ACTING SIMULATANOUSLY

[@behrouzchegeni9188]

For God's sake, can you stop saying OK!!!!